Information injection-pump assembly
BOSCH
9 400 613 875
9400613875
ZEXEL
101402-3590
1014023590
KOMATSU
6135711400
6135711400
Rating:
Service parts 101402-3590 INJECTION-PUMP ASSEMBLY:
1.
_
5.
AUTOM. ADVANCE MECHANIS
6.
COUPLING PLATE
7.
COUPLING PLATE
8.
_
9.
_
11.
Nozzle and Holder
6137-12-3100
12.
Open Pre:MPa(Kqf/cm2)
22.1{225}
15.
NOZZLE SET
Cross reference number
BOSCH
9 400 613 875
9400613875
ZEXEL
101402-3590
1014023590
KOMATSU
6135711400
6135711400
Zexel num
Bosch num
Firm num
Name
101402-3590
9 400 613 875
6135711400 KOMATSU
INJECTION-PUMP ASSEMBLY
S4D105 * K
S4D105 * K
Calibration Data:
Adjustment conditions
Test oil
1404 Test oil ISO4113 or {SAEJ967d}
1404 Test oil ISO4113 or {SAEJ967d}
Test oil temperature
degC
40
40
45
Nozzle and nozzle holder
105780-8140
Bosch type code
EF8511/9A
Nozzle
105780-0000
Bosch type code
DN12SD12T
Nozzle holder
105780-2080
Bosch type code
EF8511/9
Opening pressure
MPa
17.2
Opening pressure
kgf/cm2
175
Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600
Outer diameter - inner diameter - length (mm) mm 6-2-600
Tester oil delivery pressure
kPa
157
157
157
Tester oil delivery pressure
kgf/cm2
1.6
1.6
1.6
Direction of rotation (viewed from drive side)
Right R
Right R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right R
Right R
Injection order
1-2-4-3
Pre-stroke
mm
3.3
3.25
3.35
Beginning of injection position
Drive side NO.1
Drive side NO.1
Difference between angles 1
Cyl.1-2 deg. 90 89.5 90.5
Cyl.1-2 deg. 90 89.5 90.5
Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5
Cal 1-4 deg. 180 179.5 180.5
Difference between angles 3
Cal 1-3 deg. 270 269.5 270.5
Cal 1-3 deg. 270 269.5 270.5
Injection quantity adjustment
Adjusting point
A
Rack position
11
Pump speed
r/min
1250
1250
1250
Average injection quantity
mm3/st.
72
71
73
Max. variation between cylinders
%
0
-2
2
Basic
*
Fixing the lever
*
Injection quantity adjustment_02
Adjusting point
B
Rack position
7.8+-0.5
Pump speed
r/min
300
300
300
Average injection quantity
mm3/st.
10
9
11
Max. variation between cylinders
%
0
-10
10
Fixing the rack
*
Test data Ex:
Governor adjustment
N:Pump speed
R:Rack position (mm)
(1)Target notch: K
(2)Deliver without the torque control spring operating.
----------
K=10
----------
----------
K=10
----------
Speed control lever angle
F:Full speed
I:Idle
S:Stop
----------
----------
a=0deg+-3deg b=50deg+-5deg c=35deg+-5deg
----------
----------
a=0deg+-3deg b=50deg+-5deg c=35deg+-5deg
Stop lever angle
N:Pump normal
S:Stop the pump.
----------
----------
a=27deg+-5deg b=53deg+-5deg
----------
----------
a=27deg+-5deg b=53deg+-5deg
Timing setting
(1)Pump vertical direction
(2)Position of center of spline's wide tooth at No 1 cylinder's beginning of injection (key position)
(3)-
(4)-
----------
----------
a=(1deg)
----------
----------
a=(1deg)
Information:
Caterpillar: Confidential Yellow
PSP FOR REPLACING UNIT INJECTOR RETURN SPRINGS ON CERTAIN D11N TRACTORS; 776B TRACTORS; 777B, 785, 789 TRUCKS; 3508, 3512, 351 6 ENGINES - PS4591 - MAILED US AND CANADA, CACO, COFA, CFEL, COSA, MARINE TEPS
The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
May 30, 1991 U-110 A-78 AU-66 E-69 O-82 TM-9 PRODUCT SUPPORT PROGRAM FOR REPLACING UNIT INJECTOR RETURN SPRINGS ON CERTAIN D11N TRACTORS; 776B TRACTORS; 777B, 785, AND 789 TRUCKS; AND 3508, 3512, AND 3516 ENGINES. 1290 PS4591 This Program can be administered either before or after a failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS4591" as Part Number, "7755" as Group Number, and "96" as Description Code. Although this Program is to be administered as described above on the Affected Product, parts stock should be reworked as soon as possible. Termination Date
May 31, 1992
Problem
The return springs for Type 2 unit injectors on certain D11N Tractors; 776B Tractors; 777B, 785, and 789 Trucks; and 3508, 3512, and 3516 Engines may fail in some applications. Type 2 injectors are described on
PSP FOR REPLACING UNIT INJECTOR RETURN SPRINGS ON CERTAIN D11N TRACTORS; 776B TRACTORS; 777B, 785, 789 TRUCKS; 3508, 3512, 351 6 ENGINES - PS4591 - MAILED US AND CANADA, CACO, COFA, CFEL, COSA, MARINE TEPS
The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
May 30, 1991 U-110 A-78 AU-66 E-69 O-82 TM-9 PRODUCT SUPPORT PROGRAM FOR REPLACING UNIT INJECTOR RETURN SPRINGS ON CERTAIN D11N TRACTORS; 776B TRACTORS; 777B, 785, AND 789 TRUCKS; AND 3508, 3512, AND 3516 ENGINES. 1290 PS4591 This Program can be administered either before or after a failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS4591" as Part Number, "7755" as Group Number, and "96" as Description Code. Although this Program is to be administered as described above on the Affected Product, parts stock should be reworked as soon as possible. Termination Date
May 31, 1992
Problem
The return springs for Type 2 unit injectors on certain D11N Tractors; 776B Tractors; 777B, 785, and 789 Trucks; and 3508, 3512, and 3516 Engines may fail in some applications. Type 2 injectors are described on
Have questions with 101402-3590?
Group cross 101402-3590 ZEXEL
Komatsu
101402-3590
9 400 613 875
6135711400
INJECTION-PUMP ASSEMBLY
S4D105
S4D105