Information governor
BOSCH
9 420 611 016
9420611016
ZEXEL
105487-6930
1054876930
MITSUBISHI
ME740427
me740427

Rating:
Scheme ###:
1. | [1] | 154004-0100 | GOVERNOR HOUSING |
4. | [1] | 154365-2220 | CONTROL LEVER |
4. | [1] | 154365-2220 | CONTROL LEVER |
4/1. | [1] | 154304-6200 | CONTROL LEVER |
4/2. | [1] | 154352-2000 | BLEEDER SCREW |
4/3. | [1] | 154365-2200 | CONTROL LEVER |
4/4. | [1] | 029311-0230 | SHIM D18&10.3T0.5 |
4/5. | [1] | 154321-1500 | BUSHING |
4/6. | [1] | 154327-6701 | COILED SPRING |
4/7. | [1] | 154322-0100 | CAP |
4/8. | [1] | 029311-0220 | SHIM D18&10.3T0.2 |
4/9. | [1] | 154324-2700 | LEVER SHAFT |
4/10. | [1] | 029631-0030 | O-RING &9.8W2.3 |
4/11. | [1] | 020006-1240 | BLEEDER SCREW M6P1L12 4T |
9. | [1] | 154350-6000 | PLATE |
10. | [4] | 020106-2040 | BLEEDER SCREW M6P1L20 |
11. | [4] | 020106-1840 | BLEEDER SCREW M6P1L18 |
12. | [1] | 154013-0600 | BLEEDER SCREW |
13. | [1] | 013020-6040 | UNION NUT M6P1H5 |
14. | [1] | 013020-8040 | UNION NUT M8P1.25H7 |
14B. | [1] | 154011-2300 | UNION NUT |
35. | [1] | 154513-1020 | GOVERNOR COVER |
35/2. | [1] | 154321-2000 | BUSHING |
35/3. | [1] | 029621-0080 | PACKING RING |
38. | [1] | 154031-3401 | FLAT-HEAD SCREW |
39. | [1] | 029201-0160 | UNION NUT |
47. | [1] | 154036-1900 | CAPSULE |
47B. | [1] | 154036-1800 | CAPSULE |
48. | [1] | 154010-6000 | BLEEDER SCREW M10P1.25L55 |
48B. | [1] | 154010-7900 | BLEEDER SCREW M10P1.25L58 |
49. | [1] | 154011-2200 | UNION NUT |
50. | [1] | 155615-1900 | BLEEDER SCREW |
51. | [5] | 020106-4540 | BLEEDER SCREW M6P1.0L45 |
52. | [1] | 010006-6040 | BLEEDER SCREW |
52B. | [1] | 029010-6850 | BLEEDER SCREW |
53. | [1] | 154010-7400 | BLEEDER SCREW M8P1.25L55 |
54. | [2] | 014110-6440 | LOCKING WASHER |
54. | [2] | 014110-6440 | LOCKING WASHER |
65. | [1] | 153020-4320 | STOPPING DEVICE |
66. | [1] | 026524-3040 | GASKET |
80. | [1] | 154063-6521 | COVER |
82. | [1] | 020006-1640 | BLEEDER SCREW M6P1L16 4T |
83. | [1] | 029020-6210 | BLEEDER SCREW |
84. | [1] | 020006-1640 | BLEEDER SCREW M6P1L16 4T |
86. | [1] | 029020-6210 | BLEEDER SCREW |
100. | [1] | 154100-9220 | FLYWEIGHT ASSEMBLY |
101. | [1] | 025803-1310 | WOODRUFF KEY |
102. | [1] | 029321-2020 | LOCKING WASHER |
103. | [1] | 139212-0000 | UNION NUT |
117. | [1] | 154123-2320 | SLIDING PIECE |
118/1. | [0] | 029311-0010 | SHIM D14&10.1T0.2 |
118/1. | [0] | 029311-0180 | SHIM D14&10.1T0.3 |
118/1. | [0] | 029311-0190 | SHIM D14&10.1T0.40 |
118/1. | [0] | 029311-0210 | SHIM D14&10.1T1 |
118/1. | [0] | 139410-0000 | SHIM D14.0&10.1T0.5 |
118/1. | [0] | 139410-0100 | SHIM D14.0&10.1T1.5 |
118/1. | [0] | 139410-3000 | SHIM D14&10.1T2.0 |
118/1. | [0] | 139410-3100 | SHIM D14&10.1T3.0 |
118/1. | [0] | 139410-3200 | SHIM D14&10.1T4.0 |
130. | [1] | 154150-9400 | GOVERNOR SPRING |
132. | [1] | 154154-0200 | COILED SPRING |
140. | [1] | 154183-5820 | HEADLESS SCREW |
141. | [1] | 139218-0100 | UNION NUT |
150. | [1] | 154200-5601 | SWIVELLING LEVER |
151. | [1] | 154200-5501 | BUSHING |
