Information hole-type nozzle
BOSCH
9 432 610 692
9432610692
ZEXEL
105017-2020
1050172020
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
DLLA155PN198 DLLA155PN202 DLLA156PN248 DLLA156PN262 DLLA157PN090 DLLA157PN133 Fuel system fitting nozzle(DLLA155PN198)
UJMLQVPXR Easy Maintenance: Easy to install and dismantle. || Broad Compatibility: Supports multiple fuel types. || Silent Operation: Optimized fluid dynamics design reduces noise during fuel injection. || Enhanced Power: Achieving rapid fuel injection boosts acceleration and power output. || Accurate Fuel Injection: Manufacturing technology enhances combustion efficiency, reducing fuel waste.
UJMLQVPXR Easy Maintenance: Easy to install and dismantle. || Broad Compatibility: Supports multiple fuel types. || Silent Operation: Optimized fluid dynamics design reduces noise during fuel injection. || Enhanced Power: Achieving rapid fuel injection boosts acceleration and power output. || Accurate Fuel Injection: Manufacturing technology enhances combustion efficiency, reducing fuel waste.
Injector Nozzle DLLA155PN202 4PCS Diesel Fuel Pump Fuel PN Nozzles 105017-2020 Suit for H-yundai M-ighty County HD72/D4AL/D4AF
Generic OEM part number: DLLA155PN202,DLLA 155 PN 202,105017-2020,NP-DLLA155PN202. || Package: 4 pieces of injector nozzles.Neutral packing. || Size: Standard size,Fuel injector nozzle DLLA155PN202 105017-2020 . || Material: Made of high speed steel material,anti-rust, not easy to clog for long time use. || Diesel Injection Nozzles Tips improved fuel efficiency and enhanced power. Inyectores de carro offer fuel spray patterns.Compatible with fuel injectors, this nozzle is specifically designed for diesel fuel injection systems.
Generic OEM part number: DLLA155PN202,DLLA 155 PN 202,105017-2020,NP-DLLA155PN202. || Package: 4 pieces of injector nozzles.Neutral packing. || Size: Standard size,Fuel injector nozzle DLLA155PN202 105017-2020 . || Material: Made of high speed steel material,anti-rust, not easy to clog for long time use. || Diesel Injection Nozzles Tips improved fuel efficiency and enhanced power. Inyectores de carro offer fuel spray patterns.Compatible with fuel injectors, this nozzle is specifically designed for diesel fuel injection systems.
You can express buy:
USD 21
13-05-2025
13-05-2025
free shipping 4 pieces Fule Nozzle DLLA155PN202 / 105017-2020 Diesel nozzle 9 432 610 692
USD 5
16-01-2019
16-01-2019
DLLA155PN202 Diesel nozzle 9 432 610 692 105017-2020
Images:
USD 5
[16-Jan-2019]
USD 20
[05-May-2019]
USD 25
[24-Jun-2019]
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Additional Parts Needed for Installation
Fluid Property Sensor Mounting Bracket
A mounting bracket must be fabricated to support the Fluid Property Sensor. Since the kit can be used on a large range of engines in both stationary and machine applications, no universal mounting bracket design is possible. A bracket must be field fabricated to allow mounting of the sensor to a structural component of the machine. Leave room for electrical connection and room at each end for Engine Lubricating Oil line connections.Fittings and Adapters
Due to the large range of engines that this system may be used on, a list of all Engine Lubrication Oil line fittings, sizes, styles, and adapters are not possible. As a starting point, the inlet and outlet of the sensor adapter is a 37 degree Flare for 1" oil lines. This must be adapted to the correct size oil line tubing required for each engine. It is likely that the supply and return fuel lines will be of different sizes. It is recommended that the oil line tubing be new and in good condition. The tubing MUST be clean inside. Any small particles that are carried from the inlet hose through the transducer from the system and dislodge the particles. If hoses are equipped with O-ring fittings, the O-rings must be new.Wiring Diagram
Note: During Installation, it is important to protect wiring in key locations. Key locations are any area where the wiring could be nicked or cut and come in contact with the chassis. Avoid installation practices where there could be excessive flexing, chafing, or cutting of the wiring.
Illustration 1 g06137996
Fluid Property Sensor Wiring Schematic
Installation
Machine Preparation
Move the machine to a smooth, level location, and away from other working machines and personnel.
