101602-2431 ZEXEL 9 400 614 773 BOSCH INJECTION-PUMP ASSEMBLY 9400614773 1016022431 220006111a

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH 9 400 614 773 9400614773

ZEXEL 101602-2431 1016022431

HINO 220006111A 220006111a

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101602-2431 zexel genuine, new aftermarket engine parts with delivery

Service parts 101602-2431 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-9931

3. GOVERNOR 105921-3340

4. SUPPLY PUMP 105220-5140

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE 156636-8820

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-5090

11. Nozzle and Holder 23600-2080A

12. Open Pre:MPa(Kqf/cm2) 17.7{180}

13. NOZZLE-HOLDER 105041-5041

14. NOZZLE 105015-8130

15. NOZZLE SET

Include in #1:

101602-2431 as INJECTION-PUMP ASSEMBLY

106671-4971 as _

Cross reference number

BOSCH 9 400 614 773 9400614773

ZEXEL 101602-2431 1016022431

HINO 220006111A 220006111a

Zexel num

Bosch num

Firm num

Name

101602-2431

9 400 614 773

220006111A HINO

INJECTION-PUMP ASSEMBLY
W06E * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-5720

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.1 3.07 3.13

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.75 60.25

Difference between angles 2
Cyl.1-2 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cal 1-3 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-5 deg. 300 299.75 300.25

Injection quantity adjustment

Adjusting point -

Rack position 9.4

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 45.9 43.9 47.9

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 8.5+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 9 7.5 10.5

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Injection quantity adjustment_03

Adjusting point A

Rack position R1(9.4)

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 45.9 44.9 46.9

Basic *

Fixing the lever *

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.2

Pump speed r/min 1200 1200 1200

Average injection quantity mm3/st. 59.7 55.7 63.7

Fixing the lever *

Injection quantity adjustment_05

Adjusting point C

Rack position R1-0.4

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 26.1 22.1 30.1

Fixing the lever *

Injection quantity adjustment_06

Adjusting point I

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 92 92 102

Fixing the lever *

Rack limit *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=E30
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=55mm
----------
a=34deg+-5deg b=(35deg)+-3deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=40deg+-5deg b=40deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)

Information:

Illustration 1 g06545921
Typical view inside the DEF pump
(1) Internal heater blanket
Illustration 2 g06545997
Typical view of the DEF pump heater blanket
(2) Pump head heater (top)
(3) Positioning blocksAdaptable To:
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Illustration 3 g06546003
Typical view of the DEF pump identification label
(4) Part number
(5) Serial number
(6) Date code
Table 1
Part Number Description Serial Number Date Code
466-8285 Diesel Exhaust Fluid Pump Gp (12 V) 19357001 19D357
533-2738 Diesel Exhaust Fluid Pump Gp (24 V) 20058030 20D058 Refer to Table 1 for the effective serial number and date code of the improved heater blanket. Refer to Illustration 3 for the location of the DEF pump identification label.