101602-8050 ZEXEL 9 400 614 920 BOSCH INJECTION-PUMP ASSEMBLY 9400614920 1016028050 1156030850


 

Information injection-pump assembly

BOSCH 9 400 614 920 9400614920
ZEXEL 101602-8050 1016028050
ISUZU 1156030850 1156030850
101602-8050 INJECTION-PUMP ASSEMBLY
Rating:
26
Buy INJECTION-PUMP ASSEMBLY 101602-8050 zexel genuine, new aftermarket engine parts with delivery

Service parts 101602-8050 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-8130
3. GOVERNOR 105410-6080
4. SUPPLY PUMP 105220-7260
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156639-3620
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4372
11. Nozzle and Holder 5-15300-103-2
12. Open Pre:MPa(Kqf/cm2) 14.7{150}
13. NOZZLE-HOLDER 105030-3391
14. NOZZLE 105015-3930
15. NOZZLE SET

Include in #1:

101602-8050 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

Zexel num
Bosch num
Firm num
Name
101602-8050 
9 400 614 920 
1156030850  ISUZU
INJECTION-PUMP ASSEMBLY
6BD1 K 14BE INJECTION PUMP ASSY PE6A PE




Information:

Cooling System
The centrifugal-type water pump mounts on the front cover and is belt driven by the crankshaft pulley. The pump has two outlets. Coolant from the outlet on the right side of the pump flows through a passage in the front cover to the left bank of the engine, and coolant from the outlet on the left flows to the right bank.The coolant circulates through the block to the cylinder head. Coolant flows from the heads through connecting sleeves to the return manifold in the front cover. Orifices in the sleeves control the flow from the heads.Part of the coolant to the left bank is diverted from the block to the oil cooler. External lines direct coolant from the block to the cooler and back to the return manifold in the front cover.An internal passage in the front cover directs the coolant from the return manifold to the water pump inlet. If the thermostats are closed the coolant flows to the pump and is recirculated through the engine. If they are open, coolant flows from the return manifold to the radiator and from there to the pump.The radiator is constructed with a top tank above the core and an expansion tank either above or separate from the top tank. A vent tube connects the radiator top tank and the expansion tank. The expansion tank has a shunt line which connects to the water pump inlet. This shunt system maintains a positive, static head of coolant at the pump inlet to prevent cavitation under all operating conditions. When filling the cooling system, coolant from the expansion tank flows through the shunt line to the water pump inlet and fills the engine block from the bottom. By filling the system from the bottom, air in the system is forced out through the top tank, through the vent tube into the expansion tank.The two thermostats are located at the inlet to the water pump. The inlet-regulated cooling system maintains positive coolant temperature control with decreased engine warm up time.When the thermostats are closed, coolant is circulated through the block and heads and back to the water pump by way of an internal passage in the front cover. When the thermostats are open, the bypass flow is restricted and the engine coolant flows through the radiator and returns through the inlet elbow to the water pump. Without the thermostats installed, the coolant will continually bypass the radiator, and overheating will result.Electrical System
The electrical system is a combination of three separate electric circuits: the charging circuit, the starting circuit and the lighting or load circuit. Each circuit is dependent on some of the same components. The battery (batteries), disconnect switch, circuit breaker, ammeter, cables and wires from the battery are common in each of the circuits.The charging circuit is in operation when the engine is operating. The electricity producing (charging) unit is an alternator. A regulator in the circuit senses the state of charge in the battery and regulates the electrical output to

Have questions with 101602-8050?





Group cross 101602-8050 ZEXEL

Isuzu 

9 400 614 917 
1156030800 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 610 610 
1156030810 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 918 
1156030820 
INJECTION-PUMP ASSEMBLY
6BB1
9 400 610 611 
1156030830 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 919 
1156030840 
INJECTION-PUMP ASSEMBLY
6BD1
101602-8050  
9 400 614 920 
1156030850 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 921 
 
INJECTION-PUMP ASSEMBLY
6BG1

Isuzu 

9 400 614 921 
1156030860 
INJECTION-PUMP ASSEMBLY
6BG1
9 400 614 922 
1156030870 
INJECTION-PUMP ASSEMBLY
6BD1
 
1156030880 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 614 923 
 
INJECTION-PUMP ASSEMBLY
6BG1

Isuzu 

9 400 614 923 
1156030890 
INJECTION-PUMP ASSEMBLY
6BG1
Back to top