101452-3082 ZEXEL 9 400 611 656 BOSCH INJECTION-PUMP ASSEMBLY 9400611656 1014523082 6204721331


 

Information injection-pump assembly

BOSCH 9 400 611 656 9400611656
ZEXEL 101452-3082 1014523082
KOMATSU 6204721331 6204721331
101452-3082 INJECTION-PUMP ASSEMBLY
Rating:
18
Buy INJECTION-PUMP ASSEMBLY 101452-3082 zexel genuine, new aftermarket engine parts with delivery

Service parts 101452-3082 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101045-8090
3. GOVERNOR 105400-6960
4. SUPPLY PUMP 105220-5620
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105141-2520
11. Nozzle and Holder 6202-12-3100
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105071-1450
14. NOZZLE 105000-1770
15. NOZZLE SET

Include in #1:

101452-3082 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 656 9400611656
ZEXEL 101452-3082 1014523082
KOMATSU 6204721331 6204721331


Zexel num
Bosch num
Firm num
Name
101452-3082 
9 400 611 656 
6204721331  KOMATSU
INJECTION-PUMP ASSEMBLY
4D95L K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-4-3
Pre-stroke mm   1.5 1.45 1.55
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cal 1-3
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   13.3
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   43.9 42.9 44.9
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   10+-0.5
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   11 10 12
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 101452-3082
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK CAP: R1 (3)Rack difference between N = N1 and N = N2 (4)Rack difference between N = N3 and N = N4
----------
K=5 R1=(17.5)mm N1=1300r/min N2=750r/min N3=1300r/min N4=300r/min
----------

Speed control lever angle

Test data 101452-3082
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=4deg+-5deg b=26deg+-5deg

Stop lever angle

Test data 101452-3082
N:Pump normal S:Stop the pump.
----------

----------
a=1deg+-5deg b=53deg+-5deg

Timing setting

Test data 101452-3082
(1)Pump vertical direction (2)Position of key groove at No 1 cylinder's beginning of injection (3)Stamp aligning marks on the pump housing flange. (4)- (5)-
----------

----------
a=46deg18min+-3deg b=13deg42min+-30min




Information:

Introduction
There have been instances of issues with DEF pumps. After analysis, the cause of the issues has been found as contamination with hydrocarbons.Note: Diesel fuel is an example of a hydrocarbon.The DEF filter is equipped with a compensator located in the center of the filter assembly. If the compensator comes into contact with hydrocarbons, the compensator will swell and is designed to block the filter assembly and protect the DEF pump.Solution
The following procedure is designed to diagnose if the DEF pump has been contaminated with hydrocarbons.
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Ensure that the engine is stopped before any servicing or repair is performed. The Diesel Exhaust Fluid (DEF) system must have completed a proper shutdown. Service on the DEF pump prior to completion of a proper shutdown can result in DEF spray and spillage.
Do not turn off the battery disconnect switch until the indicator lamp has turned off. If the switch is turned off when the indicator lamp is illuminated, the Diesel Exhaust Fluid (DEF) system may not shut down properly. If the DEF system does not shut down properly, DEF could freeze and damage the pump and lines.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Cat Dealer Service Tool Catalog" or refer to Special Publication, PECJ0003, "Cat Shop Supplies and Tools Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Clean water should be used to wash spilled DEF off machine components and surfaces.Note: Wear gloves when handling the DEF filter.
Illustration 1 g06278274
(1) Protective cover
Remove protective cover (1).
Illustration 2 g06278289
(2) DEF filter cap
Use a suitable tool to remove DEF filter cap (2).
Illustration 3 g06278325
(3) Compensator
With the filter installed in the DEF pump, carefully remove compensator (3).
Illustration 4 g06614423
(A) 85 mm (3.3 inch)
(B) 17 mm (0.7 inch)
Check the measurements of compensator (3). Check if the measurements are greater than specified in Illustration 4. This condition indicates that the DEF pump is contaminated with hydrocarbons.
If the measurements indicate contamination, replace the DEF pump filter. Refer to Operation and Maintenance Manual, Diesel Exhaust Fluid Filter - Replace.Flush the DEF tank. Refer to Systems Operation, Testing and Adjusting, Diesel Exhaust Fluid Tank - Flush.
If the measurements are within the specification, continue to follow the appropriate troubleshooting procedure to determine if the DEF pump has a fault.

Have questions with 101452-3082?





Group cross 101452-3082 ZEXEL

Komatsu 

9 400 614 175 
6204721310 
INJECTION-PUMP ASSEMBLY
4D95L
9 400 614 176 
6204721330 
INJECTION-PUMP ASSEMBLY
4D95L
9 400 614 177 
6202721610 
INJECTION-PUMP ASSEMBLY
4D95S
 
6204721410 
INJECTION-PUMP ASSEMBLY
4D95L
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 614 178 
6204721411 
INJECTION-PUMP ASSEMBLY
4D95L
9 400 619 647 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 610 193 
6204721420 
INJECTION-PUMP ASSEMBLY
4D95L
 
 
INJECTION-PUMP ASSEMBLY
4D95S
9 400 614 179 
6202721210 
INJECTION-PUMP ASSEMBLY
4D95S
F 019 Z10 576 
6202721620 
INJECTION-PUMP ASSEMBLY
4D95S
 
 
INJECTION-PUMP ASSEMBLY
4D95S
9 400 614 180 
6202721230 
INJECTION-PUMP ASSEMBLY
4D95S
F 019 Z10 577 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

101452-3082  
9 400 611 656 
6204721331 
INJECTION-PUMP ASSEMBLY
4D95L
9 400 614 181 
 
INJECTION-PUMP ASSEMBLY
4D95L
 
6204721430 
INJECTION-PUMP ASSEMBLY
4D95L
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 610 194 
6204721431 
INJECTION-PUMP ASSEMBLY
4D95L
Back to top