Information governor
BOSCH
F 019 Z9E 865
f019z9e865
ZEXEL
105407-2881
1054072881

Rating:
Scheme ###:
1. | [1] | 154000-4700 | GOVERNOR HOUSING |
3. | [1] | 029632-5070 | O-RING |
4. | [1] | 154007-2900 | CAPSULE |
9. | [1] | 154350-6000 | PLATE |
10. | [8] | 020106-2040 | BLEEDER SCREW M6P1L20 |
10. | [8] | 020106-2040 | BLEEDER SCREW M6P1L20 |
12. | [1] | 154010-0100 | FLAT-HEAD SCREW |
13. | [2] | 154011-0100 | HEXAGON NUT |
13. | [2] | 154011-0100 | HEXAGON NUT |
14. | [1] | 154012-2220 | BLEEDER SCREW |
15. | [1] | 014110-8440 | LOCKING WASHER |
35. | [1] | 154500-8120 | GOVERNOR COVER |
35/2. | [1] | 154321-0400 | BUSHING |
38. | [1] | 154031-4300 | FLAT-HEAD SCREW |
39. | [1] | 139208-0400 | UNION NUT |
51. | [2] | 020106-5040 | BLEEDER SCREW |
53. | [1] | 154010-0200 | FLAT-HEAD SCREW |
56. | [4] | 020106-3840 | BLEEDER SCREW |
65. | [1] | 154417-9420 | MANIFOLD-PRESSURE COMP. |
65/1. | [1] | 154408-8920 | DIAPHRAGM HOUSING |
65/1A. | [1] | 154408-2901 | SPACER BUSHING |
65/1B. | [1] | 134009-0000 | SPACER BUSHING |
65/9. | [1] | 154402-8800 | COILED SPRING |
65/10. | [1] | 154400-7520 | DIAPHRAGM |
65/11. | [1] | 154400-6101 | STOP PIN |
65/12. | [1] | 154406-5300 | GUIDE SLEEVE |
65/13. | [1] | 154406-5400 | UNION NUT |
65/14. | [1] | 154406-5500 | SLOTTED WASHER |
65/15. | [1] | 013020-6040 | UNION NUT M6P1H5 |
65/16. | [1] | 154402-8900 | COILED SPRING |
65/17. | [2] | 154413-2600 | GASKET |
65/18. | [1] | 154404-4920 | COVER |
65/19. | [2] | 020106-2040 | BLEEDER SCREW M6P1L20 |
65/20. | [1] | 029010-6310 | BLEEDER SCREW |
65/21. | [1] | 014110-6440 | LOCKING WASHER |
65/24. | [2] | 020106-2040 | BLEEDER SCREW M6P1L20 |
65/27. | [1] | 029731-0180 | EYE BOLT |
65/28. | [2] | 026510-1340 | GASKET D13.4&10.2T1 |
65/29. | [1] | 154390-1700 | GASKET |
65/43. | [1] | 154390-1800 | GASKET |
65/45. | [1] | 029331-8040 | GASKET |
65/46. | [1] | 154406-5800 | FLAT-HEAD SCREW |
65/47. | [1] | 014110-6440 | LOCKING WASHER |
65/50. | [1] | 154406-6800 | PLAIN WASHER |
65/51. | [1] | 154406-6901 | CONTROL LEVER |
65/52. | [1] | 014110-4440 | LOCKING WASHER |
65/53. | [1] | 010234-0820 | HEX-SOCKET-HEAD CAP SCREW |
65/54. | [1] | 013030-6040 | UNION NUT M6P1H3.6 |
65/55C. | [1] | 154404-1700 | FLAT-HEAD SCREW L30.00 |
65/56. | [1] | 029331-2130 | GASKET |
65/57. | [1] | 154406-6500 | FLAT-HEAD SCREW |
65/58. | [1] | 020106-2540 | BLEEDER SCREW M6P1L25 |
65/59. | [2] | 139006-9300 | BLEEDER SCREW |
65/61. | [1] | 029010-6310 | BLEEDER SCREW |
65/62. | [1] | 014110-6440 | LOCKING WASHER |
65/70. | [1] | 029240-6010 | UNION NUT M6P1.0H5* |
65/71. | [1] | 029030-6020 | BLEEDER SCREW M6P1.0L18 |
65/72. | [1] | 139608-0000 | PACKING RING |
65/73. | [1] | 139605-0100 | PACKING RING |
65/74. | [1] | 154408-9000 | CONTROL LEVER |
65/75. | [1] | 154406-7500 | CONTROL LEVER |
65/76. | [1] | 154406-8000 | LEVER SHAFT |
65/77. | [1] | 029310-5200 | SHIM |
65/78. | [1] | 014020-8120 | PLAIN WASHER D16&8.5T1.2 |
65/79. | [1] | 154372-6500 | SAFETY PIN |
65/80. | [0] | 029310-8040 | SHIM D13.5&8T0.2 |
65/80B. | [0] | 029310-8050 | SHIM D13.5&8T0.5 |
