Information injection-pump assembly
BOSCH
9 400 614 667
9400614667
ZEXEL
101601-8573
1016018573
ISUZU
1156015067
1156015067
Rating:
Service parts 101601-8573 INJECTION-PUMP ASSEMBLY:
1.
_
6.
COUPLING PLATE
7.
COUPLING PLATE
8.
_
9.
_
11.
Nozzle and Holder
1-15300-104-2
12.
Open Pre:MPa(Kqf/cm2)
18.1{185}
15.
NOZZLE SET
Cross reference number
Zexel num
Bosch num
Firm num
Name
101601-8573
9 400 614 667
1156015067 ISUZU
INJECTION-PUMP ASSEMBLY
6BD1 * K 14BE INJECTION PUMP ASSY PE6A PE
6BD1 * K 14BE INJECTION PUMP ASSY PE6A PE
Information:
Start By:a. remove oil pump1. Check the main bearing caps for identification for their location and direction in the block. The caps must be installed in the same location and direction from which they were removed. 2. Remove No. 2 through No. 6 bearing caps (1). Remove thrust plates from the No. 4 main bearing.
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either the crankshaft or cylinder block or both.
3. Remove the upper halves of the main bearings by putting tool (A) in oil hole (2) in the crankshaft. Turn the crankshaft in the direction which will push the
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either the crankshaft or cylinder block or both.
3. Remove the upper halves of the main bearings by putting tool (A) in oil hole (2) in the crankshaft. Turn the crankshaft in the direction which will push the
Have questions with 101601-8573?
Group cross 101601-8573 ZEXEL
Isuzu
101601-8573
9 400 614 667
1156015067
INJECTION-PUMP ASSEMBLY
6BD1
6BD1