105540-6230 ZEXEL GOVERNOR Cross 1055406230 9813105040


 

Information governor

ZEXEL 105540-6230 1055406230
ISUZU 9813105040 9813105040
105540-6230 GOVERNOR
Rating:
68
Buy GOVERNOR 105540-6230 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105540-6230 
 
9813105040  ISUZU
GOVERNOR
*




Information:


Operations that may cause product damage are identified by notice labels in this publication.
Introduction
This Tool Operating Manual contains two filter installation procedures. This first procedure is for installing a primary filter system. This is a coarse filter and will protect the transfer pump from contamination in the oil. The second procedure outlines installing a secondary filter which is designed to protect injection pumps from contaminated oil. Fuel injection pumps used on the 3208 Engine are one example of a fuel injection pump that requires the secondary filter installation.It will be the dealer choice as to which optional filter is installed on the test stand. Determine what type of filtering will be required most often, and install the appropriate type of filtering system. These filters can only be added to the 15 horsepower test stands.Secondary Filter
Nomenclature
Illustration 1. Nomenclature for Secondary Filter Installation. Refer to Chart A for item identification. Fabricated Parts
All the parts required for this installation can be ordered from Caterpillar Parts Distribution, except bracket (1). This must be manufactured by the bench owner, using the dimensions provided below.This bracket can be made from common SAE1018 steel. Weld the two pieces together.
Illustration 2. Filter Mounting Bracket. Refer to Chart B for dimensions. Installation
Assemble the Fuel Filter
1. Install 053-0088 Fitting (17) with 3J-1907 Seal (18) into the inlet port (left side) of the filter base. (This converts a number 6 STOP port to NPT). Install 5P-4455 Fitting (19) into fitting (17).2. Install 2R-6806 Fitting (15) with 3J-1907 Seal (16) into the outlet port (right side) of the filter base.3. Install 6N-4414 Cover (7) onto the filter base using 1P-0436 Gasket (8), 4B-3388/6V-2317 (9), and OS-1616/6V-8490 Bolt (10).4. Install 9S-4182 Plug (5) with 6V-5084 O-ring Seal (6) into the top of the filter base.5. Install the filter base assembly onto filter bracket (1),

Have questions with 105540-6230?





Group cross 105540-6230 ZEXEL

Isuzu 

 
9813105070 
GOVERNOR
 
9813105090 

 
9813105060 
GOVERNOR
105540-6230  
 
9813105040 
GOVERNOR
 
9813105140 
GOVERNOR
 
9813101560 

Nissan-Diesel 

 
1910195010 

Isuzu 

9 420 610 018 
NP-EP/RBD1250L1N29 
1157100012 
GOVERNOR
Back to top