101601-2701 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1016012701 220801131b


 

Information injection-pump assembly

ZEXEL 101601-2701 1016012701
HINO 220801131B 220801131b
101601-2701 INJECTION-PUMP ASSEMBLY
Rating:
84
Buy INJECTION-PUMP ASSEMBLY 101601-2701 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
101601-2701 
 
220801131B  HINO
INJECTION-PUMP ASSEMBLY
EH700 * K




Information:

start by:a) remove valve covers and bases 1. Use tool (A) to loosen the nuts on the fuel injection valves and use tool (B) to loosen the nuts on the adapter assemblies in the cylinder head. Remove inner fuel lines (1).
If necessary, use tooling (D) to turn the engine so the valves do not make contact with the pistons when the valves are opened with tool (C) to remove the push rods.
2. Put compression on the valve springs with tool (C) and remove push rods (2).3. Push the push rod end of the rocker arms down. 4. Remove the intake valve lifter with tooling (E) as follows: a) Install the 5P2685 Nut and the 5P6601 Collet on the 5P2408 Outer Handle Assembly.b) Install the 5P6599 Inner Handle Assembly in the 5P2408 Outer Handle Assembly.c) Install tooling (E) in the intake valve lifter. Hold the 5P2408 Outer Handle Assembly and tighten the 5P6599 Inner Handle Assembly until the 5P6601 Collet is tight against the inside of intake valve lifter. d) Remove intake valve lifters (3) from the cylinder block with tooling (E). 4. Remove the exhaust valve lifters with tooling (E) as follows: a) Install 5P2685 Nut (5) and 5P6601 Collet (6) on 5P2408 Outer Handle Assembly (4). The opening in the cylinder head for the intake valve lifter is larger than the opening in the exhaust valve lifter side. The tooling and each valve lifter must be installed and removed from the intake valve lifter side. b) Install the outer handle assembly in the intake valve lifter side of the cylinder head. Slide the flat area of 5P2408 Outer Handle Assembly (4) through the head casting and install the 5P6601 Collet in the exhaust valve lifter. c) Install 5P6599 Inner Handle Assembly (7) in 5P2408 Outer Handle Assembly (4). Hold the 5P2408 Handle Assembly and tighten the 5P6599 Handle Assembly until the 5P6601 Collet is tight against the inside of exhaust valve lifter.d) Pull the exhaust valve lifter up until the spring on the exhaust valve lifter is free from the cylinder block.e) Remove the 5P6599 Inner Handle Assembly. Slide the 5P2408 Outer Handle Assembly through the head casting and remove it from the intake valve lifter side of the cylinder head. f) Use a magnet and remove exhaust valve lifter (8) from the intake valve lifter side of the cylinder head.5. Remove the guide springs from the lifters.Install Valve Lifters
Steps 1 and 2 must be done to install intake or exhaust valve lifters.
When a valve lifter is removed, a new guide spring must be installed.
1. Install a new guide spring (1) on the valve lifters. 2. Put the intake or exhaust valve lifter in position in 5P2395 Holder (5) of tooling (A). Install 5P2685 Nut (4) and 5P2400 Compressor (3) on 5P2408 Outer Handle Assembly (2). Install the 5P2400 Compressor on the lifter over the guide spring. The opening in the cylinder head for the intake valve lifter is larger than the opening in the exhaust valve

Have questions with 101601-2701?





Group cross 101601-2701 ZEXEL

Hino 

 
220801130A 
INJECTION-PUMP ASSEMBLY
EH700
101601-2701  
 
220801131B 
INJECTION-PUMP ASSEMBLY
EH700
 
220201660A 
INJECTION-PUMP ASSEMBLY
EL100
 
220201661A 
INJECTION-PUMP ASSEMBLY
EL100
 
220201664A 
INJECTION-PUMP ASSEMBLY
EL100
 
220201665A 
INJECTION-PUMP ASSEMBLY
EL100
 
220201666A 
INJECTION-PUMP ASSEMBLY
EL100
 
220003880A 
INJECTION-PUMP ASSEMBLY
W06D
 
220201880A 
INJECTION-PUMP ASSEMBLY
EL100
 
220201881A 
INJECTION-PUMP ASSEMBLY
EL100
 
220004121A 
INJECTION-PUMP ASSEMBLY
H07C
 
220004121B 
INJECTION-PUMP ASSEMBLY
H07C
9 400 614 573 
220004122B 
INJECTION-PUMP ASSEMBLY
H07C
 
220004131B 
INJECTION-PUMP ASSEMBLY
H07C
 
220004132A 
INJECTION-PUMP ASSEMBLY
H07C
9 400 614 574 
220004133B 
INJECTION-PUMP ASSEMBLY
H07C
 
220201890A 
INJECTION-PUMP ASSEMBLY
EL100
 
220201891A 
INJECTION-PUMP ASSEMBLY
EL100
 
220003882A 
INJECTION-PUMP ASSEMBLY
W06D
 
220003883A 
INJECTION-PUMP ASSEMBLY
W06D
 
220003883B 
INJECTION-PUMP ASSEMBLY
W06D
 
220004230A 
INJECTION-PUMP ASSEMBLY
ED100
Back to top