101602-0301 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1016020301 5156009243


 

Information injection-pump assembly

ZEXEL 101602-0301 1016020301
ISUZU 5156009243 5156009243
101602-0301 INJECTION-PUMP ASSEMBLY
Rating:
24
Buy INJECTION-PUMP ASSEMBLY 101602-0301 zexel genuine, new aftermarket engine parts with delivery

Service parts 101602-0301 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-8710
3. GOVERNOR 105410-3770
4. SUPPLY PUMP 105220-4561
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156635-5721
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4602
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 18.1(185)
13. NOZZLE-HOLDER 105031-3952
14. NOZZLE 105015-4190
15. NOZZLE SET

Include in #1:

101602-0301 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
101602-0301 
 
5156009243  ISUZU
INJECTION-PUMP ASSEMBLY
6BD1 * K




Information:

Responsibilities of the Oil Company
Performance - The performance of the oil is the responsibility of the oil company. The oil must maintain stable oil control and the oil must control deposits in the combustion chamber and in the crankcase. Engine service life must be maintained at the predicted stage for the particular engine application.Supply - The supply of the oil is the responsibility of the oil company. If special storage and/or shipping is required, the oil company should cover the cost of those items.Oil and fuel analysis - During the evaluation, the oil company should pay for the cost of the oil and fuel analyses. The oil samples should be analyzed by the local Cat dealer in the S O S Services program. The data that is obtained from the oil analyses must be plotted in order to establish trends. The fuel should be analyzed periodically by an independent laboratory. Results of the oil and fuel analyses must be sent to the engine owner. The owner should review the data. Also, the owner should be allowed to keep records of the data.Hardware - If the oil is evaluated in a used engine, two new sets of these components must be installed before the Field Performance Evaluation: pistons, piston rings and cylinder liners. The cost should be covered by the oil company. These new components will be examined as part of the final inspection.Final Inspection - The cost of the final inspection should be paid by the oil company. The costs of additional downtime can also be part of the cost of inspection. If the final inspection reveals severe deposits and/or damage to the hardware, the oil company must make the repairs that are necessary for restoring the engine to an acceptable condition.End of the Evaluation - After completion of the Field Performance Evaluation, the oil company should work with the engine owner in order to restore the engine to normal operation. If the Field Performance Evaluation is not completed, the same conditions should be applicable. The oil company should bear the cost of the restoration. The cost includes the removal of storage tanks, special piping, flow meters, and instrumentation.Final Report - the oil company must prepare a final report that documents the following items:
Initial oil consumption and final oil consumption
The data on oil consumption must be recorded on a minimum schedule of every week. A chart of the data must be included in the final report.
Results of oil analyses
Oil changes
Replacement of oil filters
Results of fuel analyses
Fuel consumption or power output
Average engine speed (rpm)
The typical duty cycle
Close up photographs of the following components from two cylinders must also be included: pistons, piston rings before removal and after removal, piston rings after removal, cylinder liners, crankcase, top deck of the cylinder head, bottom deck of the cylinder head, inlet valves and exhaust valves.The final report should be confidential. The final report should be made available to the engine owner.Responsibilities of the Engine Owner
Engine for the Evaluation - The owner must

Have questions with 101602-0301?





Group cross 101602-0301 ZEXEL

Isuzu 

 
5156009240 
INJECTION-PUMP ASSEMBLY
6BD1
101602-0301  
 
5156009243 
INJECTION-PUMP ASSEMBLY
6BD1
 
5156009024 
INJECTION-PUMP ASSEMBLY
6BD1
 
5156006843 

6BD1
9 400 610 325 
5156008965 
INJECTION-PUMP ASSEMBLY
6BB1
 
5156009920 
INJECTION-PUMP ASSEMBLY
6BB1
 
5156007863 
INJECTION-PUMP ASSEMBLY
6BB1
 
5156010484 
INJECTION-PUMP ASSEMBLY
6BD1
 
5156010493 
INJECTION-PUMP ASSEMBLY
6BD1
9 400 619 652 
5156010494 
INJECTION-PUMP ASSEMBLY
6BD1
 
5156010504 
INJECTION-PUMP ASSEMBLY
6BD1
 
5156010505 
INJECTION-PUMP ASSEMBLY
6BD1
 
5156010520 
INJECTION-PUMP ASSEMBLY
6BD1
Back to top