101601-8411 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1016018411 1156015901

Information injection-pump assembly

ZEXEL 101601-8411 1016018411

ISUZU 1156015901 1156015901

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101601-8411 zexel genuine, new aftermarket engine parts with delivery

Service parts 101601-8411 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-0850

3. GOVERNOR 105931-1751

4. SUPPLY PUMP 105220-4781

5. AUTOM. ADVANCE MECHANIS 105612-3180

6. COUPLING PLATE 105661-0681

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-6051

11. Nozzle and Holder 1-15300-134-0

12. Open Pre:MPa(Kqf/cm2) 18.1(185)

13. NOZZLE-HOLDER 105030-3201

14. NOZZLE 105015-5720

15. NOZZLE SET

Include in #1:

101601-8411 as INJECTION-PUMP ASSEMBLY

106681-4350 as _

Cross reference number

Zexel num

Bosch num

Firm num

Name

101601-8411

1156015901 ISUZU

INJECTION-PUMP ASSEMBLY
6BD1 * K

Information:

1. Disconnect fuel line (1).2. Remove two bolts (2) and remove the fuel transfer pump. The following steps are for the installation of the fuel transfer pump.3. Be sure the o-ring seal is in place on the fuel transfer pump. Install the fuel transfer pump and install bolts (2).4. Connect fuel line (1). Connect fuel supply line.Disassemble And Assemble Fuel Transfer Pump
Start By:a. remove fuel transfer pump 1. Remove two bolts (1) and remove cover (2). 2. Remove gear (3).
Before removing input shaft and gear (5) from pump housing, be sure no burrs exist on the input shaft. If the shaft has burrs it could scratch the pump housing and damage it.
3. Install tooling (A) and remove drive gear (4), then remove gear and shaft (5) from pump housing.4. Inspect and replace if necessary seal group (6). Inspect by-pass valve (7). The following steps are for the assembly of the fuel transfer pump.4. Install shaft and gear (5) in pump housing, then press gear (4) onto shaft until gear (4) is flush with the end of the shaft.5. Install gear (3).6. Be sure the cover seal is in place, position cover (2) and install bolts (1).End By:a. install fuel transfer pump