101401-0542 ZEXEL 9 400 613 562 BOSCH INJECTION-PUMP ASSEMBLY 9400613562 1014010542 8941573523


 

Information injection-pump assembly

BOSCH 9 400 613 562 9400613562
ZEXEL 101401-0542 1014010542
ISUZU 8941573523 8941573523
101401-0542 INJECTION-PUMP ASSEMBLY
Rating:
19
Buy INJECTION-PUMP ASSEMBLY 101401-0542 zexel genuine, new aftermarket engine parts with delivery

Include in #1:

Cross reference number

Zexel num
Bosch num
Firm num
Name
101401-0542 
9 400 613 562 
8941573523  ISUZU
INJECTION-PUMP ASSEMBLY
4BD1T * K 14BC PE4A,5A, PE




Information:

Cooling System
The centrifugal-type water pump mounts on the front cover and is belt driven by the crankshaft pulley. The pump has two outlets. Coolant from the outlet on the right side of the pump flows through a passage in the front cover to the left bank of the engine, and coolant from the outlet on the left flows to the right bank.The coolant circulates through the block to the cylinder head. Coolant flows from the heads through connecting sleeves to the return manifold in the front cover. Orifices in the sleeves control the flow from the heads.Part of the coolant to the left bank is diverted from the block to the oil cooler. External lines direct coolant from the block to the cooler and back to the return manifold in the front cover.An internal passage in the front cover directs the coolant from the return manifold to the water pump inlet. If the thermostats are closed the coolant flows to the pump and is recirculated through the engine. If they are open, coolant flows from the return manifold to the radiator and from there to the pump.The radiator is constructed with a top tank above the core and an expansion tank either above or separate from the top tank. A vent tube connects the radiator top tank and the expansion tank. The expansion tank has a shunt line which connects to the water pump inlet. This shunt system maintains a positive, static head of coolant at the pump inlet to prevent cavitation under all operating conditions. When filling the cooling system, coolant from the expansion tank flows through the shunt line to the water pump inlet and fills the engine block from the bottom. By filling the system from the bottom, air in the system is forced out through the top tank, through the vent tube into the expansion tank.The two thermostats are located at the inlet to the water pump. The inlet-regulated cooling system maintains positive coolant temperature control with decreased engine warm up time.When the thermostats are closed, coolant is circulated through the block and heads and back to the water pump by way of an internal passage in the front cover. When the thermostats are open, the bypass flow is restricted and the engine coolant flows through the radiator and returns through the inlet elbow to the water pump. Without the thermostats installed, the coolant will continually bypass the radiator, and overheating will result.Electrical System
The electrical system is a combination of three separate electric circuits: the charging circuit, the starting circuit and the lighting or load circuit. Each circuit is dependent on some of the same components. The battery (batteries), disconnect switch, circuit breaker, ammeter, cables and wires from the battery are common in each of the circuits.The charging circuit is in operation when the engine is operating. The electricity producing (charging) unit is an alternator. A regulator in the circuit senses the state of charge in the battery and regulates the electrical output to

Have questions with 101401-0542?





Group cross 101401-0542 ZEXEL

Isuzu 

 
8941606660 
INJECTION-PUMP ASSEMBLY
4BD1-T
 
8941606662 
INJECTION-PUMP ASSEMBLY
4BD1-T
 
8941606663 
INJECTION-PUMP ASSEMBLY
4BD1T
9 400 613 558 
8941606664 
INJECTION-PUMP ASSEMBLY
4BD1T
 
8941676771 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 613 559 
8941676772 
INJECTION-PUMP ASSEMBLY
4BD1
 
 
INJECTION-PUMP ASSEMBLY
4BD1-T
 
8941699182 
INJECTION-PUMP ASSEMBLY
4BD1T
9 400 613 560 
8941699183 
INJECTION-PUMP ASSEMBLY
4BD1T
 
 
INJECTION-PUMP ASSEMBLY
4BD1-T
 
8941699192 
INJECTION-PUMP ASSEMBLY
4BD1T
9 400 613 561 
8941699193 
INJECTION-PUMP ASSEMBLY
4BD1T
 
 
INJECTION-PUMP ASSEMBLY
4BD1-T
 
8941573522 
INJECTION-PUMP ASSEMBLY
4BD1T
101401-0542  
9 400 613 562 
8941573523 
INJECTION-PUMP ASSEMBLY
4BD1T
 
 
INJECTION-PUMP ASSEMBLY
4BD1-T
 
8941573532 
INJECTION-PUMP ASSEMBLY
4BD1T
9 400 613 563 
8941573533 
INJECTION-PUMP ASSEMBLY
4BD1T
 
8941573502 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 613 564 
8941573503 
INJECTION-PUMP ASSEMBLY
4BD1
 
8941573512 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 613 565 
8941573513 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 613 566 
8941735890 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 610 049 
8941787190 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 619 519 
8941787191 
INJECTION-PUMP ASSEMBLY
4BD1
9 400 610 389 
8941787192 
INJECTION-PUMP ASSEMBLY
4BD1
Back to top