Information governor
BOSCH
9 420 610 089
9420610089
ZEXEL
105447-5633
1054475633
MITSUBISHI-HEAV
3626503121
3626503121
Rating:
Scheme ###:
| 1. | [1] | 154002-2820 | GOVERNOR HOUSING |
| 5. | [1] | 154007-1600 | CAPSULE |
| 10. | [8] | 020106-2040 | BLEEDER SCREW M6P1L20 |
| 12. | [1] | 154034-0800 | BLEEDER SCREW |
| 13. | [2] | 154011-0100 | HEXAGON NUT |
| 13. | [2] | 154011-0100 | HEXAGON NUT |
| 14. | [1] | 020006-1440 | BLEEDER SCREW M6P1L14 |
| 35. | [1] | 154520-6220 | GOVERNOR COVER |
| 35/2. | [1] | 154321-0400 | BUSHING |
| 38. | [1] | 154031-0100 | FLAT-HEAD SCREW |
| 39. | [1] | 013020-6020 | UNION NUT M6P1H5 |
| 47. | [1] | 154036-0300 | CAPSULE |
| 48. | [1] | 154037-2300 | FLAT-HEAD SCREW |
| 49. | [1] | 154038-0200 | HEXAGON NUT |
| 51. | [3] | 020106-5040 | BLEEDER SCREW |
| 52. | [3] | 020106-2840 | BLEEDER SCREW |
| 53. | [1] | 154034-0800 | BLEEDER SCREW |
| 55. | [4] | 029320-6010 | LOCKING WASHER |
| 55. | [4] | 029320-6010 | LOCKING WASHER |
| 56. | [1] | 029010-6080 | BLEEDER SCREW M6P1.0L50 |
| 65. | [1] | 153021-4820 | STOPPING DEVICE |
| 66. | [1] | 026524-3040 | GASKET |
| 80. | [1] | 154060-3800 | COVER |
| 82. | [2] | 020006-1640 | BLEEDER SCREW M6P1L16 4T |
| 83. | [2] | 029020-6210 | BLEEDER SCREW |
| 100. | [1] | 154100-6320 | FLYWEIGHT ASSEMBLY |
| 101. | [1] | 025803-1310 | WOODRUFF KEY |
| 102. | [1] | 029321-2020 | LOCKING WASHER |
| 103. | [1] | 029231-2030 | UNION NUT |
| 104. | [1] | 154120-0100 | PLAIN WASHER |
| 106. | [1] | 029602-0020 | LOCKING WASHER |
| 107. | [1] | 154121-0500 | TOOTHED GEAR |
| 108. | [1] | 016610-2640 | BEARING PLATE |
| 109. | [1] | 028102-0010 | BEARING PLATE |
| 111. | [1] | 154134-0000 | SPACER BUSHING |
| 112. | [1] | 154122-0100 | COVER |
| 113. | [1] | 029614-7020 | LOCKING WASHER |
| 114. | [1] | 025803-1610 | WOODRUFF KEY |
| 115. | [1] | 029321-2020 | LOCKING WASHER |
| 116. | [1] | 029231-2030 | UNION NUT |
| 117. | [1] | 154123-1920 | SLIDING PIECE |
| 118/1. | [0] | 029311-0010 | SHIM D14&10.1T0.2 |
| 118/1. | [0] | 029311-0180 | SHIM D14&10.1T0.3 |
| 118/1. | [0] | 029311-0190 | SHIM D14&10.1T0.40 |
| 118/1. | [0] | 029311-0210 | SHIM D14&10.1T1 |
| 118/1. | [0] | 139410-0000 | SHIM D14.0&10.1T0.5 |
| 118/1. | [0] | 139410-0100 | SHIM D14.0&10.1T1.5 |
| 118/1. | [0] | 139410-3000 | SHIM D14&10.1T2.0 |
| 118/1. | [0] | 139410-3100 | SHIM D14&10.1T3.0 |
| 118/1. | [0] | 139410-3200 | SHIM D14&10.1T4.0 |
| 119. | [1] | 154130-1820 | TOOTHED GEAR |
| 119/3. | [4] | 153251-0100 | DAMPER |
| 119/4. | [1] | 139329-0000 | PLAIN WASHER |
| 119/5. | [1] | 016020-2810 | LOCKING WASHER |
| 122. | [3] | 020106-2840 | BLEEDER SCREW |
| 132. | [1] | 154154-0900 | COILED SPRING |
| 133. | [2] | 154156-0100 | TUBE |
| 135. | [1] | 154157-5020 | HEADLESS SCREW |
| 136. | [1] | 029201-2030 | UNION NUT M12P1.0H4 |
| 137. | [2] | 026512-1540 | GASKET D15.4&12.2T1.50 |
| 138. | [1] | 154159-1200 | CAP NUT |
| 140. | [1] | 154176-3620 | HEADLESS SCREW |
| 141. | [1] | 029201-6010 | UNION NUT |
| 150. | [1] | 154200-0621 | SWIVELLING LEVER |
| 151. | [1] | 154204-0201 | BUSHING |
| 152. | [2] | 139718-0200 | O-RING |
| 152. | [2] | 139718-0200 | O-RING |
| 153. | [2] | 016010-1640 | LOCKING WASHER |
| 153. | [2] | 016010-1640 | LOCKING WASHER |
| 154. | [1] | 139611-0300 | PACKING RING |
