101492-1090 ZEXEL 9 400 614 425 BOSCH INJECTION-PUMP ASSEMBLY 9400614425 1014921090 me017996


 

Information injection-pump assembly

BOSCH 9 400 614 425 9400614425
ZEXEL 101492-1090 1014921090
MITSUBISHI ME017996 me017996
101492-1090 INJECTION-PUMP ASSEMBLY
Rating:
23
Buy INJECTION-PUMP ASSEMBLY 101492-1090 zexel genuine, new aftermarket engine parts with delivery

Service parts 101492-1090 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101049-9031
3. GOVERNOR 105400-3720
4. SUPPLY PUMP 105220-5180
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156636-5320
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4050
11. Nozzle and Holder ME019368
12. Open Pre:MPa(Kqf/cm2) 17.7(180)
13. NOZZLE-HOLDER 105048-3010
14. NOZZLE 105017-0040
15. NOZZLE SET

Include in #1:

101492-1090 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 614 425 9400614425
ZEXEL 101492-1090 1014921090
MITSUBISHI ME017996 me017996


Zexel num
Bosch num
Firm num
Name
101492-1090 
9 400 614 425 
ME017996  MITSUBISHI
INJECTION-PUMP ASSEMBLY
4D31PT * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.7
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   43.2 42.2 44.2
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   8.2+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   7.5 6.2 8.8
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   C
Rack position   11.6+-0. 5
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   60.5 60.5 65.5
Fixing the lever   *
Rack limit   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   7.6+-0.5
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   8 7 9
Max. variation between cylinders %   0 -15 15
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101492-1090
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT (3)Setting at shipping (4)Idle sub spring setting: L1.
----------
K=10 L1=6.7+-0.1mm
----------

Speed control lever angle

Test data 101492-1090
F:Full speed I:Idle (1)Set the pump speed at aa (2)At shipping (3)Set the pump speed at bb. (4)Stopper bolt setting
----------
aa=750r/min bb=900r/min
----------
a=22deg+-5deg b=1deg+-5deg c=(2deg) d=6deg+-5deg

Stop lever angle

Test data 101492-1090
N:Pump normal S:Stop the pump. (1)At shipping
----------

----------
a=38deg+-5deg b=53deg+-5deg

Timing setting

Test data 101492-1090
(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(130deg)




Have questions with 101492-1090?





Group cross 101492-1090 ZEXEL

Mitsubishi 

 
ME019330 
INJECTION-PUMP ASSEMBLY
4D31T
 
 
INJECTION-PUMP ASSEMBLY
4D31T
 
ME019335 
INJECTION-PUMP ASSEMBLY
4D31T
 
 
INJECTION-PUMP ASSEMBLY
4D31T
 
ME019337 
INJECTION-PUMP ASSEMBLY
4D31T
 
 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 421 
ME017757 
INJECTION-PUMP ASSEMBLY
4D31T
 
 
INJECTION-PUMP ASSEMBLY
4D31T
 
ME017758 
INJECTION-PUMP ASSEMBLY
4D31T
 
 
INJECTION-PUMP ASSEMBLY
4D31PT
9 400 614 422 
ME017813 
INJECTION-PUMP ASSEMBLY
4D31PT
 
 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 423 
ME017863 
INJECTION-PUMP ASSEMBLY
4D31T
9 400 614 424 
ME018037 
INJECTION-PUMP ASSEMBLY
4D31CT
 
ME018041 
INJECTION-PUMP ASSEMBLY
4D31T
101492-1090  
9 400 614 425 
ME017996 
INJECTION-PUMP ASSEMBLY
4D31PT
Back to top