Information injection-pump assembly
BOSCH
9 400 613 114
9400613114
ZEXEL
101602-1271
1016021271
MITSUBISHI
ME047566
me047566

Rating:
Service parts 101602-1271 INJECTION-PUMP ASSEMBLY:
1.
_
5.
AUTOM. ADVANCE MECHANIS
6.
COUPLING PLATE
8.
_
9.
_
11.
Nozzle and Holder
ME070516
12.
Open Pre:MPa(Kqf/cm2)
17.7{180}
15.
NOZZLE SET
Cross reference number
Zexel num
Bosch num
Firm num
Name
101602-1271
9 400 613 114
ME047566 MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D14T K 14BE INJECTION PUMP ASSY PE6A PE
6D14T K 14BE INJECTION PUMP ASSY PE6A PE
Information:
If equipped with an air inlet heater (AIH) for cold weather starting, do not use types of starting aids such as ether. Such use could result in an explosion and injury.
When starting the engine with ether, follow these starting procedure instructions carefully. Use ether sparingly and spray it ONLY WHILE CRANKING THE ENGINE. Excessive ether use can cause piston and ring damage. Ether should be used only for cold weather starting.
Table 1
Medium and Heavy-Duty On-Highway Engines (1)
Cold Weather Recommendations    
Starting Aids    
Expected Coldest Temperature     Ether Injection (2)
OR
Air Inlet Heater     Cylinder Block Coolant Heater     Larger Battery
Larger Alternator    
Above
−7 °C (19 °F)     Available     Available     Available    
−7 °C (19 °F) to
−18 °C (0 °F)     Available     Available     Available    
−18 °C (0 °F) to
−28 °C (−18 °F)     Recommended     Required     Recommended    
−28 °C (−18 °F) to
−40 °C (−40 °F)     Recommended     Required     Required    
Less than
−40 °C (−40 °F)     Required     Required     Required    
( 1 ) Options may not be available for all models.
( 2 ) If the engine is equipped with an air inlet heater (AIH) for cold weather starting, do not use types of starting aids such as ether. Such use could result in an explosion and injury.
Table 2
Medium and Heavy-Duty On-Highway Engines (1)
Cold Weather Recommendations    
Improvements for Engine Warm-Up
Improvements for Idle Temperature    
Expected Coldest Temperature     Hand Throttles     Winter Fronts
Shutters     Air Cleaners
Located Under the Hood     On/Off
Fan Drives     BrakeSavers
Exhaust Restrictors    
Above
−7 °C (19 °F)     Available     Available     Available     Available     Available    
−7 °C (19 °F) to
−18 °C (0 °F)     Available     Recommended     Recommended     Recommended     Available    
−18 °C (0 °F) to
−28 °C (−18 °F)     Recommended     Required     Recommended     Required     Recommended    
−28 °C (−18 °F) to
−40 °C (−40 °F)     Required     Required     Recommended     Required     Recommended    
Less than
−40 °C (−40 °F)     Required     Required     Recommended     Required     Required    
( 1 ) Options may not be available for all models.
Have questions with 101602-1271?
Group cross 101602-1271 ZEXEL
Mitsubishi
Mitsubishi
Mitsubishi
Mitsubishi
Mitsubishi
101602-1271
9 400 613 114
ME047566
INJECTION-PUMP ASSEMBLY
6D14T
6D14T