Information governor
BOSCH
F 01G 29N 06B
f01g29n06b
ZEXEL
105932-0852
1059320852

Rating:
Scheme ###:
1. | [1] | 159200-8220 | GOVERNOR HOUSING |
2. | [1] | 154007-0200 | ADAPTOR |
3. | [1] | 020018-1840 | BLEEDER SCREW |
4. | [1] | 159232-1600 | PLATE |
5. | [5] | 029010-6810 | BLEEDER SCREW |
5B. | [1] | 020106-1640 | BLEEDER SCREW |
6. | [1] | 159242-0600 | BUSHING |
7. | [1] | 139710-0200 | O-RING |
8. | [1] | 159205-2321 | LEVER SHAFT |
9. | [1] | 159202-7100 | CONTROL LEVER |
10. | [1] | 016010-0810 | LOCKING WASHER |
11/1. | [0] | 029311-0220 | SHIM D18&10.3T0.2 |
11/1. | [0] | 029311-0230 | SHIM D18&10.3T0.5 |
11/1. | [0] | 029311-0430 | SHIM D18&10.3T0.30 |
11/1. | [0] | 029311-0440 | SHIM D18&10.3T0.40 |
11/1. | [0] | 029311-0450 | SHIM D18&10.3T0.25 |
11/1. | [0] | 029311-0460 | SHIM D18&10.3T0.35 |
11/1. | [0] | 139410-3300 | SHIM D18&10.3T0.6 |
11/1. | [0] | 139410-3400 | SHIM D18&10.3T0.8 |
11/1. | [0] | 139410-3500 | SHIM D18&10.3T0.9 |
12. | [1] | 159215-0000 | COILED SPRING |
13. | [1] | 159242-6601 | CONTROL LEVER |
15. | [1] | 013020-8040 | UNION NUT |
16. | [1] | 159237-5500 | CAPSULE |
17. | [1] | 159202-5220 | CONTROL LEVER |
18. | [1] | 159215-0300 | COILED SPRING |
20. | [1] | 159291-0620 | CONTROL LEVER |
22. | [1] | 139610-0700 | PACKING RING |
23/1. | [0] | 139410-3800 | SHIM D22&10.2T0.2 |
23/1. | [0] | 139410-3900 | SHIM D22&10.2T0.3 |
23/1. | [0] | 139410-4000 | SHIM D22&10.2T0.4 |
23/1. | [0] | 139410-4100 | SHIM D22&10.2T0.6 |
23/1. | [0] | 139410-4200 | SHIM D22&10.2T0.8 |
24. | [1] | 159215-4200 | COILED SPRING |
25. | [1] | 159235-5800 | CAP |
26. | [1] | 159290-3021 | CONTROL LEVER |
27. | [1] | 020006-1240 | BLEEDER SCREW |
35. | [1] | 159255-2220 | GOVERNOR COVER |
35/1. | [1] | 159301-6620 | GOVERNOR COVER |
35/2. | [1] | 159205-0400 | LEVER SHAFT |
35/3. | [2] | 159237-0200 | CAPSULE |
35/3. | [2] | 159237-0200 | CAPSULE |
35/4. | [1] | 159253-3820 | TENSIONING LEVER |
35/4/1. | [1] | 159253-3720 | TENSIONING LEVER |
35/4/2. | [1] | 159204-6022 | RACK |
35/4/3. | [1] | 159233-0300 | UNION NUT |
35/4/4. | [1] | 159234-0300 | FLAT-HEAD SCREW |
35/4/5. | [1] | 159216-0000 | COILED SPRING |
35/4/6. | [1] | 159216-0100 | COILED SPRING |
35/4/7. | [1] | 159216-0700 | COILED SPRING |
35/5. | [1] | 159203-6120 | GUIDE LEVER |
35/7. | [1] | 159215-1701 | COILED SPRING |
35/8. | [1] | 159231-1300 | BEARING PIN |
35/9. | [2] | 016010-0610 | LOCKING WASHER |
35/10. | [1] | 159238-2900 | BUSHING |
51. | [5] | 020106-3840 | BLEEDER SCREW |
51B. | [2] | 020106-4040 | BLEEDER SCREW |
65. | [1] | 155404-5700 | CAP |
100. | [1] | 154101-0420 | FLYWEIGHT ASSEMBLY |
101. | [1] | 025803-1610 | WOODRUFF KEY 16 MM |
102. | [1] | 029321-2020 | LOCKING WASHER |
103. | [1] | 029231-2030 | UNION NUT |
110. | [1] | 154123-2320 | SLIDING PIECE |
111/1. | [0] | 029311-0010 | SHIM D14&10.1T0.2 |
111/1. | [0] | 029311-0180 | SHIM D14&10.1T0.3 |
111/1. | [0] | 029311-0190 | SHIM D14&10.1T0.40 |
111/1. | [0] | 029311-0210 | SHIM D14&10.1T1 |
111/1. | [0] | 139410-0000 | SHIM D14&10.1T0.5 |
111/1. | [0] | 139410-0100 | SHIM D14&10.1T1.5 |
111/1. | [0] | 139410-3000 | SHIM D14&10.1T2.0 |
111/1. | [0] | 139410-3100 | SHIM D14&10.1T3.0 |
111/1. | [0] | 139410-3200 | SHIM D14&10.1T4.0 |
112. | [1] | 159236-0200 | TERMINAL STUD |
130. | [1] | 159210-8700 | GOVERNOR SPRING |
131. | [1] | 159211-5900 | GOVERNOR SPRING |
132. | [1] | 159214-0200 | COILED SPRING |
