105542-6700 ZEXEL 9 420 610 104 BOSCH GOVERNOR 9420610104 1055426700 5157202550

Information governor

BOSCH 9 420 610 104 9420610104

ZEXEL 105542-6700 1055426700

ISUZU 5157202550 5157202550

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy GOVERNOR 105542-6700 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	155014-7320	GOVERNOR HOUSING
1/1.	[1]	155000-9110	GOVERNOR HOUSING
1/2.	[2]	026506-1040	GASKET
1/2.	[2]	026506-1040	GASKET
1/3.	[2]	029010-6010	CAPSULE
1/3.	[2]	029010-6010	CAPSULE
1/4.	[1]	155052-7600	BUSHING
1/5.	[1]	155005-0800	COILED SPRING
1/6.	[1]	155003-1000	CONTROL LEVER
1/7.	[1]	155003-1100	CONTROL LEVER
1/8.	[1]	029320-6010	LOCKING WASHER
1/9.	[1]	155411-8100	FLAT-HEAD SCREW
1/10.	[1]	155004-2200	LEVER SHAFT
1/11.	[2]	029630-8060	O-RING
1/11.	[2]	029630-8060	O-RING
1/12.	[2]	029300-8010	PLAIN WASHER
1/12.	[2]	029300-8010	PLAIN WASHER
1/13.	[0]	029310-8010	PLAIN WASHER D15&8.4T0.2
1/13.	[0]	029310-8020	PLAIN WASHER D15&8.4T0.3
1/14.	[1]	025520-1210	SPLIT PIN
1/15.	[1]	155052-7600	BUSHING
1/16.	[1]	155005-0900	COILED SPRING
1/17.	[1]	155006-0300	BLEEDER SCREW
1/18.	[1]	029620-5010	PACKING RING
1/19.	[1]	025802-1010	WOODRUFF KEY
1/20.	[1]	155007-0520	HEADLESS SCREW
1/21.	[1]	029241-0060	UNION NUT
2.	[1]	154007-0200	ADAPTOR
3.	[1]	020018-1840	BLEEDER SCREW
4.	[4]	029010-6810	BLEEDER SCREW
5.	[1]	153406-0400	BLEEDER SCREW
6.	[1]	014110-5440	LOCKING WASHER
7.	[1]	013020-5240	UNION NUT
8.	[1]	023500-6210	PLAIN WASHER
9.	[1]	025520-1210	SPLIT PIN
10.	[1]	155020-8420	DIAPHRAGM
11.	[1]	155031-5300	GOVERNOR SPRING
12/1.	[0]	155407-1100	SHIM D37&30.5T0.5
12/1.	[0]	155407-1200	SHIM D37&30.5T1.0
12/1.	[0]	155407-1300	SHIM D37&30.5T1.5
12/1.	[0]	155407-1400	SHIM D37&30.5T2.0
12/1.	[0]	155407-1500	SHIM D37&30.5T2.5
12/1.	[0]	155407-1600	SHIM D37&30.5T3.0
12/1.	[0]	155407-1700	SHIM D37&30.5T0.2
12/1.	[0]	155407-1800	SHIM D37&30.5T0.3
13.	[1]	155240-0500	COVER
15.	[3]	020105-1640	BLEEDER SCREW
16.	[1]	029010-5350	BLEEDER SCREW
18.	[1]	155241-1220	HEADLESS SCREW
21.	[1]	155245-0100	HEXAGON NUT
23.	[1]	029142-0010	CAPSULE
26.	[1]	029721-2050	JOINT CONNECTION
27.	[1]	155616-3020	JOINT CONNECTION
31.	[1]	155400-6720	CONTROL LEVER
33.	[1]	155402-2800	PLATE
34.	[2]	029050-5040	FLAT-HEAD SCREW
40.	[1]	155404-0200	CAP
100.	[1]	155412-5300	IMPELLER WHEEL
110.	[1]	029300-5010	PLAIN WASHER
111/1.	[0]	155411-0200	STOP PIN L51
111/1.	[0]	155411-0300	STOP PIN L51.5
111/1.	[0]	155411-0400	STOP PIN L52
111/1.	[0]	155411-7800	STOP PIN L48.5
111/1.	[0]	155411-7900	STOP PIN L49.5
111/1.	[0]	155411-8000	STOP PIN L50.5
111/1.	[0]	155411-9700	STOP PIN L48
111/1.	[0]	155411-9800	STOP PIN L49
111/1.	[0]	155411-9900	STOP PIN L50
112.	[1]	155411-8200	COILED SPRING
119.	[1]	025803-1610	WOODRUFF KEY 16 MM
120.	[1]	154102-0620	FLYWEIGHT ASSEMBLY
121.	[1]	029321-2020	LOCKING WASHER
122.	[1]	029231-2030	UNION NUT
123.	[1]	154123-0800	SLIDING PIECE
125.	[1]	154405-4720	COVER
125/2.	[1]	154406-2000	FORK LINK
125/3.	[1]	154406-0500	BEARING PIN
125/4.	[2]	029050-8050	FLAT-HEAD SCREW
125/4.	[2]	029050-8050	FLAT-HEAD SCREW
126.	[1]	154406-0200	SLOTTED WASHER
127.	[0]	029302-5000	SHIM D30&25T0.5
127B.	[0]	029302-5010	SHIM D30&25T1
128.	[1]	155031-7100	GOVERNOR SPRING
128B.	[1]	155032-6600	COILED SPRING
129.	[1]	154406-0900	SLOTTED WASHER
130.	[1]	154406-1000	FLAT-HEAD SCREW
131.	[1]	016010-0740	LOCKING WASHER
133.	[1]	154011-0400	UNION NUT
134.	[1]	026508-1240	GASKET D11.9&8.2T1.0
135.	[1]	154035-0900	CAP NUT
136.	[5]	029000-6810	BLEEDER SCREW
140.	[1]	154390-0000	GASKET
143.	[1]	154390-1000	GASKET

