105488-0440 ZEXEL GOVERNOR Cross 1054880440 1157208260

Illustration 4 g01784824
Right side view of machine (A) Hood and guard group (B) Lines group (Air) (C) Air cleaner
Illustration 5 g01784914
Front view of machineInstallation Procedure
The installation procedure that follows is specific for the listed machine.Diesel Particulate Filter Installation
Illustration 6 g01784177
(2) 331-8935 Bracket (12) 5P-8245 Hard Washer (13) 6V-8149 Nut (14) 8F-6437 Washer (15) 8T-4956 Bolt
Place two new 331-8935 Brackets (2) parallel to each other on top of the hood. Secure the brackets by using four new 8F-6437 Washers (14), four new 5P-8245 Hard Washers (12), four new 6V-8149 Nuts (13) and four new 8T-4956 Bolts (15). Refer to Illustration 6.
Illustration 7 g01784193
(5) 295-3044 Exhaust Support Gp (Lower half) (14) 8F-6437 Washer (15) 8T-4956 Bolt
Install the two lower halves of the new 295-3044 Exhaust Support Gp (5) onto two brackets (2) using four new 8F-6437 Washers (14) and four new 8T-4956 Bolts (15). Refer to Illustration 7.
Illustration 8 g01784213
(1) 331-8928 Diesel Particulate Filter Gp (5a) Clamp As (Upper half) (5b) Bolts (5c) Hard Washers (5d) Weld Nuts
Place 331-8928 Diesel Particulate Filter Gp (1) onto the two lower halves of exhaust support group (5). The weight of the diesel particulate filter group is approximately 43.6 kg (96.1 lb). Refer to Illustration 8.
Install the two upper clamp assemblies (5a) onto the two lower halves of exhaust support group (5) by using four hard washers (5c), four weld nuts (5d) and four bolts (5b). Refer to Illustration 8.
Illustration 9 g01784214
(9) 174-5414 Clamp (11) 255-2899 Tail Pipe As
Install the new 255-2899 Tail Pipe As (11) to the outlet module tube of the diesel particulate filter group. Refer to Illustration 9.
Secure tail pipe assembly (11) to the outlet module tube of diesel particulate filter group by using a new 174-5414 Clamp (9). Refer to Illustration 9.
Illustration 10 g01784215
(3) 331-9047 Filter Tube As (7) 241-6170 Plug (8) 8T-6765 Pipe Plug (10) 209-4589 Clamp
Install the new 331-9047 Filter Tube As (3) to the inlet module tube of the diesel particulate filter group. Refer to Illustration 10.
Secure filter tube assembly (3) to the inlet module tube of the diesel particulate filter group by using one new 209-4589 Clamp (10). Refer to Illustration 10.
Install the new 241-6170 Plug (7) and 8T-6765 Pipe Plug (8) onto the bosses that are provided on filter tube assembly (3). Refer to Illustration 10.
Illustration 11 g01784216
(6) 270-0112 Bellows (10) 209-4589 Clamp
Install the new 270-0112 Bellows (6) to filter tube assembly (3). Refer to Illustration 11.
Secure bellows (6) to filter tube assembly (3) by using one new 209-4589 Clamp (10). Refer to Illustration 11.
Illustration 12 g01784217
(4) 331-8934 Filter Tube (10) 209-4589 Clamp
Install the new 331-8934 Filter Tube (4) into bellows (6). Refer to Illustration 12.
Secure filter tube (4) to bellows (6) by using one new 209-4589 Clamp (10). Refer to Illustration 12.
Connect