133. | [1] | 159219-1420 | SPRING PACK |
133/1. | [1] | 159234-5602 | GUIDE SLEEVE |
133/2. | [1] | 159212-5000 | COILED SPRING |
133/3. | [1] | 159219-1400 | COILED SPRING |
133/4/1. | [0] | 029310-9240 | SHIM D11.9&9T0.1 |
133/4/1. | [0] | 029310-9250 | SHIM D11.9&9T0.2 |
133/4/1. | [0] | 029310-9260 | SHIM D11.9&9T0.25 |
133/4/1. | [0] | 029310-9270 | SHIM D11.9&9T1.0 |
133/4/1. | [0] | 139409-0100 | SHIM D11.9&9T0.3 |
133/4/1. | [0] | 139409-0200 | SHIM D11.9&9T0.5 |
133/4/1. | [0] | 139409-0300 | SHIM D11.5&9T0.8 |
135. | [1] | 159248-2700 | FLAT-HEAD SCREW |
137. | [1] | 159237-5300 | CAPSULE |
140. | [1] | 159205-2101 | LEVER SHAFT |
145. | [1] | 159233-5700 | UNION NUT |
149. | [1] | 159237-5400 | CAPSULE |
150. | [1] | 159235-5300 | SLOTTED WASHER |
152. | [1] | 159235-6700 | SLOTTED WASHER |
155. | [1] | 159204-7420 | STRAP |
156. | [1] | 159233-0620 | BLEEDER SCREW |
158. | [1] | 013020-5240 | UNION NUT |
160. | [1] | 159252-2221 | LEVER GROUP |
160/1. | [1] | 159205-3711 | LEVER SHAFT |
160/2. | [1] | 159202-4810 | CONTROL LEVER |
160/3. | [1] | 029310-6030 | SHIM |
160/4. | [1] | 159202-4520 | CONTROL LEVER |
160/5. | [1] | 159202-2200 | CONTROL LEVER |
160/6. | [1] | 159215-2301 | COILED SPRING |
160/7. | [1] | 159215-3900 | COILED SPRING |
160/8. | [1] | 016010-0810 | LOCKING WASHER |
160/9. | [1] | 014020-6140 | PLAIN WASHER D11.5&6.5 |
160/10. | [1] | 016010-0610 | LOCKING WASHER |
160/11. | [1] | 016010-0810 | LOCKING WASHER |
168/1. | [0] | 029311-0640 | SHIM D26.0&10.2T0.95 |
168/1. | [0] | 029311-0650 | SHIM D26.0&10.2T0.20 |
168/1. | [0] | 029311-0660 | SHIM D26.0&10.2T0.25 |
168/1. | [0] | 029311-0670 | SHIM D26.0&10.2T0.30 |
168/1. | [0] | 029311-0680 | SHIM D26.0&10.2T0.35 |
168/1. | [0] | 029311-0690 | SHIM D26.0&10.2T0.40 |
168/1. | [0] | 029311-0700 | SHIM D26.0&10.2T0.50 |
168/1. | [0] | 139410-1400 | SHIM D26&10.2T0.7 |
168/1. | [0] | 139410-1500 | SHIM D26&10.2T0.9 |
168/1. | [0] | 139410-1600 | SHIM D26&10.2T0.8 |
168/1. | [0] | 139410-2700 | SHIM D26&10.2T0.6 |
169. | [1] | 159238-4300 | SHIM |
170. | [1] | 159266-3020 | CONTROL LEVER |
172. | [1] | 159233-7200 | UNION NUT |
173/1. | [1] | 139006-3500 | BLEEDER SCREW M6P1.0L33 |
173/1. | [1] | 139006-3700 | BLEEDER SCREW M6P1.0L34 |
173/1. | [1] | 139006-3800 | BLEEDER SCREW M6P1.0L35 |
173/1. | [1] | 139006-3900 | BLEEDER SCREW M6P1.0L36 |
173/1. | [1] | 139006-5300 | BLEEDER SCREW M6P1.0L31 |
173/1. | [1] | 139006-5400 | BLEEDER SCREW M6P1.0L32 |
173/1. | [1] | 155615-2500 | BLEEDER SCREW M6P1.0L37 |
174. | [1] | 154010-8100 | BLEEDER SCREW |
175. | [1] | 154010-8100 | BLEEDER SCREW |
176. | [1] | 159225-8600 | UNION NUT |
177. | [1] | 154011-2300 | UNION NUT |
177B. | [1] | 154011-2800 | UNION NUT |
178. | [1] | 159263-6400 | CONTROL LEVER |
179. | [1] | 159215-6900 | COILED SPRING |
180. | [1] | 016010-0840 | LOCKING WASHER |
181. | [2] | 020104-2540 | BLEEDER SCREW |
236. | [1] | 154390-1300 | GASKET |
237. | [1] | 159238-3100 | GASKET |
250. | [1] | 159221-2920 | BRACKET |
251. | [2] | 154317-8800 | COILED SPRING |
253. | [1] | 159248-0401 | BLEEDER SCREW |
257. | [2] | 154156-0900 | TUBE |
300. | [1] | 159289-2300 | CAM PLATE |
301. | [1] | 016010-0840 | LOCKING WASHER |
303. | [1] | 016010-0540 | LOCKING WASHER |
311. | [1] | 159237-0200 | CAPSULE |
320. | [1] | 154420-2721 | MANIFOLD-PRESSURE COMP. |
320/1. | [1] | 154408-9620 | DIAPHRAGM HOUSING |
320/1A. | [1] | 154418-3900 | SPACER BUSHING |