65/81. | [1] | 025520-1210 | SPLIT PIN |
65/82. | [2] | 029300-8320 | SHIM |
65/83. | [1] | 154403-9900 | COILED SPRING |
65/84. | [1] | 154406-7700 | CONTROL LEVER |
65/85. | [1] | 014110-8440 | LOCKING WASHER |
65/86. | [1] | 013020-8140 | UNION NUT M8P1.25H6.5 |
80. | [1] | 154063-7300 | COVER |
82. | [2] | 029020-6210 | BLEEDER SCREW |
83. | [2] | 020006-1640 | BLEEDER SCREW M6P1L16 4T |
100. | [1] | 154101-0020 | FLYWEIGHT ASSEMBLY |
101. | [1] | 025803-1310 | WOODRUFF KEY |
102. | [1] | 029321-2020 | LOCKING WASHER |
103. | [1] | 029231-2030 | UNION NUT |
117. | [1] | 154123-2320 | SLIDING PIECE |
118/1. | [0] | 029311-0010 | SHIM D14&10.1T0.2 |
118/1. | [0] | 029311-0180 | SHIM D14&10.1T0.3 |
118/1. | [0] | 029311-0190 | SHIM D14&10.1T0.40 |
118/1. | [0] | 029311-0210 | SHIM D14&10.1T1 |
118/1. | [0] | 139410-0000 | SHIM D14.0&10.1T0.5 |
118/1. | [0] | 139410-0100 | SHIM D14.0&10.1T1.5 |
118/1. | [0] | 139410-3000 | SHIM D14&10.1T2.0 |
118/1. | [0] | 139410-3100 | SHIM D14&10.1T3.0 |
118/1. | [0] | 139410-3200 | SHIM D14&10.1T4.0 |
130. | [1] | 154150-0400 | GOVERNOR SPRING |
132. | [1] | 154154-0500 | COILED SPRING |
135. | [1] | 154158-3420 | HEADLESS SCREW |
136. | [1] | 154011-1700 | UNION NUT |
137. | [2] | 026512-1540 | GASKET D15.4&12.2T1.50 |
138. | [1] | 154159-1200 | CAP NUT |
140. | [1] | 154185-3520 | HEADLESS SCREW |
141. | [1] | 029201-6010 | UNION NUT |
150. | [1] | 154200-7020 | SWIVELLING LEVER |
151. | [1] | 154204-4300 | BUSHING |
152. | [2] | 139718-0200 | O-RING |
152. | [2] | 139718-0200 | O-RING |
153. | [2] | 016010-1640 | LOCKING WASHER |
153. | [2] | 016010-1640 | LOCKING WASHER |
154. | [1] | 139611-0300 | PACKING RING |
155. | [1] | 139411-0000 | SHIM |
156. | [0] | 029311-1070 | SHIM D16&11T0.5 |
157. | [1] | 154204-4400 | BUSHING |
159. | [1] | 025803-1310 | WOODRUFF KEY |
160. | [1] | 154206-2800 | BUSHING |
161. | [0] | 154206-0200 | PLAIN WASHER D19.5&11.2T1.0 |
170. | [1] | 154210-2720 | FORK LEVER |
174. | [1] | 154234-2920 | STRAP |
175. | [1] | 016010-0540 | LOCKING WASHER |
176. | [1] | 159231-4900 | BEARING PIN |
178. | [1] | 155402-3800 | SAFETY PIN |
181. | [1] | 154236-4100 | TENSIONING LEVER |
182. | [1] | 154237-1700 | BEARING PIN |
190. | [1] | 154343-2620 | CONTROL LEVER |
191. | [1] | 154365-0500 | CONTROL LEVER |
192. | [1] | 020006-1640 | BLEEDER SCREW M6P1L16 4T |
195. | [1] | 154314-2600 | COILED SPRING |
201. | [1] | 139710-0500 | O-RING |
203. | [1] | 154322-0100 | CAP |
207. | [1] | 154326-5020 | CONTROL LEVER |
208. | [1] | 154327-7400 | COILED SPRING |
211/1. | [0] | 029311-0520 | SHIM D20.8&10.3T0.2 |
211/1. | [0] | 029311-0530 | SHIM D20.8&10.3T0.25 |
211/1. | [0] | 029311-0540 | SHIM D20.8&10.3T0.3 |
211/1. | [0] | 029311-0550 | SHIM D20.8&10.3T0.35 |
211/1. | [0] | 029311-0560 | SHIM D20.8&10.3T0.4 |
211/1. | [0] | 029311-0570 | SHIM D20.8&10.3T0.5 |
236. | [1] | 154371-5600 | GASKET |
237. | [1] | 154390-0300 | GASKET |
238. | [1] | 029635-2020 | O-RING |
335. | [2] | 026508-1140 | GASKET D11.4&8.2T1 |
336. | [1] | 154035-2000 | CAP NUT |
