Information injection-pump assembly
ZEXEL
101603-2091
1016032091
Rating:
Service parts 101603-2091 INJECTION-PUMP ASSEMBLY:
1.
_
7.
COUPLING PLATE
8.
_
9.
_
11.
Nozzle and Holder
236002710A
12.
Open Pre:MPa(Kqf/cm2)
17.7{180}
15.
NOZZLE SET
Cross reference number
Zexel num
Bosch num
Firm num
Name
101603-2091
INJECTION-PUMP ASSEMBLY
Information:
Piston Pin Bearing Removal And Installation (Connecting rods that have straight sides on the piston pin end).
The 5P8639 Press Group and the 5P8655 Tool Group are used to remove and install the piston pin bearings in the connecting rods. Use the procedure that follows to remove and install the piston pin bearing from the connecting rod.Remove the crankshaft bearing from the large end of the connecting rod and install the cap on the rod.Put the connecting rod in an oven and get the temperature of the rod to 400°F (204°C).Put the 5P8654 Spacer in the counterbore of the base plate. Be sure the spacer is in the bore straight and is against the bottom of the counterbore. Put the
The 5P8639 Press Group and the 5P8655 Tool Group are used to remove and install the piston pin bearings in the connecting rods. Use the procedure that follows to remove and install the piston pin bearing from the connecting rod.Remove the crankshaft bearing from the large end of the connecting rod and install the cap on the rod.Put the connecting rod in an oven and get the temperature of the rod to 400°F (204°C).Put the 5P8654 Spacer in the counterbore of the base plate. Be sure the spacer is in the bore straight and is against the bottom of the counterbore. Put the
Have questions with 101603-2091?
Group cross 101603-2091 ZEXEL
Hino
Hino
101603-2091
INJECTION-PUMP ASSEMBLY