320/2. | [1] | 020106-2240 | BLEEDER SCREW |
320/2B. | [1] | 020106-2540 | BLEEDER SCREW |
320/2C. | [1] | 020106-2840 | BLEEDER SCREW |
320/3. | [1] | 020118-3040 | BLEEDER SCREW |
320/5. | [1] | 159275-1400 | COILED SPRING |
320/6/1. | [1] | 159274-0120 | STOP PIN L125 |
320/6/1. | [1] | 159274-0220 | STOP PIN L127.50 |
320/6/1. | [1] | 159274-0320 | STOP PIN L128.00 |
320/6/1. | [1] | 159274-0420 | STOP PIN L127.00 |
320/6/1. | [1] | 159274-0520 | STOP PIN L126.00 |
320/6/1. | [1] | 159274-0620 | STOP PIN L129.00 |
320/6/1. | [1] | 159274-0720 | STOP PIN L128.50 |
320/6/1. | [1] | 159274-0820 | STOP PIN L125.50 |
320/6/1. | [1] | 159274-0920 | STOP PIN L126.50 |
320/6/1. | [1] | 159274-1120 | STOP PIN L119.5 |
320/6/1. | [1] | 159274-1220 | STOP PIN L120 |
320/6/1. | [1] | 159274-1320 | STOP PIN L120.5 |
320/6/1. | [1] | 159274-1420 | STOP PIN L121 |
320/6/1. | [1] | 159274-1520 | STOP PIN L121.5 |
320/6/1. | [1] | 159274-1620 | STOP PIN L122 |
320/6/1. | [1] | 159274-1720 | STOP PIN L122.5 |
320/6/1. | [1] | 159274-1820 | STOP PIN L123 |
320/6/1. | [1] | 159274-1920 | STOP PIN L123.5 |
320/6/1. | [1] | 159274-4220 | STOP PIN L129.5 |
320/6/1. | [1] | 159274-4320 | STOP PIN L130 |
320/6/1. | [1] | 159274-4420 | STOP PIN L130.5 |
320/6/1. | [1] | 159274-4520 | STOP PIN L131 |
320/6/1. | [1] | 159274-4620 | STOP PIN L131.5 |
320/6/1. | [1] | 159274-4720 | STOP PIN L132 |
320/6/1. | [1] | 159274-4820 | STOP PIN L132.5 |
320/6/1. | [1] | 159274-4920 | STOP PIN L133 |
320/6/1. | [1] | 159274-5020 | STOP PIN L133.5 |
320/11. | [1] | 154400-8521 | DIAPHRAGM |
320/12. | [1] | 154413-1400 | BUSHING |
320/14. | [1] | 154406-5500 | SLOTTED WASHER |
320/15. | [1] | 013030-6040 | UNION NUT |
320/16. | [1] | 154416-9800 | COILED SPRING |
320/17. | [2] | 154413-2600 | GASKET |
320/18. | [1] | 154404-5000 | COVER |
320/19. | [1] | 020106-2040 | BLEEDER SCREW |
320/20. | [2] | 139006-7000 | BLEEDER SCREW |
320/21. | [2] | 014110-6440 | LOCKING WASHER D12.2&6.1T1.5 |
320/24. | [3] | 020106-2240 | BLEEDER SCREW |
320/25. | [1] | 139006-1300 | BLEEDER SCREW |
320/26. | [1] | 029320-6010 | LOCKING WASHER |
320/27. | [1] | 029731-0180 | EYE BOLT |
320/28. | [2] | 139510-0200 | GASKET |
320/29. | [1] | 154413-2800 | GASKET |
320/40. | [1] | 154412-7920 | JOINT CONNECTION |
320/43. | [1] | 159226-4500 | SPACER RING |
320/44. | [1] | 014010-5140 | PLAIN WASHER |
320/45. | [1] | 139518-0000 | GASKET |
320/46. | [1] | 154406-5800 | FLAT-HEAD SCREW |
320/47. | [1] | 014110-6440 | LOCKING WASHER D12.2&6.1T1.5 |
320/54. | [1] | 013030-6040 | UNION NUT |
320/55. | [1] | 154404-4800 | FLAT-HEAD SCREW |
320/61. | [1] | 154035-1600 | CAP NUT |
320/62. | [1] | 154404-4400 | FLAT-HEAD SCREW |
320/63. | [1] | 013030-6040 | UNION NUT |
320/64. | [2] | 139506-0300 | GASKET |
350. | [1] | 159221-3020 | BRACKET |
360. | [1] | 159229-8024 | ADJUSTING DEVICE |
361. | [2] | 020146-1240 | BLEEDER SCREW |
370. | [1] | 159221-3100 | BRACKET |
371. | [1] | 159248-0200 | BLEEDER SCREW |
372. | [1] | 020106-1040 | BLEEDER SCREW M6P1.0L12 |
373. | [1] | 154604-0800 | CLAMPING BAND |
374. | [1] | 012154-0840 | FLAT-HEAD SCREW |
375. | [1] | 014010-4140 | PLAIN WASHER |
376. | [1] | 154614-4520 | CLAMPING BAND |
550. | [1] | 153146-5320 | SWITCH |
835S. | [1] | 154062-1900 | CAP |
836S. | [1] | 154062-1700 | CAP |
Include in #1:
101401-4952
as GOVERNOR
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Table 1
