105487-3291 ZEXEL GOVERNOR Cross 1054873291 me726060


 

Information governor

ZEXEL 105487-3291 1054873291
MITSUBISHI ME726060 me726060
105487-3291 GOVERNOR
Rating:
8
Buy GOVERNOR 105487-3291 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105487-3291 
105487-3292 
 
ME726060  MITSUBISHI
GOVERNOR
*




Information:

Start By:a. remove automatic timing advanceb. remove oil panc. remove water pumpd. remove crankshaft front seal and wear sleeve 1. Disconnect clip (1) for the wiring harness.2. Remove connector (2) from the clip. 3. Fasten Tooling (A) and a hoist to the timing gear cover. The weight of the timing gear cover is 18 kg (40 lb).4. Use Tooling (B) to remove studs (3).5. Move fuel overflow tube (4) out of the way.6. Remove cover (5) and the gasket.7. Disconnect all wiring harness clips from the timing gear housing, and move the wiring harness out of the way.8. Remove the bolts that hold the timing gear cover to the cylinder block, and remove the timing gear cover.9. Remove the gasket for the timing gear cover.10. Thoroughly clean the gasket surface of the cylinder block and the timing gear cover. Be careful not to scratch or mar the gasket surface of the aluminum timing gear cover.Install Timing Gear Cover
1. Install new O-ring seal (1) on the fuel injection pump housing. Put clean engine oil on the O-ring seal.2. Put new gasket (2) in position on the cylinder block. Engage the gasket with the two dowels. Use clean 2S-3230 Bearing Lubricant to hold the gasket in place on the cylinder block. 3. Put the timing gear cover in position on the dowels. Install the bolts that hold the timing gear cover to the cylinder block.4. Install cover (6), and a new gasket.5. Connect the wiring harness clips to the timing gear housing.6. Connect the clip that holds fuel overflow tube (5).7. Use Tooling (B) to install studs (3).8. Remove Tooling (A).9. Put 5P-3413 Pipe Sealant with "Teflon" on the threads of stud (4). Use Tool (B) to install stud (4) to a height of 28.96 mm (1.140 in).10. Install the clip that holds the wiring harness.11. Install the connector in the clip.12. Trim gasket (2) even with the oil pan surface of the cylinder block and timing gear cover.End By:a. install crankshaft front seal and wear sleeveb. install water pumpc. install oil pand. install automatic timing advance

Have questions with 105487-3291?





Group cross 105487-3291 ZEXEL

Mitsubishi 

 
ME722935 
GOVERNOR
F 019 Z4E 778 
NP-EP/RFD200/1300PF10DGR 
ME726280 
GOVERNOR

Nissan-Diesel 

9 420 611 968 
NP-EP/RFD200/1650PF9CJDR 
1910197308 
GOVERNOR

Mitsubishi 

 
ME722936 
GOVERNOR
F 019 Z4E 779 
NP-EP/RFD200/1650PF9CZR 
ME726583 
GOVERNOR
 
ME722937 
GOVERNOR
F 019 Z4E 780 
NP-EP/RFD200/1650PF9CZR 
ME726584 
GOVERNOR
 
ME722938 
GOVERNOR
F 019 Z4E 781 
NP-EP/RFD200/1300PF10DGR 
ME726279 
GOVERNOR
 
ME722939 
GOVERNOR
F 019 Z4E 782 
NP-EP/RFD200/1300PF10DGR 
ME726585 
GOVERNOR
 
ME722931 
GOVERNOR
F 019 Z4E 783 
NP-EP/RFD200/1300PF10DZR 
ME726586 
GOVERNOR

Nissan-Diesel 

F 019 Z4E 784 
NP-EP/RFD200/1350PF7CSR 
1910196662 
GOVERNOR

Mitsubishi 

 
ME722967 
GOVERNOR
 
ME726059 
GOVERNOR
F 019 Z4E 785 
NP-EP/RFD200/1300PF10DZR 
ME730225 
GOVERNOR
 
ME722968 
GOVERNOR
105487-3291  

105487-3292 
 
ME726060 
GOVERNOR
F 019 Z4E 786 
NP-EP/RFD200/1300PF10DZR 
ME730304 
GOVERNOR
Back to top