Fuel injectors
  1. Home
  2. fuel
  3. #1080620200

108062-0200 ZEXEL 9 410 612 350 BOSCH FUEL-INJECTION PUMP 9410612350 1080620200 me742790


 

Information fuel-injection pump

BOSCH 9 410 612 350 9410612350
ZEXEL 108062-0200 1080620200
MITSUBISHI ME742790 me742790
108062-0200 FUEL-INJECTION PUMP
Rating:
53
Buy FUEL-INJECTION PUMP 108062-0200 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

PUMP HOUSING
1. [1] 134080-1420 PUMP HOUSING
1/30. [3] 029040-6020 STUD
1/45. [1] 134311-0000 SPACER RING
1/50. [12] 134138-0200 STUD
7. [6] 134149-3820 PLUNGER-AND-BARREL ASSY
7/1. [1] 134176-2220 PLUNGER-AND-BARREL ASSY
7/3. [1] 134160-1620 DELIVERY-VALVE ASSEMBLY
7/4. [1] 134171-0200 FITTING
7/5. [1] 016500-1800 O-RING
7/6. [1] 134117-1900 FILLER PIECE
7/7. [1] 134112-2200 COILED SPRING
7/8. [1] 134115-0300 GASKET
7/13. [1] 139727-0200 O-RING
7/14. [1] 016560-2310 O-RING
10. [1] 026516-2040 GASKET D19.9&16.2T1
11. [1] 134227-1200 CAPSULE
12. [1] 134227-1300 CONTROL ROD
13. [1] 134227-1400 BEARING PLATE
14. [1] 134227-0300 BUSHING
15. [6] 014160-6110 CONICAL SPRING WASHER
16. [6] 134227-0400 BEARING PIN
17. [6] 134227-0501 FLAT-HEAD SCREW
18. [1] 134227-2600 CONNECTOR
19. [1] 139005-0300 HEX-SOCKET-HEAD CAP SCREW
20. [1] 139320-0000 PLAIN WASHER
23/1. [0] 139400-0900 SHIM T0.500
23/1. [0] 139400-1000 SHIM T0.525
23/1. [0] 139400-1100 SHIM T0.550
23/1. [0] 139400-1200 SHIM T0.575
23/1. [0] 139400-1300 SHIM T0.600
23/1. [0] 139400-1400 SHIM T0.625
23/1. [0] 139400-1500 SHIM T0.650
23/1. [0] 139400-1600 SHIM T0.675
23/1. [0] 139400-1700 SHIM T0.700
23/1. [0] 139400-1800 SHIM T0.725
23/1. [0] 139400-1900 SHIM T0.750
23/1. [0] 139400-2000 SHIM T0.775
23/1. [0] 139400-2100 SHIM T0.800
23/1. [0] 139400-2200 SHIM T0.825
23/1. [0] 139400-2300 SHIM T0.850
23/1. [0] 139400-2400 SHIM T0.875
23/1. [0] 139400-2500 SHIM T0.900
23/1. [0] 139400-2600 SHIM T0.925
23/1. [0] 139400-2700 SHIM T0.950
23/1. [0] 139400-2800 SHIM T0.975
23/1. [0] 139400-2900 SHIM T1.000
23/1. [0] 139400-3000 SHIM T1.025
23/1. [0] 139400-3100 SHIM T1.050
23/1. [0] 139400-3200 SHIM T1.075
23/1. [0] 139400-3300 SHIM T1.100
23/1. [0] 139400-3400 SHIM T1.125
23/1. [0] 139400-3500 SHIM T1.150
23/1. [0] 139400-3600 SHIM T1.175
23/1. [0] 139400-3700 SHIM T1.200
23/1. [0] 139400-3800 SHIM T1.225
23/1. [0] 139400-3900 SHIM T1.250
23/1. [0] 139400-4000 SHIM T1.275
23/1. [0] 139400-4100 SHIM T1.300
23/1. [0] 139400-4200 SHIM T1.325
23/1. [0] 139400-4300 SHIM T1.350
23/1. [0] 139400-4400 SHIM T1.375
23/1. [0] 139400-4500 SHIM T1.400
23/1. [0] 139400-4600 SHIM T1.425
23/1. [0] 139400-4700 SHIM T1.450
23/1. [0] 139400-4800 SHIM T1.475
23/1. [0] 139400-4900 SHIM T1.500
23/1. [0] 139400-5000 SHIM T1.525
23/1. [0] 139400-5100 SHIM T1.550
23/1. [0] 139400-5200 SHIM T1.575
23/1. [0] 139400-5300 SHIM T1.600
23/1. [0] 139400-5400 SHIM T1.625
