101492-4060 ZEXEL 9 400 611 887 BOSCH INJECTION-PUMP ASSEMBLY 9400611887 1014924060 8972485530


 

Information injection-pump assembly

BOSCH 9 400 611 887 9400611887
ZEXEL 101492-4060 1014924060
ISUZU 8972485530 8972485530
101492-4060 INJECTION-PUMP ASSEMBLY
Rating:
28
Buy INJECTION-PUMP ASSEMBLY 101492-4060 zexel genuine, new aftermarket engine parts with delivery

Service parts 101492-4060 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101049-5130
3. GOVERNOR 105400-9310
4. SUPPLY PUMP 105220-4742
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156643-4220
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-6721
11. Nozzle and Holder 8-97211-280-0
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105048-3230
14. NOZZLE 105017-2690
15. NOZZLE SET

Include in #1:

101492-4060 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 887 9400611887
ZEXEL 101492-4060 1014924060
ISUZU 8972485530 8972485530


Zexel num
Bosch num
Firm num
Name
101492-4060 
101402-7900 
9 400 611 887 
8972485530  ISUZU
INJECTION-PUMP ASSEMBLY
4JG1 * K 14BC PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-0820
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-3-4-2
Pre-stroke mm   2.6 2.55 2.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.4
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   58 57 59
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   6.5+-0.5
Pump speed r/min   585 585 585
Average injection quantity mm3/st.   11.5 9.5 13.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 101492-4060
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Set idle sub-spring (4)Main spring setting (5)Rack difference between N = N1 and N = N2
----------
K=10 N1=1150r/min N2=900r/min
----------

Speed control lever angle

Test data 101492-4060
F:Full speed I:Idle S:Stop
----------

----------
a=6deg+-5deg b=19deg+-5deg c=31deg+-3deg

Stop lever angle

Test data 101492-4060
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=0deg+-5deg b=53deg+-5deg

Timing setting

Test data 101492-4060
(1)Pump vertical direction (2)Position of gear mark 'W' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=10deg
----------
a=(210deg)




Information:


AFFECTED PRODUCT
Model Identification Number
CB13 PWP00100-00112
CB15 M9400100-00109
CB16 HP500100
CB64B C5600100-00119, 121, 123, 125, 127, 129-132, 134-139, 141-142, 145-146, 150, 153-156, 158, 162-163, 165, 167, 173-174, 178-179, 182-191, 194, 196-198, 202-204, 206-207, 209-213, 216-221, 223, 225-232, 235-243, 245-246, 248, 250-253, 256-259, 261-267, 269-271, 273-274, 276-278, 280-282, 284-285, 287-288, 290-291, 294-296, 300-302, 304-306, 308, 310-311, 313-318, 320, 322-328, 335-336, 339-341, 344-347, 349-354, 358-359, 361-366, 368-369, 371-374, 377, 379-380, 382-385, 387-389, 391-393, 395-397, 400, 402-405, 407, 409, 411, 415, 417-418, 421-424, 427-428, 430, 432, 434-436, 439
CB66B B6600100, 102-103, 105, 109-113, 115, 117-118, 121-123, 125, 128, 130-131, 133-134, 136, 139-140, 145, 149, 152-154, 156, 159-169, 172-178, 181-184, 187-188, 190-191, 194-202, 205, 209-210, 213-215, 217-228, 233-234, 237, 241-242, 245, 247-255, 257-260, 264-267, 269-270, 272-274, 276-277, 280-281, 283, 285-288, 291, 293-296, 299-304, 307, 310-312, 314
CB68B C6800100, 103-104, 106-107, 111-113, 115-116, 124-125, 127-128, 130, 132-140, 142-145, 147, 149-151
PARTS NEEDED
Qty
Part Number Description
1 4716029 MTG GP-INJECTOR (After Failure Only)
1 5548956 DEF SOFTWARE
1 ENGSOFTWARE ENGINE SOFTWARE
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 23% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
New DEF system Software is available that reduces the risk of an internal DEF injector leak by improved temperature management. Please update the DEF system software at the next opportunity.
Ensure that all adjustments and repairs that are carried out to the Diesel Emission Fluid (DEF) system are performed by authorized personnel that have the correct training. Before beginning ANY work on the DEF system, refer to Operation and Maintenance Manual, "General Hazard" for safety information.
Before Failure:
Check that the engine software is the latest version before updating the DEF pump software.
If the engine software is not the latest version, update the Engine Software first.
If needed, update the engine software with the latest available in SIS Web.
Flash the DEF Pump ECM with the software listed in the Parts Needed or latest available in SIS Web.
For flash programming of the ECM software, refer to Troubleshooting "ECM Software - Install".
After Failure:
Ensure the appropriate steps have been followed when diagnosing a DEF injector failure ? Refer to UENR0662.
If it is determined that replacement of DEF injector is required, refer to the Disassembly and Assembly Manual - Diesel Exhaust Fluid Injector - Remove and Install.
After the DEF injector has been replaced, perform the DEF system software update as detailed in the "Before Failure" section above.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-5000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 0.5-hour job
An additional 3 hours are allowed for After failure.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Have questions with 101492-4060?





Group cross 101492-4060 ZEXEL

Isuzu 

9 400 614 463 
8972231690 
INJECTION-PUMP ASSEMBLY
4JB1
9 400 614 464 
8972251300 
INJECTION-PUMP ASSEMBLY
4JB1
9 400 611 691 
8972271420 
INJECTION-PUMP ASSEMBLY
4JG1
 
8972306200 
INJECTION-PUMP ASSEMBLY
4JG1
9 400 611 826 
8972306201 
INJECTION-PUMP ASSEMBLY
4JG1
9 400 614 465 
8972306202 
INJECTION-PUMP ASSEMBLY
4JG1
 
8972271941 
INJECTION-PUMP ASSEMBLY
4JG1
9 400 611 744 
8972271942 
INJECTION-PUMP ASSEMBLY
4JG1
9 400 611 745 
8972493160 
INJECTION-PUMP ASSEMBLY
4JB1
101492-4060  

101402-7900 
9 400 611 887 
8972485530 
INJECTION-PUMP ASSEMBLY
4JG1
9 400 612 031 
8972485500 
INJECTION-PUMP ASSEMBLY
4JG1
9 400 614 466 
8972597340 
INJECTION-PUMP ASSEMBLY
4JB1
Back to top