146508-8121 ZEXEL 9 461 613 631 BOSCH GOVERNOR COVER 9461613631 1465088121 1924030n11


 

Information governor cover

BOSCH 9 461 613 631 9461613631
ZEXEL 146508-8121 1465088121
NISSAN-DIESEL 1924030N11 1924030n11
146508-8121 GOVERNOR COVER
Rating:
37
Buy GOVERNOR COVER 146508-8121 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
146508-8121 
9 461 613 631 
1924030N11  NISSAN-DIESEL
GOVERNOR COVER
C 11FV COVER;GOV. parts(VE) Others




Information:

Add Coolant Additive (Conditioner)
1. Release the cooling system relief valve slowly to relieve pressure and remove filler cap. Inspect condition of cap gasket. Replace cap if necessary.2. It may be necessary to drain enough coolant from the system to allow for the addition of cooling system additive (conditioner).3. Add Caterpillar Cooling System Conditioner. Add 0.24 liter (1/2 U.S. pint) of Caterpillar Cooling System Additive (Conditioner) for each 38 liter (10 U.S. gallon) of cooling system capacity. This will maintain the required concentration of conditioner. On new, rebuilt or remanufactured engines only, or when draining and changing the coolant, add liquid additive concentration of coolant additive of 1 liter (1 U.S. quart) for every 15 liter (4 U.S. gallon) of cooling system capacity for systems using water as coolant only.Caterpillar Antifreeze contains the necessary coolant additive precharge. Only add the coolant additive precharge if you have decided not to use Caterpillar Antifreeze.Refer to the Refill Capacities chart in this publication for the cooling system capacity for your engine.
Do not use any Methoxypropanol-based antifreeze or coolants such as Dowtherm 209 Full-Fill coolant in the cooling system. Methoxypropanol will cause some seals and gaskets to deteriorate and fail.
4. Maintain coolant level to within 13 mm (1/2 in) below the bottom of the filler tube or to the proper level (upper half) on the sight glass, if equipped. Add premixed coolant if necessary to bring the coolant to the proper level.Refer to the topic Cooling System Specifications in the Specifications section in this manual for additional information about coolant mixture and supplemental coolant additive.5. Start the engine and check for leaks or damaged piping. Allow the coolant level to stabilize. Inspect the cooling system pipes and lines for leaks and/or damaged connections. Make repairs if necessary. Install the filler cap.Coolant Analysis
Obtain Coolant Sample
There are

Have questions with 146508-8121?





Group cross 146508-8121 ZEXEL

Nissan 

9 461 612 076 
1924002N11 
GOVERNOR COVER

Nissan-Diesel 

9 461 612 076 
1924002N11 
GOVERNOR COVER
146508-8121  
9 461 613 631 
1924030N11 
GOVERNOR COVER
Back to top