101405-9080 ZEXEL F 019 Z10 949 BOSCH INJECTION-PUMP ASSEMBLY f019z10949 1014059080


 

Information injection-pump assembly

BOSCH F 019 Z10 949 f019z10949
ZEXEL 101405-9080 1014059080
101405-9080 INJECTION-PUMP ASSEMBLY
Rating:
76
Buy INJECTION-PUMP ASSEMBLY 101405-9080 zexel genuine, new aftermarket engine parts with delivery

Include in #1:

Cross reference number

Zexel num
Bosch num
Firm num
Name
101405-9080 
F 019 Z10 949 
  DPICO
INJECTION-PUMP ASSEMBLY
DB33TI Q




Information:

Engine Lifting
When it is necessary to remove a component on an angle, remember that the capacity of an eyebolt is less as the angle between the supporting members and the object becomes less than 90°. Eyebolts and brackets should never be bent and should only be loaded in tension.
Use a hoist to remove heavy components. Lift the engine by using an adjustable lifting beam. All supporting members (chains and cables) should be parallel to each other, and as near perpendicular as possible to the top of the object being lifted.Some removals require the use of lifting fixtures to obtain proper balance and to provide safe handling. To remove the engine, use the two lifting eyes on the engine.Lifting eyes are designed for the arrangement as sold. Alterations to lifting eyes and/or arrangement weight make the lifting devices obsolete.If you make alterations, you are responsible for providing adequate lifting devices.Engine Storage
If the engine is not started for several weeks, the lubricating oil will drain from the cylinder walls and piston rings. Rust can form on the cylinder liner surface, which will increase engine wear and result in shorter engine life.To Prevent Excessive Engine Wear:
Be sure all lubrication recommendations mentioned in the Maintenance Management Schedule intervals chart are completed.If freezing temperatures can be expected, check the cooling system for adequate protection against freezing. A 50/50 solution of Caterpillar permanent-type antifreeze and approved water will give protection below -20°F (-29°C).If it will be impossible to start the engine every week, consult your Caterpillar dealer for instructions to prepare your engine for longer storage periods.If an engine remains out of service and its use is not immediately planned, special precautions should be taken. Refer to "Storage Procedures For Caterpillar Products," Form SEHS9031 for more detailed information on engine storage.

Have questions with 101405-9080?





Group cross 101405-9080 ZEXEL

Yanmar 

9 400 611 882 
12390151001 
INJECTION-PUMP ASSEMBLY
4TNE106T
 
 
INJECTION-PUMP ASSEMBLY

Yanmar 

9 400 612 653 
12390151002 
INJECTION-PUMP ASSEMBLY
4TNE106T
9 400 614 059 
12995351110 
INJECTION-PUMP ASSEMBLY
4TNE98
9 400 611 315 
 
INJECTION-PUMP ASSEMBLY
4TNE94
 
 
INJECTION-PUMP ASSEMBLY

Yanmar 

9 400 612 819 
12991651020 
INJECTION-PUMP ASSEMBLY
4TNE94
9 400 613 287 
12991651021 
INJECTION-PUMP ASSEMBLY
4TNE94

Dpico 

F 019 Z10 948 
 
INJECTION-PUMP ASSEMBLY
DB33TI
9 400 611 821 
 
INJECTION-PUMP ASSEMBLY
4TNE98
9 400 612 820 
 
INJECTION-PUMP ASSEMBLY

Yanmar 

9 400 612 821 
12995351120 
INJECTION-PUMP ASSEMBLY
4TNE98

Mitsubishi-Heav 

9 400 612 299 
3426104020 
INJECTION-PUMP ASSEMBLY
S4K-T
9 400 612 300 
3426104022 
INJECTION-PUMP ASSEMBLY
S4K-T
9 400 611 822 
 
INJECTION-PUMP ASSEMBLY
4TNE106T

Yanmar 

9 400 612 822 
12391251020 
INJECTION-PUMP ASSEMBLY
4TNE106T
9 400 614 060 
12990551010 
INJECTION-PUMP ASSEMBLY
4TNE98T

Dpico 

101405-9080  
F 019 Z10 949 
 
INJECTION-PUMP ASSEMBLY
DB33TI
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi-Heav 

9 400 612 159 
3426104011 
INJECTION-PUMP ASSEMBLY
S4K-T
9 400 612 255 
3426114010 
INJECTION-PUMP ASSEMBLY
S4K-T
Back to top