152. | [2] | 139700-0000 | O-RING |
152. | [2] | 139700-0000 | O-RING |
153. | [2] | 154354-3900 | LOCKING WASHER |
153. | [2] | 154354-3900 | LOCKING WASHER |
154. | [1] | 139610-0101 | PACKING RING |
155. | [1] | 139411-0100 | SHIM D22.0&12.0T0.40 |
156. | [0] | 139411-0200 | SHIM D18.0&12.0T0.10 |
156B. | [0] | 139411-0300 | SHIM D18.0&12.0T0.20 |
156C. | [0] | 139411-0400 | SHIM D18.0&12.0T0.30 |
157. | [1] | 154204-3500 | BUSHING |
159. | [1] | 025803-1310 | WOODRUFF KEY |
160. | [1] | 154206-2300 | BUSHING |
161. | [0] | 154206-2400 | PLAIN WASHER D20.5&12.2T1 |
170. | [1] | 154216-1820 | FORK LEVER |
173. | [1] | 016010-0540 | LOCKING WASHER |
174. | [1] | 154230-6620 | STRAP |
179. | [1] | 154238-0201 | BEARING PIN |
180. | [1] | 016010-0540 | LOCKING WASHER |
181. | [1] | 154236-5200 | TENSIONING LEVER |
182. | [1] | 154237-1200 | BEARING PIN |
183. | [2] | 154237-1300 | BUSHING |
190. | [1] | 154360-2700 | CONTROL LEVER |
191. | [1] | 154395-5820 | CONTROL LEVER |
192. | [1] | 020006-1670 | BLEEDER SCREW M6P1L16 7T |
193. | [1] | 154368-5620 | CONTROL LEVER |
194. | [2] | 020006-1240 | BLEEDER SCREW M6P1L12 4T |
203/1. | [0] | 029311-0640 | SHIM D26.0&10.2T0.95 |
203/1. | [0] | 029311-0650 | SHIM D26.0&10.2T0.20 |
203/1. | [0] | 029311-0660 | SHIM D26.0&10.2T0.25 |
203/1. | [0] | 029311-0670 | SHIM D26.0&10.2T0.30 |
203/1. | [0] | 029311-0680 | SHIM D26.0&10.2T0.35 |
203/1. | [0] | 029311-0690 | SHIM D26.0&10.2T0.40 |
203/1. | [0] | 029311-0700 | SHIM D26.0&10.2T0.50 |
203/1. | [0] | 139410-1400 | SHIM D26&10.2T0.7 |
203/1. | [0] | 139410-1500 | SHIM D26&10.2T0.9 |
203/1. | [0] | 139410-1600 | SHIM D26&10.2T0.8 |
203/1. | [0] | 139410-2700 | SHIM D26&10.2T0.6 |
205. | [1] | 154324-3400 | LEVER SHAFT |
207. | [1] | 154326-0300 | CONTROL LEVER |
211. | [1] | 016010-0840 | LOCKING WASHER |
220. | [1] | 154050-3520 | HEADLESS SCREW |
221. | [1] | 029201-2130 | UNION NUT M12P1.0H6 |
222. | [2] | 026512-1540 | GASKET D15.4&12.2T1.50 |
223. | [1] | 154159-0100 | CAP NUT |
235. | [1] | 155412-5200 | IMPELLER WHEEL |
236. | [1] | 154371-5600 | GASKET |
237. | [1] | 154390-0200 | GASKET |
238. | [1] | 139700-0100 | O-RING |
248. | [1] | 154357-9720 | BRACKET |
251. | [1] | 010065-1240 | BLEEDER SCREW M5P0.8L12 |
252. | [1] | 014110-5440 | LOCKING WASHER |
257. | [2] | 026512-1840 | GASKET D17.9&12.2T1.50 |
258. | [1] | 153556-4800 | EYE BOLT |
350. | [1] | 154372-7920 | CONTROL LEVER |
351. | [2] | 014011-0140 | PLAIN WASHER D22&10.5T1.6 |
352. | [1] | 015320-1540 | SPLIT PIN |
353. | [1] | 154351-9200 | UNION NUT M6P1H40 |
353B. | [1] | 154354-3800 | UNION NUT M6P1H30 |
354. | [1] | 154373-2700 | CLEVIS |
355. | [1] | 013020-6040 | UNION NUT M6P1H5 |
356. | [1] | 154373-2800 | CLEVIS |
357. | [1] | 029200-6210 | UNION NUT |
358. | [2] | 154373-2900 | BEARING PIN |
358. | [2] | 154373-2900 | BEARING PIN |
360. | [2] | 016010-0640 | LOCKING WASHER |
360. | [2] | 016010-0640 | LOCKING WASHER |
361. | [1] | 154375-4920 | BRACKET |
