101341-0002 ZEXEL 9 400 613 527 BOSCH INJECTION-PUMP ASSEMBLY 9400613527 1013410002 8943423222


 

Information injection-pump assembly

BOSCH 9 400 613 527 9400613527
ZEXEL 101341-0002 1013410002
ISUZU 8943423222 8943423222
101341-0002 INJECTION-PUMP ASSEMBLY
Rating:
13
Buy INJECTION-PUMP ASSEMBLY 101341-0002 zexel genuine, new aftermarket engine parts with delivery

Service parts 101341-0002 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101034-9131
3. GOVERNOR 105419-0121
4. SUPPLY PUMP 105220-5830
5. AUTOM. ADVANCE MECHANIS 105621-0441
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105081-3030
14. NOZZLE 105000-1080
15. NOZZLE SET

Include in #1:

101341-0002 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
101341-0002 
9 400 613 527 
8943423222  ISUZU
INJECTION-PUMP ASSEMBLY
3AB1 K 14BA INJECTION PUMP ASSY PE1A,2A,3A PE




Information:

Fluids/Filters Recommendation
Literature InformationThis manual should be stored in the literature holder or in the literature storage area on the machine. Immediately replace this manual if lost, damaged, or unreadable.The information contained in this document is the most current information available for fluid maintenance and service products. Special maintenance and service products may be required for some machine compartments. Refer to the Operation and Maintenance Manual for your machine for the maintenance and service requirements. Read, study, and keep this manual with the product. This manual should be read carefully before using this product for the first time and before performing maintenance.Whenever a question arises regarding your product, or this publication, consult your dealer for the latest available information.SafetyRefer to the Operation and Maintenance Manual for your machine for all safety information. Read and understand the basic safety precautions listed in the Safety Section. In addition to safety precautions, this section identifies the text and locations of warning signs used on the machine.Read and understand the applicable precautions listed in the Maintenance and Operation Sections before operating or performing lubrication, maintenance, and repair on this machine.MaintenanceRefer to the Operation and Maintenance Manual for your machine to determine all maintenance requirements.Proper maintenance and repair are essential to keep the equipment and systems operating correctly. As the owner, you are responsible for the performance of the required maintenance listed in the Owner Manual, Operation and Maintenance Manual, and Service Manual.Maintenance Interval ScheduleUse the Maintenance Interval Schedule in the Operation and Maintenance Manual for your machine to determine servicing intervals. Use the service hour meter to determine servicing intervals. Calendar intervals shown (daily, weekly, monthly, etc.) can be used instead of service hour meter intervals if calendar intervals provide more convenient servicing schedules and approximate the indicated service hour meter reading. Recommended service should always be performed at the interval that occurs first.Under extremely severe, dusty, or wet operating conditions, more frequent lubrication and/or filter changes than is specified in the maintenance intervals chart might be necessary.Following the recommended maintenance intervals reduces the risk of excessive wear and potential failures of components.Aftermarket Products and Warranty
When auxiliary devices, accessories or consumables (filters, oil, additives, catalysts, fuel, etc.) made by other manufacturers are used on Cat products, the Caterpillar warranty is not affected simply because of such use. Failures that result from the installation or usage of other manufacturers auxiliary devices, accessories or consumables, however, are not Caterpillar factory defects and therefore are NOT covered by Caterpillar's warranty.Caterpillar is not in a position to evaluate the many auxiliary devices, accessories or consumables promoted by other manufacturers and their effect on Cat products. Installation or use of such items is at the discretion of the customer who assumes ALL risks for the effects that result from this usage.Furthermore, Caterpillar does not authorize the use of its trade name, trademark, or logo in a manner which implies our endorsement of these aftermarket products.

Have questions with 101341-0002?





Group cross 101341-0002 ZEXEL

Isuzu 

 
8943423220 
INJECTION-PUMP ASSEMBLY
3AB1
 
8943423221 
INJECTION-PUMP ASSEMBLY
3AB1
101341-0002  
9 400 613 527 
8943423222 
INJECTION-PUMP ASSEMBLY
3AB1
Back to top