| 155. | [1] | 029311-1010 | SHIM |
| 158. | [1] | 154204-3600 | BUSHING |
| 159. | [1] | 025803-1310 | WOODRUFF KEY |
| 170. | [1] | 154211-7620 | FORK LEVER |
| 174. | [1] | 154230-0220 | STRAP |
| 175. | [1] | 016010-0540 | LOCKING WASHER |
| 176. | [1] | 154232-0400 | CONNECTOR |
| 177. | [2] | 029050-5040 | FLAT-HEAD SCREW M5P0.8L9 |
| 181. | [1] | 154236-8620 | TENSIONING LEVER |
| 182. | [1] | 154237-1500 | BEARING PIN |
| 190. | [1] | 154309-6320 | CONTROL LEVER |
| 191. | [1] | 154367-5620 | CONTROL LEVER |
| 192. | [1] | 020006-2840 | BLEEDER SCREW M6P1L28 |
| 195. | [1] | 154314-1800 | COILED SPRING |
| 201. | [1] | 139710-0500 | O-RING |
| 203. | [0] | 029311-0220 | SHIM D18&10.3T0.2 |
| 203B. | [0] | 029311-0230 | SHIM D18&10.3T0.5 |
| 207. | [1] | 154326-5420 | CONTROL LEVER |
| 235. | [1] | 155412-5300 | IMPELLER WHEEL |
| 236. | [1] | 154371-5600 | GASKET |
| 237. | [1] | 154371-3500 | GASKET |
| 238. | [1] | 029635-5010 | O-RING |
| 255. | [1] | 154213-5100 | BRACKET |
| 256. | [1] | 020308-1640 | BLEEDER SCREW M8P1.25L16 |
| 257. | [1] | 014110-8440 | LOCKING WASHER |
| 350. | [1] | 154036-1600 | ADAPTOR |
| 351. | [1] | 139806-0000 | EYE BOLT |
| 352. | [2] | 029340-6120 | GASKET |
| 353. | [1] | 026510-1340 | GASKET D13.4&10.2T1 |
| 900S. | [1] | 025803-1310 | WOODRUFF KEY |
| 901S. | [1] | 025803-1610 | WOODRUFF KEY |
Cross reference number
Zexel num
Bosch num
Firm num
Name
105447-5633
3626503121 MITSUBISHI-HEAV
GOVERNOR
K 14JC MECHANICAL GOVERNOR GOV RSUV(D) GOV
K 14JC MECHANICAL GOVERNOR GOV RSUV(D) GOV
Information:
Introduction
This publication contains information on the locking screw of the 341-8700 Fuel Injection Pump Gp . Locking Mechanism of the Three Lobe Fuel Pump
The locking screw is located on the side of the fuel injection pump. The locking screw is tightened with the washer in an Upward position. The washer is placed in the Upward position for shipping purposes prior to installation. Refer to Illustration 1. The locking screw must be moved to the Unlocked position after installation and prior to starting the engine. Loosen the screw and reposition the washer to the Downward position. Tighten the screw after moving the washer to the Downward position. Refer to Illustration 2
Illustration 1 g02166847
Locked position (1) Locking screw (2) Washer is moved in the upward position
Illustration 2 g02168035
Unlocked position (1) Locking Screw (2) Washer is moved in the downward position
This publication contains information on the locking screw of the 341-8700 Fuel Injection Pump Gp . Locking Mechanism of the Three Lobe Fuel Pump
The locking screw is located on the side of the fuel injection pump. The locking screw is tightened with the washer in an Upward position. The washer is placed in the Upward position for shipping purposes prior to installation. Refer to Illustration 1. The locking screw must be moved to the Unlocked position after installation and prior to starting the engine. Loosen the screw and reposition the washer to the Downward position. Tighten the screw after moving the washer to the Downward position. Refer to Illustration 2
Illustration 1 g02166847
Locked position (1) Locking screw (2) Washer is moved in the upward position
Illustration 2 g02168035
Unlocked position (1) Locking Screw (2) Washer is moved in the downward position