350. | [1] | 154036-1600 | ADAPTOR |
351. | [1] | 139806-0000 | EYE BOLT |
352. | [2] | 029340-6120 | GASKET |
354. | [1] | 029331-0090 | GASKET |
900S. | [1] | 025803-1310 | WOODRUFF KEY |
901S. | [1] | 025803-1610 | WOODRUFF KEY |
Include in #1:
106671-4152
as GOVERNOR
Cross reference number
Zexel num
Bosch num
Firm num
Name
105407-2881
F 019 Z9E 865
GOVERNOR
* K
* K
Information:
Caterpillar Warranty Coverage
Caterpillar warrants the DPF according to the time periods, whichever comes first. Refer to table
Table 1
Engine Type     Engine Size     Minimum Warranty Period    
Off Road (1)     Under 25 hp, and for constant speed engines rated under 50 hp with rated speeds greater than or equal to 3,000 RPM     3 years or 1,600 hours    
At or above 25 hp and under 50 hp 4 years or 2,600 hours    
At or above 50 hp 5 years or 4,200 hours    
( 1 ) Includes portable engines, stationary, marine, locomotives, TRU, and APU.If any emission-related part of your diesel emission control system is defective in design, materials, workmanship, or operation of the diesel emission control system thus causing the diesel emission control system to fail to conform to the emission control performance level the diesel emission control system was verified to, or to the requirements in the "California Code of Regulations Title 13 Sections 2700 to 2706 and 2710", within the warranty period, as defined above, Caterpillar will repair or replace the diesel emission control system, including parts and labor.In addition, Caterpillar will replace or repair the engine components to the condition prior to the failure, including parts and labor, for damage to the engine proximately caused by the verified diesel emission control strategy. This warranty also includes those relevant diagnostic expenses in the case in which a warranty claim is valid. Caterpillar may, instead pay the fair market value of the engine prior to the time the failure occurs.Owner Warranty Responsibility
As the (vehicle, engine, equipment) owner, you are responsible for performing the required maintenance described in your owners manual. Caterpillar recommends that you retain all maintenance records and receipts for maintenance expenses for your vehicle, engine, or equipment, and diesel emission control system. If you do not keep your receipts or fail to perform all scheduled maintenance, Caterpillar may have grounds to deny warranty coverage. You are responsible for presenting your vehicle, equipment, or engine, and diesel emission control system to a (applicant name) dealer as soon as a problem is detected. The warranty repair or replacement should be completed in a reasonable amount of time, not to exceed 30 days. If a replacement is needed, this process may be extended to 90 days should a replacement not be available, but must be performed as soon as a replacement becomes available.If you have questions regarding your warranty rights and responsibilities, contact (Insert chosen applicant contact) at:California Air Resources Board
9528 Telstar Avenue
El Monte, CA 91731
helpline@arb.ca.gov.