Include in #1:

101431-0190 as GOVERNOR

Cross reference number

Zexel num

Bosch num

Firm num

Name

105542-6700

9 420 610 104
NP-EP/RBD1450AZ3/CLN15

5157202550 ISUZU

GOVERNOR
* K 14JP COMBINED GOVERNOR GOV RBD GOV

105542-6700

9 420 610 104
NP-EP/RBD1450AZ3/CLN15

5157200740 ISUZU

GOVERNOR
A * K 14JP COMBINED GOVERNOR GOV RBD GOV

Information:

Ejector Guide Rollers
(631 & 637)
Adjust
1. The ejector should operate freely without binding. To adjust the guide rollers, loosen the roller shaft clamping bolt. 2. Turn the roller (eccentric) shaft to position the roller. 3. Tighten the clamping bolt. Clearance between the guide rollers and the scraper bowl should be 3.00 to 20.00 mm (.118 to .787 in).Ejector Carrier Rollers
(631 & 637)
Adjust
1. The ejector should operate freely without dragging. To adjust the carrier rollers, loosen the clamping bolt. 2. Turn the roller (eccentric) shaft to position the roller.3. Tighten the clamping bolt. Clearance between the bottom of the ejector and the bottom of the bowl should be 1.0 to 13.0 mm (.04 to .50 in).Ejector Support Rollers
(631 & 637)
Adjust
1. The ejector should operate freely without dragging. To adjust the carrier rollers, loosen the clamping bolt. 2. Turn the roller (eccentric) shaft to position the roller. 3. Tighten the clamping bolt. The distance between rollers, outside to outside, should be .00 to 6.00 mm (.00 to .236 in) less than the narrowest dimension between the roller guide tracks.Refer to the Service Manual for your machine or contact your Caterpillar dealer for the correct adjustment procedure.Ejector Carriage Rollers
(639)
Adjust
Do not get under the push frame unless the front engine is stopped and the ejector floor is blocked.
1. Install pin in the position that will block movement of the carriage.See "Blocking the Ejector Floor Closed" in the "Safety" section of the Operation (Operator's) Guide. 2. The carriage should operate freely without binding. To adjust the carriage rollers, loosen the roller shaft clamping bolt. 3. Turn the roller (eccentric) shaft to position the rollers. 4. Tighten the clamping bolt. The distance between rollers, outside to outside, should be .00 to 1.50 mm (.00 to .060 in) less than the narrowest dimension between the guide tracks on the push frame.