361B. | [1] | 139316-0100 | PLAIN WASHER |
362. | [2] | 139016-0400 | BLEEDER SCREW |
362B. | [1] | 029001-6050 | BLEEDER SCREW |
363. | [3] | 014111-6440 | LOCKING WASHER |
363. | [3] | 014111-6440 | LOCKING WASHER |
364. | [1] | 154354-6120 | CONTROL CYLINDER |
365. | [2] | 010110-8040 | BLEEDER SCREW |
366. | [2] | 014111-0440 | LOCKING WASHER |
367. | [1] | 154372-7600 | PLATE |
368. | [2] | 020106-1040 | BLEEDER SCREW M6P1L12 |
370. | [0] | 029311-0570 | SHIM D20.8&10.3T0.5 |
371. | [1] | 154338-9600 | COILED SPRING |
372. | [1] | 154372-8800 | BRACKET |
373. | [1] | 154352-4700 | STRAP |
374. | [1] | 154373-4500 | SAFETY PIN |
395. | [0] | 029310-7010 | SHIM D14.5&7T0.1 |
395A. | [0] | 029310-7020 | SHIM D14.5&7T0.3 |
395B. | [0] | 029310-7030 | SHIM D14.5&7T0.5 |
550. | [1] | 153169-5620 | MICROSWITCH |
900S. | [1] | 025803-1310 | WOODRUFF KEY |
901S. | [1] | 025803-1610 | WOODRUFF KEY |
Include in #1:
106873-7270
as GOVERNOR
Cross reference number
Zexel num
Bosch num
Firm num
Name
105487-6930
ME740427 MITSUBISHI
GOVERNOR
K 14JN MECHANICAL GOVERNOR GOV RFD GOV
K 14JN MECHANICAL GOVERNOR GOV RFD GOV
Information:
Introduction
Injector height setting is extremely important during the engine assembly process. The recommended intervals that are specified in the Operation and Maintenance Manual must be followed.Problem
An issue has been identified with the correct injector height settings. Check the injector height. Bottoming of the fuel injector rocker arm may be caused by the injector height being to high or low. Bottoming of the fuel injector can create a crack at the nose of the fuel injector rocker arm through the first and second threads of the adjusting screw hole. Once the crack has started it can result in the breaking of the fuel injector rocker arm at the nose. Breaking of the fuel injector rocker arm will result in an immediate poor engine performance.Solution
Performing the recommended inspection of the fuel injector rocker arm at the specified intervals in the operation and maintenance manual is important. Inspect the height
Injector height setting is extremely important during the engine assembly process. The recommended intervals that are specified in the Operation and Maintenance Manual must be followed.Problem
An issue has been identified with the correct injector height settings. Check the injector height. Bottoming of the fuel injector rocker arm may be caused by the injector height being to high or low. Bottoming of the fuel injector can create a crack at the nose of the fuel injector rocker arm through the first and second threads of the adjusting screw hole. Once the crack has started it can result in the breaking of the fuel injector rocker arm at the nose. Breaking of the fuel injector rocker arm will result in an immediate poor engine performance.Solution
Performing the recommended inspection of the fuel injector rocker arm at the specified intervals in the operation and maintenance manual is important. Inspect the height