101491-9726 ZEXEL 9 400 611 886 BOSCH INJECTION-PUMP ASSEMBLY 9400611886 1014919726 sltp13800f


 

Information injection-pump assembly

BOSCH 9 400 611 886 9400611886
ZEXEL 101491-9726 1014919726
MAZDA SLTP13800F sltp13800f
101491-9726 INJECTION-PUMP ASSEMBLY
Rating:
40
Buy INJECTION-PUMP ASSEMBLY 101491-9726 zexel genuine, new aftermarket engine parts with delivery

Service parts 101491-9726 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101049-5061
3. GOVERNOR 105921-4171
4. SUPPLY PUMP 105220-7240
5. AUTOM. ADVANCE MECHANIS 105670-0360
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4252
11. Nozzle and Holder SL50 13 H50A
12. Open Pre:MPa(Kqf/cm2) 16.7{170}
13. NOZZLE-HOLDER 105048-3121
14. NOZZLE 105017-0211
15. NOZZLE SET

Include in #1:

101491-9726 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
101491-9726 
9 400 611 886 
SLTP13800F  MAZDA
INJECTION-PUMP ASSEMBLY
SL-T K 14BC INJECTION PUMP ASSY PE4A,5A, PE




Information:

Oils
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.Keep all exhaust manifold and turbocharger shields in place to protect hot exhaust from oil spray in the event of a line, tube or seal failure.Batteries
Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes.Wash hands after touching batteries and connectors. Use of gloves is recommended.Batteries give off flammable fumes which can explode. Ensure there is proper ventilation for batteries which are located in an enclosure.Always thaw a frozen battery before jump starting. Frozen batteries can explode.Do not smoke when observing battery electrolyte levels.Always wear protective glasses when working with batteries.Never disconnect any charging unit circuit or battery circuit cable from the battery when charging unit is operating. A spark can cause the flammable vapor mixture of hydrogen and oxygen to explode.Fire or Explosion Prevention
Fire may result from lubricating oil or fuel sprayed on hot surfaces causing personal injury and property damage. Inspect all lines and tubes for wear or deterioration. They must be routed, supported or clamped securely. Tighten all connections to the recommended torque. Leaks can cause fires.Determine whether the engine will be operated in an environment in which combustible gases could be drawn through the air inlet system. These gases could cause the engine to overspeed, which in turn could seriously damage the engine and result in bodily injury or property damage.If your application involves the presence of combustible gases, consult your Caterpillar dealer to obtain additional information concerning protection devices (i.e. air inlet shutoff) suitable for the application involved.All fuels, most lubricants and some coolant mixtures are flammable.Diesel fuel is flammable. Gasoline is flammable. The mixture of diesel and gasoline fumes is extremely explosive.Do not smoke while refueling or in a refueling area.Do not smoke in areas where batteries are charged, or where flammable materials are stored.Batteries give off flammable fumes which can explode.Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Remove all flammable materials such as fuel, oil and other debris before they accumulate on the engine.Do not expose the engine to flames, burning brush, etc., if at all possible.Shields (if equipped), which protect hot exhaust components from oil or fuel spray in the event of a line, tube or seal failure, must be installed correctly.Provide adequate and proper waste oil disposal. Oil and fuel filters must be properly installed and housing covers tightened to proper torque when being changed.Batteries must be kept clean, covers kept on all cells, recommended cables and connections used and battery box covers kept in place when operating.When starting from an external source, always connect the positive (+) jumper cable to the POSITIVE (+) terminal of the

Have questions with 101491-9726?





Group cross 101491-9726 ZEXEL

Mazda 

9 400 619 548 
SLTP13800 
INJECTION-PUMP ASSEMBLY
SL-T
9 400 619 534 
 
INJECTION-PUMP ASSEMBLY

Mazda 

9 400 619 535 
SLTP13800B 
INJECTION-PUMP ASSEMBLY
SL-T
9 400 610 533 
SLTP13800C 
INJECTION-PUMP ASSEMBLY
SL-T
F 01G 09U 01V 
SLTP13800D 
INJECTION-PUMP ASSEMBLY
SL-T
9 400 610 534 
SLTP13800E 
INJECTION-PUMP ASSEMBLY
SL-T
101491-9726  
9 400 611 886 
SLTP13800F 
INJECTION-PUMP ASSEMBLY
SL-T
Back to top