101401-2241 ZEXEL 9 400 613 657 BOSCH INJECTION-PUMP ASSEMBLY 9400613657 1014012241 220006480a

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH 9 400 613 657 9400613657

ZEXEL 101401-2241 1014012241

HINO 220006480A 220006480a

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101401-2241 zexel genuine, new aftermarket engine parts with delivery

Service parts 101401-2241 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101040-9471

3. GOVERNOR 105921-4100

4. SUPPLY PUMP 105220-5540

5. AUTOM. ADVANCE MECHANIS 105676-0451

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-5060

11. Nozzle and Holder 236001981A

12. Open Pre:MPa(Kqf/cm2) 21.6(220)

13. NOZZLE-HOLDER 105041-5100

14. NOZZLE 105015-7630

15. NOZZLE SET

Include in #1:

101401-2241 as INJECTION-PUMP ASSEMBLY

107691-3122 as _

Cross reference number

BOSCH 9 400 613 657 9400613657

ZEXEL 101401-2241 1014012241

HINO 220006480A 220006480a

Zexel num

Bosch num

Firm num

Name

101401-2241

9 400 613 657

220006480A HINO

INJECTION-PUMP ASSEMBLY
W04C-TD * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 134424-0920

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 4.4 4.37 4.43

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.75 90.25

Difference between angles 2
Cal 1-4 deg. 180 179.75 180.25

Difference between angles 3
Cyl.1-2 deg. 270 269.75 270.25

Injection quantity adjustment

Adjusting point -

Rack position 11.9

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 98.3 96.3 100.3

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 9.2+-0.5

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 21 19.5 22.5

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(11.9)

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 98.3 97.3 99.3

Basic *

Fixing the lever *

Boost pressure kPa 30.7 30.7

Boost pressure mmHg 230 230

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.15

Pump speed r/min 1600 1600 1600

Average injection quantity mm3/st. 99.7 95.7 103.7

Fixing the lever *

Boost pressure kPa 30.7 30.7

Boost pressure mmHg 230 230

Injection quantity adjustment_05

Adjusting point C

Rack position R2(R1-1)

Pump speed r/min 650 650 650

Average injection quantity mm3/st. 73.8 69.8 77.8

Fixing the lever *

Boost pressure kPa 30.7 30.7

Boost pressure mmHg 230 230

Injection quantity adjustment_06

Adjusting point D

Rack position (R1-0.75 )

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 81.9 77.9 85.9

Fixing the lever *

Boost pressure kPa 30.7 30.7

Boost pressure mmHg 230 230

Injection quantity adjustment_07

Adjusting point E

Rack position -

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 55.9 51.9 59.9

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_08

Adjusting point F

Rack position R2-0.9

Pump speed r/min 650 650 650

Average injection quantity mm3/st. 48 44 52

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_09

Adjusting point I

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 110 110 120

Fixing the lever *

Rack limit *

Boost compensator adjustment

Pump speed r/min 650 650 650

Rack position R2-0.9

Boost pressure kPa 6.7 6.7 9.4

Boost pressure mmHg 50 50 70

Boost compensator adjustment_02

Pump speed r/min 650 650 650

Rack position R2(R1-1)

Boost pressure kPa 17.3 17.3 17.3

Boost pressure mmHg 130 130 130

Timer adjustment

Pump speed r/min 1350--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1300

Advance angle deg. 0.3

Timer adjustment_03

Pump speed r/min 1600

Advance angle deg. 3.5 3.2 3.8

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL
----------
T1=D36 BCL=0.9+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=34deg+-5deg b=39deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Use the hole at R = aa
----------
aa=35mm
----------
a=35deg+-5deg b=(40deg)+-5deg

0000001501 ACTUATOR

(a) Screw (B) Nut (c) set bolt (d) control lever 1. Actuator adjustment procedure (1)Position the control lever (d) in the idling position. (2)Set the clearance between the control lever (d) and the set bolt (c) to approx. L1. (3)Loosen the nut (b) and fully tighten the screw (a). (4)Set the pump speed at N1and measure the rack position when negative pressure P1 is applied to the actuator. (5)Loosen screw (a) and fix the nut (b) when the pump speed is N2 and the rack position is R1. (6)Confirm that control lever (d) returns to the idling position at actuator negative pressure 0. (7)Repeat procedures (4) to (6) several times and confirm that the control lever (d) moves smoothly.
----------
L1=2mm R1=10.1~10.4mm P1=66.7kPa(500mmHg) N1=325r/min N2=325r/min
----------

0000001601 TAMPER PROOF

1. Method for setting tamperproof proofing (1)After governor adjustment (torque cam phase adjustment), move the load lever to increase the full rack position to Ra. (2)At pump speed N1, push in the screw (A) until the rack position is Rb. (3)Temporarily caulk using the tip of a screwdriver (4)Confirm that the rack at that time is at Rc. (5)Lock using setscrew (B). (Tightening torque = T) (6)Next, coat (C) with adhesive and then pressfit. (7)Then, readjust the full rack position using the load lever.
----------
N1=1600r/min Ra=(1)mm Rb=R1+0.35mm Rc=R1+0.35mm
----------
T=4.9~6.9N-m(0.5~0.7Kgf-m)

Timing setting

(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)