Fuel injectors
  1. Home
  2. governor
  3. #1059321720

105932-1720 ZEXEL 9 420 611 361 BOSCH GOVERNOR 9420611361 1059321720 8971429750


 

Information governor

BOSCH 9 420 611 361 9420611361
ZEXEL 105932-1720 1059321720
ISUZU 8971429750 8971429750
105932-1720 GOVERNOR
Rating:
59
Buy GOVERNOR 105932-1720 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

GOVERNOR HOUSING
1. [1] 159200-7120 GOVERNOR HOUSING
2. [1] 154007-0200 ADAPTOR
3. [1] 020018-1840 BLEEDER SCREW M8P1.25L18
4. [1] 159232-1600 PLATE
5. [5] 029010-6810 BLEEDER SCREW
5B. [1] 020106-1640 BLEEDER SCREW M6P1.0L14
6. [1] 159242-0600 BUSHING
7. [1] 139710-0200 O-RING
8. [1] 159205-2321 LEVER SHAFT
9. [1] 159202-7100 CONTROL LEVER
10. [1] 016010-0810 LOCKING WASHER
11/1. [0] 029311-0220 SHIM D18&10.3T0.2
11/1. [0] 029311-0230 SHIM D18&10.3T0.5
11/1. [0] 029311-0430 SHIM D18&10.3T0.30
11/1. [0] 029311-0440 SHIM D18&10.3T0.40
11/1. [0] 029311-0450 SHIM D18&10.3T0.25
11/1. [0] 029311-0460 SHIM D18&10.3T0.35
11/1. [0] 139410-3300 SHIM D18&10.3T0.6
11/1. [0] 139410-3400 SHIM D18&10.3T0.8
11/1. [0] 139410-3500 SHIM D18&10.3T0.9
12. [1] 159215-0000 COILED SPRING
13. [1] 159242-6601 CONTROL LEVER
15. [1] 013020-8040 UNION NUT M8P1.25H7
16. [1] 159237-5500 CAPSULE
17. [1] 159202-5320 CONTROL LEVER
18. [1] 159215-0300 COILED SPRING
20. [1] 159291-0620 CONTROL LEVER
22. [1] 139610-0700 PACKING RING
23/1. [0] 139410-3800 SHIM D22&10.2T0.2
23/1. [0] 139410-3900 SHIM D22&10.2T0.3
23/1. [0] 139410-4000 SHIM D22&10.2T0.4
23/1. [0] 139410-4100 SHIM D22&10.2T0.6
23/1. [0] 139410-4200 SHIM D22&10.2T0.8
24. [1] 159215-4200 COILED SPRING
25. [1] 159235-6500 CAP
26. [1] 159290-3021 CONTROL LEVER
27. [1] 020006-1240 BLEEDER SCREW M6P1L12 4T
35. [1] 159255-2020 GOVERNOR COVER
35/1. [1] 159301-6420 GOVERNOR COVER
35/2. [1] 159205-0400 LEVER SHAFT
35/3. [2] 159237-0200 CAPSULE
35/3. [2] 159237-0200 CAPSULE
35/4. [1] 159253-2720 TENSIONING LEVER
35/4/2. [1] 159204-6022 RACK
35/4/3. [1] 159233-0300 UNION NUT
35/4/4. [1] 159234-0300 FLAT-HEAD SCREW
35/4/5. [1] 159216-0000 COILED SPRING
35/4/6. [1] 159216-0100 COILED SPRING
35/4/7. [1] 159216-0700 COILED SPRING
35/5. [1] 159203-6120 GUIDE LEVER
35/7. [1] 159215-1701 COILED SPRING
35/8. [1] 159231-1300 BEARING PIN
35/9. [2] 016010-0610 LOCKING WASHER
35/10. [1] 159238-2900 BUSHING
51. [6] 020106-3840 BLEEDER SCREW
51B. [1] 020106-4040 BLEEDER SCREW
65. [1] 154611-5920 RACK SENSOR ASSY
65/1. [1] 407945-0140 RACK SENSOR
65/2. [1] 154390-4000 GASKET
65/3. [2] 020106-1670 BLEEDER SCREW
100. [1] 154101-0420 FLYWEIGHT ASSEMBLY
101. [1] 025803-1610 WOODRUFF KEY
102. [1] 029321-2020 LOCKING WASHER
103. [1] 029231-2030 UNION NUT
110. [1] 154123-2320 SLIDING PIECE
111/1. [0] 029311-0010 SHIM D14&10.1T0.2
111/1. [0] 029311-0180 SHIM D14&10.1T0.3
111/1. [0] 029311-0190 SHIM D14&10.1T0.40
111/1. [0] 029311-0210 SHIM D14&10.1T1
111/1. [0] 139410-0000 SHIM D14.0&10.1T0.5
111/1. [0] 139410-0100 SHIM D14.0&10.1T1.5
111/1. [0] 139410-3000 SHIM D14&10.1T2.0
111/1. [0] 139410-3100 SHIM D14&10.1T3.0