Lower the implements to the ground.
Stop the engine.
Engage the parking brake for the machine.
Place the disconnect switch in the OFF position.
Follow all LOTO instructions for the machine.Installation of the Fluid Property Sensor
The Fluid Property Sensor must be located on a field fabricated bracket in a location of the installer's choice. When selecting a mounting location, the installer must mount the sensor in an area off the engine to reduce vibration of the sensor as well as accessibility of sensor and electrical connection. Electrical connections should avoid sharp bends at connectors, sharp edges, and chafing surfaces. Harnesses should be supported at no less than 30.48 cm (12 inch) intervals. The Fluid Property Sensor must be installed with the orifice opening in the upright position as shown in Illustration 2.
Illustration 2 g06138010
Fluid Property Sensor Installation
(A) Oil Pump
(B) Oil Filter
(C) Engine Oil Gallery
(D) Isolation Valve
(E) Oil Flow
(F) Fluid Property Sensor Orientation
(G) Oil Reservoir
(H) Oil Strainer
(I) Engine Oil SumpInstallation of the Electrical Harnesses
Note: During installation, it is important to protect wiring in key locations. Key locations are any area where the wiring could be nicked or cut and come in contact with the chassis. Avoid installation practices where there could be excessive flexing, chafing, or cutting of the wiring.
Install the 514-3811 Instl GP-Field (Fluid Property Harness) on Fluid Property Sensor.
Route harness back
Fluid Property Sensor Mounting Bracket
A mounting bracket must be fabricated to support the Fluid Property Sensor. Since the kit can be used on a large range of engines in both stationary and machine applications, no universal mounting bracket design is possible. A bracket must be field fabricated to allow mounting of the sensor to a structural component of the machine. Leave room for electrical connection and room at each end for Engine Lubricating Oil line connections.Fittings and Adapters
Due to the large range of engines that this system may be used on, a list of all Engine Lubrication Oil line fittings, sizes, styles, and adapters are not possible. As a starting point, the inlet and outlet of the sensor adapter is a 37 degree Flare for 1" oil lines. This must be adapted to the correct size oil line tubing required for each engine. It is likely that the supply and return fuel lines will be of different sizes. It is recommended that the oil line tubing be new and in good condition. The tubing MUST be clean inside. Any small particles that are carried from the inlet hose through the transducer from the system and dislodge the particles. If hoses are equipped with O-ring fittings, the O-rings must be new.Wiring Diagram
Note: During Installation, it is important to protect wiring in key locations. Key locations are any area where the wiring could be nicked or cut and come in contact with the chassis. Avoid installation practices where there could be excessive flexing, chafing, or cutting of the wiring.
Illustration 1 g06137996
Fluid Property Sensor Wiring Schematic
Installation
Machine Preparation
Move the machine to a smooth, level location, and away from other working machines and personnel.
Lower the implements to the ground.
Stop the engine.
Engage the parking brake for the machine.
Place the disconnect switch in the OFF position.
Follow all LOTO instructions for the machine.Installation of the Fluid Property Sensor
The Fluid Property Sensor must be located on a field fabricated bracket in a location of the installer's choice. When selecting a mounting location, the installer must mount the sensor in an area off the engine to reduce vibration of the sensor as well as accessibility of sensor and electrical connection. Electrical connections should avoid sharp bends at connectors, sharp edges, and chafing surfaces. Harnesses should be supported at no less than 30.48 cm (12 inch) intervals. The Fluid Property Sensor must be installed with the orifice opening in the upright position as shown in Illustration 2.
Illustration 2 g06138010
Fluid Property Sensor Installation
(A) Oil Pump
(B) Oil Filter
(C) Engine Oil Gallery
(D) Isolation Valve
(E) Oil Flow
(F) Fluid Property Sensor Orientation
(G) Oil Reservoir
(H) Oil Strainer
(I) Engine Oil SumpInstallation of the Electrical Harnesses
Note: During installation, it is important to protect wiring in key locations. Key locations are any area where the wiring could be nicked or cut and come in contact with the chassis. Avoid installation practices where there could be excessive flexing, chafing, or cutting of the wiring.
Install the 514-3811 Instl GP-Field (Fluid Property Harness) on Fluid Property Sensor.
Route harness back