Information injection-pump assembly
BOSCH
9 400 615 253
9400615253
ZEXEL
101603-8242
1016038242
ISUZU
8943937532
8943937532

Rating:
Service parts 101603-8242 INJECTION-PUMP ASSEMBLY:
1.
_
7.
COUPLING PLATE
8.
_
9.
_
11.
Nozzle and Holder
8-94394-906-0
12.
Open Pre:MPa(Kqf/cm2)
18.1{185}/22.1{225}
14.
NOZZLE
Cross reference number
Zexel num
Bosch num
Firm num
Name
101603-8242
9 400 615 253
8943937532 ISUZU
INJECTION-PUMP ASSEMBLY
6HE1-TC1 K 14BF INJECTION PUMP ASSY PE6AD PE
6HE1-TC1 K 14BF INJECTION PUMP ASSY PE6AD PE
Information:
Engine Crankshaft Will Not Turn Recommended Procedure1. Low or No Battery Voltage ... Check battery voltage. If battery voltage is less than 8 volts for a 12 volt system, or 16 volts for a 24 volt system, put a charge to the battery. If battery will not hold a charge, load test the battery as shown in the ELECTRICAL SYSTEM of the Testing and Adjusting section of this Service Manual.2. Bad Switch, Bad Wiring or Connection in Switch Circuit ... With ignition switch in START position, check voltage at switch connection on starter solenoid. If there is no voltage, or if the voltage is low at this connection, check wiring, connections, ignition switch, and magnetic switch (if used).3. Bad Cable or Connection; Battery to Starter... With ignition switch in the START position, check voltage at connection of battery cable to starter. If there is no voltage, or if the voltage is low at
Have questions with 101603-8242?
Group cross 101603-8242 ZEXEL
Isuzu
Isuzu
101603-8242
9 400 615 253
8943937532
INJECTION-PUMP ASSEMBLY
6HE1-TC1
6HE1-TC1