111/1. [0] 139410-3200 SHIM D14&10.1T4.0
112. [1] 159236-0200 TERMINAL STUD
130. [1] 159210-0900 GOVERNOR SPRING
131. [1] 159211-4000 GOVERNOR SPRING
132. [1] 159214-0200 COILED SPRING
133. [1] 159219-0820 SPRING PACK
133/1. [1] 159234-5602 GUIDE SLEEVE
133/2. [1] 159212-5000 COILED SPRING
133/3. [1] 159212-8600 COILED SPRING
133/4/1. [0] 029310-9240 SHIM D11.9&9T0.1
133/4/1. [0] 029310-9250 SHIM D11.9&9T0.2
133/4/1. [0] 029310-9260 SHIM D11.9&9T0.25
133/4/1. [0] 029310-9270 SHIM D11.9&9T1.0
133/4/1. [0] 139409-0100 SHIM D11.9&9T0.3
133/4/1. [0] 139409-0200 SHIM D11.9&9T0.5
133/4/1. [0] 139409-0300 SHIM D11.5&9T0.8
135. [1] 159248-2700 FLAT-HEAD SCREW
137. [1] 159237-5300 CAPSULE
140. [1] 159205-2101 LEVER SHAFT
145. [1] 159233-5700 UNION NUT
149. [1] 159237-5400 CAPSULE
150. [1] 159235-5300 SLOTTED WASHER
155. [1] 159204-7420 STRAP
156. [1] 159233-0620 BLEEDER SCREW
158. [1] 013020-5240 UNION NUT M5P0.8H4
160. [1] 159252-2221 LEVER GROUP
160/1. [1] 159205-3711 LEVER SHAFT
160/2. [1] 159202-4810 CONTROL LEVER
160/3. [1] 029310-6030 SHIM D11.5&6.2T0.2
160/4. [1] 159202-4520 CONTROL LEVER
160/5. [1] 159202-2200 CONTROL LEVER
160/6. [1] 159215-2301 COILED SPRING
160/7. [1] 159215-3900 COILED SPRING
160/8. [1] 016010-0810 LOCKING WASHER
160/9. [1] 014020-6140 PLAIN WASHER
160/10. [1] 016010-0610 LOCKING WASHER
160/11. [1] 016010-0810 LOCKING WASHER
168/1. [0] 029311-0640 SHIM D26.0&10.2T0.95
168/1. [0] 029311-0650 SHIM D26.0&10.2T0.20
168/1. [0] 029311-0660 SHIM D26.0&10.2T0.25
168/1. [0] 029311-0670 SHIM D26.0&10.2T0.30
168/1. [0] 029311-0680 SHIM D26.0&10.2T0.35
168/1. [0] 029311-0690 SHIM D26.0&10.2T0.40
168/1. [0] 029311-0700 SHIM D26.0&10.2T0.50
168/1. [0] 139410-1400 SHIM D26&10.2T0.7
168/1. [0] 139410-1500 SHIM D26&10.2T0.9
168/1. [0] 139410-1600 SHIM D26&10.2T0.8
168/1. [0] 139410-2700 SHIM D26&10.2T0.6
169. [1] 159238-4300 SHIM
170. [1] 159263-4421 CONTROL LEVER
172. [1] 013020-8040 UNION NUT M8P1.25H7
173/1. [1] 139006-3500 BLEEDER SCREW M6P1.0L33
173/1. [1] 139006-3700 BLEEDER SCREW M6P1.0L34
173/1. [1] 139006-3800 BLEEDER SCREW M6P1.0L35
173/1. [1] 139006-3900 BLEEDER SCREW M6P1.0L36
173/1. [1] 139006-5300 BLEEDER SCREW M6P1.0L31
173/1. [1] 139006-5400 BLEEDER SCREW M6P1.0L32
173/1. [1] 155615-2500 BLEEDER SCREW M6P1.0L37
174. [1] 154010-7200 BLEEDER SCREW M8P1.25L62
175. [1] 154010-8100 BLEEDER SCREW M8P1.25L65
176. [1] 159225-8600 UNION NUT
177. [1] 154011-2300 UNION NUT
178. [1] 154011-2800 UNION NUT
236. [1] 154390-0000 GASKET
237. [1] 159238-3100 GASKET
250. [1] 159229-7320 BRACKET
251. [2] 154317-8800 COILED SPRING
252. [1] 020118-1640 BLEEDER SCREW
253. [1] 139010-0000 STUD
254. [1] 020106-1240 BLEEDER SCREW M6P1.0L12
254B. [1] 020106-1440 BLEEDER SCREW M6P1.0L14
257. [2] 154156-0900 TUBE
300. [1] 159286-3700 CAM PLATE
301. [1] 016010-0840 LOCKING WASHER
303. [1] 016010-0540 LOCKING WASHER
311. [1] 159237-0200 CAPSULE
350. [1] 159221-9320 BRACKET
351. [1] 020106-1240 BLEEDER SCREW M6P1.0L12
360. [1] 159229-8023 ADJUSTING DEVICE
361. [2] 020146-1240 BLEEDER SCREW M6P1.0L12

