105866-4071 ZEXEL F 019 Z2E 428 BOSCH HYDRAULIC GOVERNOR f019z2e428 1058664071


 

Information hydraulic governor

BOSCH F 019 Z2E 428 f019z2e428
ZEXEL 105866-4071 1058664071
105866-4071 HYDRAULIC GOVERNOR
Rating:
15
Buy HYDRAULIC GOVERNOR 105866-4071 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 105866-4071
1. _
2. FUEL INJECTION PUMP
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY
8. Nozzle and Holder
9. Open Pre:MPa(Kqf/cm2)
10. NOZZLE-HOLDER
11. NOZZLE

Scheme ###:

1. [1] 158502-0420 BASE
2. [1] 029811-8000 BEARING PLATE
3. [1] 158528-0900 PACKING RING
7. [1] 158131-0100 GEAR SHAFT
10. [1] 158028-0000 O-RING
11. [1] 158507-1920 DIAPHRAGM HOUSING
13. [1] 158621-0800 SLEEVE
18. [1] 158699-0621 COMPENSATOR ASSY
18/1. [1] 158610-1101 POWER PISTON
18/3. [1] 158654-0800 COILED SPRING
18/4. [1] 158614-0700 STOP PIN
18/5. [1] 158612-0500 PLAIN WASHER
18/6. [1] 158654-0900 COILED SPRING
18/7. [1] 016110-1220 LOCKING WASHER
18/8. [1] 158612-0401 BUSHING
18/9. [2] 016550-2310 O-RING
18/10. [1] 158615-0500 PUMP PLUNGER
18/11. [1] 025620-1410 SPRING PIN
35. [3] 029330-6070 GASKET
36. [3] 010206-2520 HEX-SOCKET-HEAD CAP SCREW
50. [1] 158600-1020 FLYWEIGHT ASSEMBLY
51. [1] 158106-0100 PLAIN WASHER
52. [1] 029811-0000 BEARING PLATE
53. [1] 158620-1220 PILOT VALVE
60. [2] 158220-0000 GUIDE LEVER
61. [2] 158736-0200 BEARING PIN
62. [4] 025520-1510 SPLIT PIN
70. [1] 158730-0220 TERMINAL ARM
70/1. [1] 158230-0020 TERMINAL ARM
70/2. [1] 158315-0200 TERMINAL SHAFT
70/3. [1] 158315-0200 TERMINAL SHAFT
70/4. [2] 158736-0100 TAPER PIN
70/5. [2] 011006-0620 SET OF NUTS
70/6. [1] 158214-0020 SPEED DROOP ADJUSTER
70/7. [1] 014020-5120 PLAIN WASHER
70/8. [1] 029320-5030 TAB WASHER
70/9. [1] 010535-1220 FLAT-HEAD SCREW
85. [1] 158814-0900 SPEED CONTROL SHAFT
86. [2] 158823-0300 BUSHING
86. [2] 158823-0300 BUSHING
87. [1] 158322-0200 COILED SPRING
88. [1] 158710-0400 STRAP
89. [1] 029404-5010 BEARING PIN
95. [1] 158211-0100 STRAP
96. [2] 158653-0100 WIRE
104. [1] 158017-0900 GASKET
105. [1] 158962-7820 PNEUMATIC CONTROLLER
105/1. [1] 158562-4600 COVER
105/2. [1] 158910-0200 CYLINDER
105/3. [3] 029050-6090 FLAT-HEAD SCREW
105/4. [1] 014110-6440 LOCKING WASHER
105/5. [1] 158416-0000 FLAT-HEAD SCREW
105/6. [1] 158915-0700 UNION NUT
105/7. [1] 158918-0000 PLAIN WASHER D30&10.8T1.00
105/8. [1] 158412-0200 COILED SPRING K2.0
105/9. [1] 158912-0600 COILED SPRING K5.1
105/10. [1] 158918-0000 PLAIN WASHER D30&10.8T1.00
105/11. [1] 158413-0001 STOP PIN
105/12. [1] 158414-0000 PUMP PLUNGER
105/13. [1] 158414-0100 DIAPHRAGM
105/14. [1] 158414-0200 PLATE
105/15. [1] 013020-6040 UNION NUT M6P1H5
105/16. [1] 158910-0300 CAP
105/17. [1] 158915-1000 FLAT-HEAD SCREW
105/18. [1] 029630-9050 O-RING
105/19. [1] 158567-1500 WING NUT
105/21. [1] 158904-2020 ROUND NUT
105/22. [1] 158916-0000 SET OF NUTS
105/23. [2] 029050-6220 FLAT-HEAD SCREW
105/24. [2] 029320-6010 LOCKING WASHER
105/25. [2] 158909-0200 BLEEDER SCREW
105/26. [1] 027114-1040 INLET UNION
105/27. [2] 029331-4120 GASKET D18&14.2T1.5
105/28. [1] 027414-2640 EYE BOLT
105/30. [1] 013020-6040 UNION NUT M6P1H5
105/31. [1] 158567-1200 SET OF NUTS
105/35. [1] 026512-1640 GASKET D15.9&12.2T1
105/36. [1] 158066-0000 BLEEDER SCREW
106. [4] 029010-6350 BLEEDER SCREW M6P1.0L22
118. [1] 158527-0200 NEEDLE VALVE
119. [1] 016500-0710 O-RING
123. [2] 026512-1640 GASKET D15.9&12.2T1
124. [2] 029111-2070 CAPSULE M12P1.5L10
130. [1] 029331-8040 GASKET
131. [1] 158660-0320 CONTROL VALVE
135. [1] 158515-0900 INDICATOR PLATE
137. [1] 158515-1000 INDICATOR PLATE
140. [1] 158820-0620 POINTER
142. [1] 158820-0620 POINTER
158. [1] 015040-0880 BEARING PIN
163. [1] 010210-1420 HEX-SOCKET-HEAD CAP SCREW
164. [1] 026510-1340 GASKET D13.4&10.2T1
190. [1] 158017-1000 GASKET
200. [1] 158599-7320 SPARE PART

