101322-0110 ZEXEL F 019 Z10 147 BOSCH INJECTION-PUMP ASSEMBLY f019z10147 1013220110 5156004853

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH F 019 Z10 147 f019z10147

ZEXEL 101322-0110 1013220110

ISUZU 5156004853 5156004853

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101322-0110 zexel genuine, new aftermarket engine parts with delivery

Service parts 101322-0110 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101032-9041

3. GOVERNOR 105410-1660

4. SUPPLY PUMP 105220-4212

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE 156635-0420

8. _

9. _

10. NOZZLE AND HOLDER ASSY

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 11.8{120}

13. NOZZLE-HOLDER 105081-3030

14. NOZZLE

105000-1080

15. NOZZLE SET

Include in #1:

101322-0110 as INJECTION-PUMP ASSEMBLY

106671-8520 as _

Cross reference number

BOSCH F 019 Z10 147 f019z10147

ZEXEL 101322-0110 1013220110

ISUZU 5156004853 5156004853

Zexel num

Bosch num

Firm num

Name

101322-0110

F 019 Z10 147

5156004853 ISUZU

INJECTION-PUMP ASSEMBLY
3AA1 * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-3-2

Pre-stroke mm 1.75 1.7 1.8

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 2
Cyl.1-2 deg. 240 239.5 240.5

Injection quantity adjustment

Adjusting point A

Rack position 12.5

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 36.8 33.8 39.8

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 13.6

Pump speed r/min 850 850 850

Average injection quantity mm3/st. 40.4 38.7 42.1

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the lever *

Injection quantity adjustment_03

Adjusting point C

Rack position 7.7+-0.5

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 8 6.9 9.1

Max. variation between cylinders % 0 -14 14

Fixing the rack *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)At rack cap installation: R1
----------
K=8 R1=(17.5)mm
----------

Speed control lever angle

F:Full speed I:Idle S:Stop
----------

----------
a=18deg+-5deg b=34deg+-5deg c=32deg+-3deg

Information:

Table 2
Petroleum Engine Software and Fuel Injectors
Serial Prefix Arrangement Rating Speed (RPM) Previous Injector Part Number Previous Software Part Number New Injector Part Number New Software Part Number
S/N:P6L 347-4602 IMO 2 / EPA T2 1200 349-2522 Primary : 459-0094
Secondary : 459-0095 443-9455 Primary : 482-0388
Secondary : 482-0389
S/N:P5P 387-8280 IMO 2 1500 349-2522 Primary : 456-7088
Secondary : 456-7089 443-9455 Primary : 482-0390
Secondary : 482-0391
Table 3
Marine Engine Software and Fuel Injectors
Serial Prefix Arrangement Rating Speed (RPM) Previous Injector Part Number Previous Software Part Number New Injector Part Number New Software Part Number
S/N:M6A 282-7824 Tier 2 / IMO 2 1800 331-5894 Primary : 468-4163
Secondary : 468-4164 443-9454 Primary : 482-8614
Secondary : 482-8617
S/N:M6B 289-4901 Tier 3 / IMO 2 1600 331-5894 Primary : 468-4161
Secondary : 468-4162 443-9454 Primary : 482-6505
Secondary : 482-6506
S/N:M6B 479-0369 Tier 3 / IMO 2 1600 331-5894 N/A 443-9454 Primary : 480-4441
Secondary : 480-4442
Table 4
Locomotive Engine Software and Fuel Injectors
Serial Prefix Arrangement Rating Speed (RPM) Previous Injector Part Number Previous Software Part Number New Injector Part Number New Software Part Number
S/N:KWT 443-9610 EU3A 1800 331-5894 476-1220 443-9454 488-7965
S/N:Y3A 345-8445 / 452-6860 EU3A 1800 331-5894 476-1220 443-9454 488-7965
S/N:3A9 443-2993 EU3A 1800 331-5894 476-1220 443-9454 488-7965