S O S Oil Sampling Interval for Engine crankcase
Recommended Interval (1)(2) Oil Type
Every 250 Service Hours Cat DEO
Cat DEO-ULS
(1) Severe applications may require a more frequent oil sampling interval.
(2) Under certain conditions, the Cat dealer or the Operation and Maintenance Manual may allow a longer interval between oil samplings.Note: Refer to the Operation and Maintenance Manual for your engine for recommended oil drain intervals.Consult your Cat dealer for complete information and assistance in order to establish an S O S Services program for your engine.More Frequent S O S Sampling Improves Life Cycle Management
Traditionally, the suggested S O S sampling intervals for diesel engines have been at 250 hours. However in severe applications, more frequent oil sampling is recommended. Severe service for lubricated compartments occurs at high loads, in high temperatures, and in dusty conditions. If any of these conditions or other severe service indicators exist, sample the engine oil at 125 hour intervals. These additional samples will increase the chance of detecting a potential failure.Determining Optimum Oil Change Intervals
Sampling the engine oil at every 125 hours provides information for oil condition and for oil performance. This information is used to determine the optimum usable life of a particular oil. Also, more points of data will allow closer monitoring of component wear rates. Close monitoring also allows you to obtain the maximum use of the oil. For detailed information on optimizing oil change intervals, consult your Cat dealer.This Special Publication does not address recommended oil drain intervals. Refer to your engine Operation and Maintenance Manual, and consult your Cat dealer for additional guidance, including but not limited to guidance on establishing optimized and/or acceptable oil drain intervals.To reduce the potential risk of failures associated with extended oil drain periods, Caterpillar recommends that oil drain intervals only be extended based on oil analysis, and subsequent system inspections. Oil analysis alone does not provide an indication of the rate of formation of lacquer, varnish and/or other deposits on surfaces. The only accurate way to evaluate specific oil performance in a specific system using extended oil drain periods is to observe the effects on the system components. Making these observations involves tear-down inspections of systems that have run to the normal overhaul period while using extended oil drain intervals. Following this recommendation will help ensure that excessive component wear does not take place in a given application.Note: The use of Cat S O S Services oil analysis helps environmental sustainability as the best way to optimize oil life. S O S Services will help engines reach expected life. Consult your Cat dealer regarding the testing required to establish a safe, optimized oil drain interval.Standard oil drain intervals as published in engine Operation and Maintenance Manual are for typical applications:
Using recommended oils
Using good fuel
Using recommended filters
Using industry standard good maintenance practices
Following maintenance intervals as published in engine Operation and Maintenance ManualMore severe applications may require shortened oil drain intervals, while less severe applications may allow for longer than standard oil drain intervals. High