101602-1562 ZEXEL 9 400 614 746 BOSCH INJECTION-PUMP ASSEMBLY 9400614746 1016021562


 

Information injection-pump assembly

BOSCH 9 400 614 746 9400614746
ZEXEL 101602-1562 1016021562
101602-1562 INJECTION-PUMP ASSEMBLY
Rating:
21
Buy INJECTION-PUMP ASSEMBLY 101602-1562 zexel genuine, new aftermarket engine parts with delivery

Service parts 101602-1562 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101062-8040
3. GOVERNOR 105411-1782
4. SUPPLY PUMP 105210-5450
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156637-7220
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4850
11. Nozzle and Holder ME078538
12. Open Pre:MPa(Kqf/cm2) 17.7{180}
13. NOZZLE-HOLDER 105030-3350
14. NOZZLE 105025-1870
15. NOZZLE SET

Include in #1:

101602-1562 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
101602-1562 
101602-1563 
9 400 614 746 
   
INJECTION-PUMP ASSEMBLY
* K 14BF PE6AD PE




Information:


Table 1
S O S Oil Sampling Interval for Engine crankcase
Recommended Interval (1)(2) Oil Type
Every 250 Service Hours Cat DEO
Cat DEO-ULS
(1) Severe applications may require a more frequent oil sampling interval.
(2) Under certain conditions, the Cat dealer or the Operation and Maintenance Manual may allow a longer interval between oil samplings.Note: Refer to the Operation and Maintenance Manual for your engine for recommended oil drain intervals.Consult your Cat dealer for complete information and assistance in order to establish an S O S Services program for your engine.More Frequent S O S Sampling Improves Life Cycle Management
Traditionally, the suggested S O S sampling intervals for diesel engines have been at 250 hours. However in severe applications, more frequent oil sampling is recommended. Severe service for lubricated compartments occurs at high loads, in high temperatures, and in dusty conditions. If any of these conditions or other severe service indicators exist, sample the engine oil at 125 hour intervals. These additional samples will increase the chance of detecting a potential failure.Determining Optimum Oil Change Intervals
Sampling the engine oil at every 125 hours provides information for oil condition and for oil performance. This information is used to determine the optimum usable life of a particular oil. Also, more points of data will allow closer monitoring of component wear rates. Close monitoring also allows you to obtain the maximum use of the oil. For detailed information on optimizing oil change intervals, consult your Cat dealer.This Special Publication does not address recommended oil drain intervals. Refer to your engine Operation and Maintenance Manual, and consult your Cat dealer for additional guidance, including but not limited to guidance on establishing optimized and/or acceptable oil drain intervals.To reduce the potential risk of failures associated with extended oil drain periods, Caterpillar recommends that oil drain intervals only be extended based on oil analysis, and subsequent system inspections. Oil analysis alone does not provide an indication of the rate of formation of lacquer, varnish and/or other deposits on surfaces. The only accurate way to evaluate specific oil performance in a specific system using extended oil drain periods is to observe the effects on the system components. Making these observations involves tear-down inspections of systems that have run to the normal overhaul period while using extended oil drain intervals. Following this recommendation will help ensure that excessive component wear does not take place in a given application.Note: The use of Cat S O S Services oil analysis helps environmental sustainability as the best way to optimize oil life. S O S Services will help engines reach expected life. Consult your Cat dealer regarding the testing required to establish a safe, optimized oil drain interval.Standard oil drain intervals as published in engine Operation and Maintenance Manual are for typical applications:
Using recommended oils
Using good fuel
Using recommended filters
Using industry standard good maintenance practices
Following maintenance intervals as published in engine Operation and Maintenance ManualMore severe applications may require shortened oil drain intervals, while less severe applications may allow for longer than standard oil drain intervals. High

Have questions with 101602-1562?





Group cross 101602-1562 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 611 693 
ME088960 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 612 202 
ME078432 
INJECTION-PUMP ASSEMBLY
6D16
9 400 610 570 
ME088978 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 610 571 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 614 744 
ME088980 
INJECTION-PUMP ASSEMBLY
6D34T
9 400 610 572 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 116 
ME088981 
INJECTION-PUMP ASSEMBLY
6D34T
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 614 745 
ME088986 
INJECTION-PUMP ASSEMBLY
6D34T
 
 
INJECTION-PUMP ASSEMBLY
9 400 611 508 
 
INJECTION-PUMP ASSEMBLY
6D16T
101602-1562  

101602-1563 
9 400 614 746 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z10 975 
ME078537 
INJECTION-PUMP ASSEMBLY
6D16T
F 019 Z10 109 
 
INJECTION-PUMP ASSEMBLY
9 400 611 580 
 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 613 289 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z10 976 
ME078612 
INJECTION-PUMP ASSEMBLY
6D16T
 
 
INJECTION-PUMP ASSEMBLY
6D16T

Mitsubishi 

9 400 614 747 
ME078649 
INJECTION-PUMP ASSEMBLY
6D16T
F 01G 09U 1JL 
ME444579 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 613 157 
 
INJECTION-PUMP ASSEMBLY
6D16T
9 400 614 748 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z10 977 
ME078436 
INJECTION-PUMP ASSEMBLY
6D16T
Back to top