105487-0911 ZEXEL GOVERNOR Cross 1054870911 me726544


 

Information governor

ZEXEL 105487-0911 1054870911
MITSUBISHI ME726544 me726544
105487-0911 GOVERNOR
Rating:
46
Buy GOVERNOR 105487-0911 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105487-0911 
 
ME726544  MITSUBISHI
GOVERNOR
* K




Information:

(1) Bore in idler gear bearing ... 28.600 0.061 mm (1.1260 .0024 in) Diameter of idler gear shaft ... 28.512 0.013 mm (1.1225 .0005 in)Clearance between bearing and shaft ... .014 to .162 mm (.0011 to .0059 in)(2) Clearance between gear and body of pump ... 0.05 to 0.66 mm (.002 to .026 in)(3) Diameter of shafts for pump ... 22.217 0.005 mm (.8747 .0002 in) Bore in bearings for shafts ... 22.286 0.051 mm (.8774 .0020 in)Clearance between shafts and bearings ... .013 to .125 mm (.0010 to .0050 in)(4) Depth that bearings are installed in pump bodies ... 1.52 0.25 mm (.060 .010 in)(5) Length of gears ... 50.808 0.025 mm (2.0003 0.0010 in) Depth of bore in pump body for gears ... 50.935 0.020 mm (2.0053 0.0008 in)Clearance between end of gears and pump body ... 0.081 to 0.173 mm (.0032 to .0068 in)(6) Length of gears ... 38.070 0.025 mm (1.4988 0.0010 in) Depth of bore in pump body for gears ... 38.197 0.020 mm (1.5038 0.0008 in)Clearance between end of gears and pump body ... 0.081 to 0.173 mm (.0032 to .0068 in)(7) Distance from the end of the idler shafts to gear faces ... 21.03 0.13 mm (.828 .005 in) Maximum temperature of gear when shrinking in place ... 400°C (750°F)(8) Distance from the end of the drive shaft to gear face ... 38.23 0.13 mm (1.505 0.005 in) Maximum temperature of gear when shrinking in place ... 400°C (750°F)(9) Torque for bolt holding drive gear to drive shaft ... 47 9 N m (35 7 lb ft) Install the bearings in the cover and body for the oil pump so the bearing junctions (joints) are in the position shown.(10) Distance dowel extends from body ... 4.1 0.5 mm (.16 .02 in)(11) Shaft assembly. Distance shaft assembly extends from body ... 30.50 0.25 mm (1.201 0.010 in)
Section A-A
Oil Pump Bypass Spring(12) 115-7545 Spring: Length under test force ... 22.22 mm (.875 in)Test force ... 780 N (175 lb)Free length after test ... 25.4 mm (1.00 in)Outside diameter ... 18.54 mm (.730 in) Before running, lubricate pump with oil. Pump must rotate freely by hand.

Have questions with 105487-0911?





Group cross 105487-0911 ZEXEL

Mitsubishi 

 
ME726543 
GOVERNOR
105487-0911  
 
ME726544 
GOVERNOR

Isuzu 

F 019 Z4E 707 
NP-EP/RFD200/1650PF24CYRN30 
1157203770 
GOVERNOR
 
1157203760 
GOVERNOR
 
1157203850 
GOVERNOR
 
1157203840 
GOVERNOR

Mitsubishi 

 
ME716920 
GOVERNOR
F 019 Z1E 416 
NP-EP/RFD200/1400PF31DSRN34 
ME730824 
GOVERNOR
 
ME726545 
GOVERNOR

Nissan-Diesel 

 
1910197161 
GOVERNOR
 
1910197166 
GOVERNOR
9 420 611 962 
 
GOVERNOR

Nissan-Diesel 

9 420 611 963 
NP-EP/RFD200/1350PF7CSRN36 
1910197163 
GOVERNOR

Mitsubishi 

 
ME726546 
GOVERNOR
Back to top