1-877-CAT-0909800-363-7664Refer to Special Instruction, REHS9213, "Caterpillar Post Installation Compatibility Assessment for Stationary Engines" and Special Instructions, REHS9214, "Post Installation Compatibility Assessment for NEW Stationary Engines".Register warranty per Caterpillar form Special Instruction, REHS5097, "Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}"Maintain all records of installation, pictures, warranty claims, and PICA Form. Provide training for all operation and maintenance.
Caterpillar warrants the DPF according to the time periods, whichever comes first. Refer to table
Table 1
Engine Type     Engine Size     Minimum Warranty Period    
Off Road (1)     Under 25 hp, and for constant speed engines rated under 50 hp with rated speeds greater than or equal to 3,000 RPM     3 years or 1,600 hours    
At or above 25 hp and under 50 hp 4 years or 2,600 hours    
At or above 50 hp 5 years or 4,200 hours    
( 1 ) Includes portable engines, stationary, marine, locomotives, TRU, and APU.If any emission-related part of your diesel emission control system is defective in design, materials, workmanship, or operation of the diesel emission control system thus causing the diesel emission control system to fail to conform to the emission control performance level the diesel emission control system was verified to, or to the requirements in the "California Code of Regulations Title 13 Sections 2700 to 2706 and 2710", within the warranty period, as defined above, Caterpillar will repair or replace the diesel emission control system, including parts and labor.In addition, Caterpillar will replace or repair the engine components to the condition prior to the failure, including parts and labor, for damage to the engine proximately caused by the verified diesel emission control strategy. This warranty also includes those relevant diagnostic expenses in the case in which a warranty claim is valid. Caterpillar may, instead pay the fair market value of the engine prior to the time the failure occurs.Owner Warranty Responsibility
As the (vehicle, engine, equipment) owner, you are responsible for performing the required maintenance described in your owners manual. Caterpillar recommends that you retain all maintenance records and receipts for maintenance expenses for your vehicle, engine, or equipment, and diesel emission control system. If you do not keep your receipts or fail to perform all scheduled maintenance, Caterpillar may have grounds to deny warranty coverage. You are responsible for presenting your vehicle, equipment, or engine, and diesel emission control system to a (applicant name) dealer as soon as a problem is detected. The warranty repair or replacement should be completed in a reasonable amount of time, not to exceed 30 days. If a replacement is needed, this process may be extended to 90 days should a replacement not be available, but must be performed as soon as a replacement becomes available.If you have questions regarding your warranty rights and responsibilities, contact (Insert chosen applicant contact) at:California Air Resources Board
9528 Telstar Avenue
El Monte, CA 91731
helpline@arb.ca.gov.
1-877-CAT-0909800-363-7664Refer to Special Instruction, REHS9213, "Caterpillar Post Installation Compatibility Assessment for Stationary Engines" and Special Instructions, REHS9214, "Post Installation Compatibility Assessment for NEW Stationary Engines".Register warranty per Caterpillar form Special Instruction, REHS5097, "Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}"Maintain all records of installation, pictures, warranty claims, and PICA Form. Provide training for all operation and maintenance.
Have questions with 105407-2881?
Group cross 105407-2881 ZEXEL
Hino
Isuzu
105407-2881
F 019 Z9E 865
GOVERNOR