Include in #1:

101401-7190 as GOVERNOR

Cross reference number

Zexel num
Bosch num
Firm num
Name
105932-1720 
105932-1721 
9 420 611 361 
8971429750  ISUZU
GOVERNOR
* K 14JK GOV RLD GOV
105932-1720 
105932-1721 
9 420 611 361 
1920089TB7  NISSAN
GOVERNOR
* K 14JK GOV RLD GOV




Information:

The 169-3374 Injector Sleeve Removal Group is used to remove the brass injector sleeves on 3176 and 3176B Engines, only. This tool group is used with the 9U-6860 Sleeve Replacement Group . The tool group eliminates the tapping and threading operation of the current 9U-6860 Sleeve Replacement Group . The benefits of this method of sleeve removal are easier sleeve removal and little debris that could enter the engine. This tool group uses a crimping die and captured stud similar to the current 3100 Sleeve Removal Tool. This tool group can be used with the cylinder head either on or off the engine.Additional Contact Information
For additional product support questions concerning this tool, contact the Dealer Service Tools Hotline at:USA: 1-800-542-8665, Option 1International: 1-309-578-7372Injector Sleeve Removal
Remove the rocker arms from the cylinder being repaired.
Remove the injector.
Illustration 4 g02888499
Put Sleeve Stud (3) into Injector Sleeve
Drop 142-8280 Sleeve Stud (3) into the injector sleeve and ensure that stud is resting at the bottom of the injector sleeve. The flat disc part of the sleeve stud should be below the top edge of the brass sleeve.
Illustration 5 g02888500
Insert Crimping Swage (9) Into Bore And Over Sleeve Stud (3)
Apply a light coating of grease to the inside cutting edge of crimping swage (9) and insert into the injector bore. Make sure that the tool is resting on the top edge of the brass sleeve by turning or "wiggling" slightly. It is possible for the tool to rest on the casting ledge (indicated by the arrow) in the cylinder head. The threads of sleeve stud (3) should go into the center hole of crimping swage (9), as shown in Figure 5.
Illustration 6 g02888508
Drive Crimping Swage (9) Down Into Injector Sleeve
Using a large hammer, strike the top of crimping swage (9) firmly and squarely. Drive down into the injector bore until the bottom slot is level with the top deck of the cylinder head, as shown in Figure 6.
Illustration 7 g02888509
Remove Driving Swage (9) With Crows Foot Pry Bar (12)
Remove the crimping swage from the injector bore. If the tool is stuck in the bore, use a crows foot pry bar (12) in the slot to work out the tool. Many times there will be a small amount of brass caught between crimping swage (9) and the injector bore causing the tool to stick. When the tool is removed, the top of the brass sleeve should be rolled over, trapping sleeve stud (3) inside the injector sleeve.Note: The sharp edge of crimping swage (9) must remain sharp and free of nicks or damage. This tool may be resharpened only on the inside cutting edge. Any sharpening procedure that reduces the OD of the cutting edge will result in poor tool performance and tool sticking.
Illustration 8 g02888517
Insert Sleeve Jaw (4)
Insert 151-4833 Sleeve Jaw (4) into the injector bore. The sharp edge of the sleeve jaw is designed to lock the rolled-over brass material between the sleeve stud and the sleeve jaw. The sleeve stud is then prevented from

Have questions with 105932-1720?





Group cross 105932-1720 ZEXEL

Isuzu 

105932-1720  

105932-1721 
9 420 611 361 
8971429750 
GOVERNOR

Nissan 

105932-1720  

105932-1721 
9 420 611 361 
1920089TB7 
GOVERNOR

Isuzu 

105932-1721  

105932-1722 
9 420 611 362 
8971434740 
GOVERNOR

Nissan 

105932-1721  

105932-1722 
9 420 611 362 
1920089TD3 
GOVERNOR
105932-1722  
9 420 614 975 
NP-EP/RLD275-1700A2FFL 
 
GOVERNOR
Back to top