105931-9470 ZEXEL GOVERNOR Cross 1059319470


 

Information governor

ZEXEL 105931-9470 1059319470
105931-9470 GOVERNOR
Rating:
31
Buy GOVERNOR 105931-9470 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105931-9470 
 
   
GOVERNOR




Information:

Start By:a. remove valve cover 1. Remove four bolts (1) that hold each rocker arm assembly in position. Remove the rocker arm assemblies from the engine.2. Put identification marks on all push rods as to their location in the engine. Remove the push rods from the engine. 3. Disassemble the rocker arm assemblies as follows: a. Remove the pin and rocker arm mounts (2). Remove the two rocker arm assemblies and the unit injector arm assembly from the shaft assembly.b. Remove the nut and valve adjusting screw (3) from each rocker arm.c. Remove arm button (7), retaining ring (6) and the arm socket from the unit injector arm.d. Loosen the nut, and remove injection adjusting screw (4) from the unit injector arm.e. Remove sleeve bearing (5) from the unit injector arm. The following steps are for the installation of the rocker arm assemblies and push rods.4. Be sure all parts of the rocker arm assemblies are clean.5. Assemble the rocker arm assemblies as follows: a. Install sleeve bearing (5) in the unit injector arm with Tool (A).b. Install injection adjusting screw (4) and the nut in the unit injector arm.c. Install the arm socket, retaining ring (6) and arm button (7) in the unit injector arm.d. Install valve adjusting screw (3) and the nut in each rocker arm.e. Put the rocker arm assemblies and the unit injector arm assembly in position on the shaft assembly. Install two rocker arm mounts (2) and the pins that hold them.6. Apply clean engine oil to the push rods, and install them in their original locations in the engine. Be sure the push rods are seated in the lifter arm assemblies.7. Loosen all adjusting screws in the rocker arm assemblies. Position the rocker arm assemblies on the cylinder head assembly, and install bolts (1) that hold them in position.8. Adjust the fuel timing and the valve lash. See the topics "Fuel Timing" & "Valve Lash" in the 3114 & 3116 Diesel truck Engines Systems Operation & Testing & Adjusting module, Form No. SENR6437.End By:a. install valve cover

Have questions with 105931-9470?





Group cross 105931-9470 ZEXEL

Mitsubishi 

F 019 Z5E 814 
NP-EP/RLD275-1550A1FFL 
ME740319 
GOVERNOR
 
ME731737 
GOVERNOR
9 420 612 244 
NP-EP/RLD275-1550A1CFL 
ME730896 
GOVERNOR
F 019 Z9E 962 
ME730906 
GOVERNOR
F 019 Z9E 963 
ME731689 
GOVERNOR
9 420 613 642 
NP-EP/RLD275-1550A1EFL 
ME731543 
GOVERNOR
 
ME730907 
GOVERNOR
F 019 Z9E 964 
ME731647 
GOVERNOR
F 019 Z9E 965 
ME731690 
GOVERNOR
9 420 612 195 
ME731541 
GOVERNOR
F 019 Z5E 815 
NP-EP/RLD275-1550A1FFL 
ME738749 
GOVERNOR
F 019 Z9E 966 
 
GOVERNOR

Mitsubishi 

F 019 Z9E 967 
ME731738 
GOVERNOR
F 019 Z9E 968 
ME731691 
GOVERNOR
9 420 612 196 
ME731542 
GOVERNOR
F 019 Z5E 816 
NP-EP/RLD275-1550A1FFL 
ME738750 
GOVERNOR
 
ME730900 
GOVERNOR
 
 
GOVERNOR

Mitsubishi 

 
ME730902 
GOVERNOR
F 019 Z5E 817 
NP-EP/RLD275-1550A1EFL 
ME731526 
GOVERNOR
105931-9470  
 
 
GOVERNOR

Isuzu 

9 420 613 932 
8970788771 
GOVERNOR
F 019 Z1F 007 
8970811830 
GOVERNOR
9 420 612 686 
8970811831 
GOVERNOR
F 019 Z1E 247 
8970811832 
GOVERNOR
9 420 613 933 
8970832600 
GOVERNOR
 
8970894410 
GOVERNOR
9 420 612 687 
8970937620 
GOVERNOR
9 420 612 688 
 
GOVERNOR

Isuzu 

F 019 Z4E 090 
NP-EP/RLD275-1750A2FFL 
8970937621 
GOVERNOR
Back to top