101401-0220 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014010220 5156011320

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

ZEXEL 101401-0220 1014010220

ISUZU 5156011320 5156011320

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101401-0220 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

ZEXEL 101401-0220 1014010220

ISUZU 5156011320 5156011320

Zexel num

Bosch num

Firm num

Name

101401-0220
101401-0221

5156011320 ISUZU

INJECTION-PUMP ASSEMBLY
4BD1 *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 132424-0620

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 3.6 3.55 3.65

Rack position
Point A R=A

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.75 90.25

Difference between angles 2
Cal 1-4 deg. 180 179.75 180.25

Difference between angles 3
Cyl.1-2 deg. 270 269.75 270.25

Injection quantity adjustment

Adjusting point -

Rack position 13.6

Pump speed r/min 950 950 950

Average injection quantity mm3/st. 56 54.4 57.6

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 10.1+-0. 5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 13.5 12.2 14.8

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position 13.6+-0. 5

Pump speed r/min 950 950 950

Average injection quantity mm3/st. 56 54.4 57.6

Fixing the lever *

Injection quantity adjustment_04

Adjusting point B

Rack position 13.4+-0. 5

Pump speed r/min 1600 1600 1600

Average injection quantity mm3/st. 59.5 58.5 60.5

Basic *

Fixing the lever *

Injection quantity adjustment_05

Adjusting point C

Rack position 13.35+-0 .5

Pump speed r/min 1300 1300 1300

Average injection quantity mm3/st. 56 54.4 57.6

Fixing the lever *

Injection quantity adjustment_06

Adjusting point D

Rack position 13.9+-0. 5

Pump speed r/min 650 650 650

Average injection quantity mm3/st. 47 45 49

Fixing the lever *

Injection quantity adjustment_07

Adjusting point E

Rack position -

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 48

Fixing the lever *

Injection quantity adjustment_08

Adjusting point I

Rack position 15.8+-0. 5

Pump speed r/min 150 150 150

Average injection quantity mm3/st. 75 75 80

Fixing the rack *

Timer adjustment

Pump speed r/min 1050+-50

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1600

Advance angle deg. 3 2.5 3.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT
----------
T1=39
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=38deg+-5deg b=40deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=25deg+-5deg b=40deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=6deg
----------
a=(100deg)

Information:

REM06-45
Reman
December 2006 REMANUFACTURED UNIT INJECTOR ROCKER ARM ASSEMBLIES FOR CERTAIN C15 ENGINE APPLICATIONS Announcement The Caterpillar Remanufactured Products Group announces the expansion of the remanufactured product line to support C15 engine components for On-Highway applications with ACERT? Technology.Coverage
These Reman engine components provide dealers with additional repair options to support C15 engine applications.
The 10R4704 Reman Unit Injector Rocker Arm is for use in C15 On-Highway engines. These applications include truck engines hauling coal and timber (refer to the chart for specific serial number prefixes).
The 10R1136 Reman Unit Injector Rocker Arms is for use in all other C15 engine applications. This includes all C15 engines used in the machine, generator set, marine, industrial, and petroleum applications.
New Part Number Application Serial Number Prefix Reman Part Number
126-0888, 130-0075, 137-4060, 162-9174, 192-8215, 207-5248, 278-1365 On-Highway Truck Engine MBN, MXS, BXS, NXS 10R4704
All other applications All other serial number prefixes 10R1136 Features And Benefits
Cat? Remanufactured Engine Components offer excellent value to customers. Customers who want fast repair turn-around, superior quality and reliability, and lower repair costs will benefit from the use of these Remanufactured Engine Components. Cat Remanufactured Engine Components provide immediate, off-the-shelf availability at a fraction of the new price.
Features Benefits
All critical engineering changes and updates included
Improved reliability and performance
Worldwide availability through Caterpillar? parts distribution system
Customer access regardless of location
Backed by Cat warranty
Consistent support
Core Acceptance
Core Acceptance Criteria (SELD0212) for Caterpillar Remanufactured Rocker Arm Assemblies is simple, visual, and requires no special tools. Consult your Core Acceptance Guide for complete details.
Warranty
Please consult the appropriate warranty statement for your area. Core Management
Please refer to the Caterpillar Core Management Information System (CMIS 2) Parts Information application describing all reman part/CAF and related information. Also refer to other CMIS 2 inquiry applications such as Customer Profiles, Inspection Reason Codes, Inspection Line Inquiry, Add Charge Information, Entitlement Activity, Entitlement Inquiry, CCR Inquiry, CCR Entry, Shipment Processing; Process Packaging Grief; and Reporting to properly manage core returns and monitor inspection performance. This information will be available to all dealers worldwide after your CMIS 2 conversion date. In the meantime, please continue to use the current CMIS Entitlement Parts Inquiry Screen describing the list of parts in a Core Acceptability Family (CAF) and related part number detail.
For the latest updates of Reman Policies and Core Management (SELD0122), Core Management Systems & Operations Procedures (SELD0040), and Shipping Instructions (SELD0039), go to the Reman Dealer website
If you have any questions regarding core return processing, feel free to call Corinth toll free at (800) 537-2928. For assistance with technical questions, call the Peoria Reman Help Line also toll free at (888) 88-REMAN or use our E-mail address--Reman_Help.
PELJ0737 CATERPILLAR? ?2006 Caterpillar