159561-1720 ZEXEL 9 421 621 710 BOSCH GOVERNOR COVER 9421621710 1595611720 1937399518


 

Information governor cover

BOSCH 9 421 621 710 9421621710
ZEXEL 159561-1720 1595611720
NISSAN-DIESEL 1937399518 1937399518
159561-1720 GOVERNOR COVER
Rating:
27
Buy GOVERNOR COVER 159561-1720 zexel genuine, new aftermarket engine parts with delivery

Include in ###:

Number on scheme 13
GOVERNOR COVER
1059600130 as GOVERNOR COVER

Cross reference number

Zexel num
Bosch num
Firm num
Name
159561-1720 
9 421 621 710 
1937399518  NISSAN-DIESEL
GOVERNOR COVER
C 75KB COVER;GOV.




Information:

There are two water temperature regulators, one for each cylinder head.1. Drain the coolant from the engine to a level below the water temperature regulators.
Typical Example2. Remove elbow (1). Remove tube and elbow (2). 3. Remove cover assemblies (3). 4. Remove water temperature regulator (4) from each cover assembly. 5. Remove lip-type seal (5) from each cover assembly if a replacement is necessary.6. Check the water temperature regulators. See Specifications Manual SENR6475. The following steps are for the installation of the water temperature regulators. 7. Use Tool (A) to install lip-type seals (5). Install the seals with the lip toward the inside of the covers. Install the seal until it contacts the counterbore in the cover assembly.
If the water temperature regulators are installed incorrectly the engine will over heat.
8. Put clean glycerin on the lip of seal (5), and install water temperature regulator (4) in each cover assembly (3). 9. Install new gaskets (6) and cover assemblies (3).
Typical Example10. Install the gaskets and elbow (1). Put clean engine oil or glycerin on the O-ring seals on tube (2). Install the gasket, tube and elbow (2).11. Fill the cooling system to the correct level. See the Operation & Maintenance Manual.

Have questions with 159561-1720?





Group cross 159561-1720 ZEXEL

 
 

Nissan-Diesel 

159561-1720  
9 421 621 710 
1937399518 
GOVERNOR COVER
 
 

Back to top