Include in #2:

105866-4071 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
105866-4071 
F 019 Z2E 428 
RHD10-PC 
   
HYDRAULIC GOVERNOR
K




Information:

Emissions Warranty
Caterpillar Inc. warrants to the initial owner and subsequent owner of a diesel truck engines (powering on-highway trucks), that such engine is ...1. Designed, built and equipped so as to conform, at the time of sale, with all applicable regulations adopted by the United States Environmental Protection Agency (EPA).2. Free from defects in materials and workmanship in specific emission related parts for a period of 60 months, 100,000 miles (161 000 km) or 3,000 hours of operation, whichever occurs first, after date of delivery to the initial owner.If an emission related part fails during the warranty period, it will be repaired or replaced. Any such part repaired or replaced under warranty is warranted for the remainder of the warranty period.During the term of this warranty, Caterpillar Inc. will provide through a Caterpillar dealer or other establishment authorized by it, repair or replacement of any warranted part at no charge to the truck engine owner.In an emergency, repairs may be performed at any service establishment, or by the owner, using any replacement part.Caterpillar Inc. will reimburse the owner for their expenses, including diagnostic charges for such emergency repair. These expenses shall not exceed Caterpillar Inc. suggested retail price for all warranted parts replaced, and labor charges based on Caterpillar Inc. recommended time allowance for the warranty repair and the geographically appropriate hourly labor rate.As a condition of reimbursement, replaced parts and receipted invoices must be presented at a place of business of a Caterpillar dealer or other establishment authorized by Caterpillar Inc.Limitations & Responsibilities
The warranty is subject to the following:Caterpillar Inc. Responsibilities
During the emission warranty period, if a defect in material or workmanship of an emission related part or component is found, Caterpillar Inc. will provide:* New, Remanufactured or repaired parts and/or components, approved pursuant to EPA Regulations, required to correct the defect. Items replaced under this warranty become the property of Caterpillar Inc.* Reasonable and customary labor, during normal working hours, required to make the warranty repair. This includes labor to remove and install the engine, if necessary.Owner Responsibilities
During the emission warranty period, the owner is responsible for:* Premium or overtime labor costs, unless essential to prevent loss to perishable goods.* Costs to investigate complaints which are not caused by a defect in Caterpillar Inc. material or workmanship.* Providing timely notice of a warrantable failure and promptly making the product available for repair.Limitations
Caterpillar Inc. is not responsible for resultant damages to an emission related part or component resulting from:* Any application or installation Caterpillar Inc. deems improper.* Attachments, accessory items or parts not sold nor approved by Caterpillar Inc.* Improper truck engine maintenance, repair or abuse.* Owner's unreasonable delay in making the product available after being notified of a potential product problem.This warranty is in addition to Caterpillar Inc. standard warranty, applicable to the truck engine product involved.Remedies under this warranty are limited to the provision of material and services as specified herein. Caterpillar Inc. is not responsible for incidental or consequential damages.

Have questions with 105866-4071?





Group cross 105866-4071 ZEXEL

F 019 Z2E 423 
RHD10-PC 
 
HYDRAULIC GOVERNOR
 
 

 
 

F 019 Z2E 424 
RHD10-PC 
 
HYDRAULIC GOVERNOR
F 019 Z2E 425 
RHD10-PC 
 
HYDRAULIC GOVERNOR

Niigata-Urawa 

 
17720031A 
HYDRAULIC GOVERNOR
F 019 Z2E 426 
RHD10-PC 
 
HYDRAULIC GOVERNOR
F 019 Z2E 427 
RHD10-PC 
 
HYDRAULIC GOVERNOR
105866-4071  
F 019 Z2E 428 
RHD10-PC 
 
HYDRAULIC GOVERNOR
 
 

Niigata-Urawa 

F 019 Z2E 429 
74044132C 
HYDRAULIC GOVERNOR
Back to top