23/1. [0] 139400-5500 SHIM T1.650
23/1. [0] 139400-5600 SHIM T1.675
23/1. [0] 139400-5600 SHIM T1.675
23/1. [0] 139400-5700 SHIM T1.700
23/1. [0] 139400-5800 SHIM T1.725
23/1. [0] 139400-5900 SHIM T1.750
23/1. [0] 139400-6000 SHIM T1.775
23/1. [0] 139400-6100 SHIM T1.800
23/1. [0] 139400-6200 SHIM T1.825
23/1. [0] 139400-6300 SHIM T1.850
23/1. [0] 139400-6400 SHIM T1.875
23/1. [0] 139400-6500 SHIM T1.900
23/1. [0] 139400-6600 SHIM T1.925
23/1. [0] 139400-6700 SHIM T1.950
23/1. [0] 139400-6800 SHIM T1.975
24. [12] 134132-0300 PLAIN WASHER D20&11T2.5
26. [12] 139210-0200 UNION NUT
30. [2] 134001-0000 BUSHING
30. [2] 134001-0000 BUSHING
32. [1] 134256-3000 CONTROL RACK
33. [1] 024030-2030 BEARING PIN
34. [1] 134222-0000 BUSHING
41. [6] 134241-0620 CONTROL SLEEVE
43. [6] 134216-0401 SLOTTED WASHER
44. [6] 134215-1400 COMPRESSION SPRING
45. [6] 134217-0800 SLOTTED WASHER
46. [6] 134563-2800 SPRING SEAT
47. [4] 134200-1020 TAPPET
47/2. [1] 134204-0300 ROLLER
47/3. [1] 134203-0200 BEARING PIN
47/4. [1] 131206-0500 SLIDER
47/5. [1] 134208-0000 LOCKING WASHER
48. [2] 134200-0920 TAPPET
48/2. [1] 134204-0300 ROLLER
48/3. [1] 134203-0200 BEARING PIN
48/4. [1] 131206-0500 SLIDER
48/5. [1] 134208-0000 LOCKING WASHER
59. [1] 016650-2230 BEARING PLATE
64. [1] 134303-0500 SHIM D59.8&43T1.6
67. [4] 139006-4200 BLEEDER SCREW
71. [1] 134377-0800 CAMSHAFT
74. [1] 134306-1300 BEARING SHELL
75. [2] 020106-2040 BLEEDER SCREW M6P1L20
76. [2] 134306-1400 BEARING SHELL
77. [4] 020106-2040 BLEEDER SCREW M6P1L20
79. [1] 035302-0600 BEARING PLATE
80. [1] 134316-3300 COVER
81. [1] 139634-0200 PACKING RING
82/1. [0] 134314-0700 SHIM T0.1
82/1. [0] 134314-0800 SHIM T0.12
82/1. [0] 134314-0900 SHIM T0.14
82/1. [0] 134314-1000 SHIM T0.16
82/1. [0] 134314-1100 SHIM T0.18
82/1. [0] 134314-1200 SHIM T0.3
82/1. [0] 134314-1300 SHIM T0.5
83. [1] 139766-0000 O-RING
84. [1] 134563-2500 SLIDING PIECE
85. [1] 134043-0800 COVER
86. [1] 134042-1400 GASKET
87. [12] 134563-2900 FLAT-HEAD SCREW
88. [1] 134045-0100 CAPSULE
89. [1] 026524-2940 GASKET D28.9&24.3T2
93. [3] 139206-0400 UNION NUT
95. [1] 131041-0800 GASKET
96. [6] 134047-0000 CAPSULE
98. [1] 025806-2210 WOODRUFF KEY
118. [1] 134496-4200 POINTER
119. [2] 029020-6210 BLEEDER SCREW
120/1. [0] 139400-0100 SHIM T0.2
120/1. [0] 139400-0200 SHIM T0.3
120/1. [0] 139400-0300 SHIM T0.5
120/1. [0] 139400-0400 SHIM T1.0
120/1. [0] 139400-7200 SHIM T0.1
142. [1] 139810-1500 EYE BOLT
143. [2] 026510-1340 GASKET D13.4&10.2T1
162. [1] 131424-7220 OVER FLOW VALVE
163. [2] 029341-4130 GASKET D20&13.8T2*

Include in #1:

108621-2100 as FUEL INJECTION PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
108062-0200 
9 410 612 350 
NP-TC6HD120/32ALS1 
ME742790  MITSUBISHI
FUEL-INJECTION PUMP
Q




Information:


Select "Create" (9).Note: Two labels and a serial number plate will be sent to the nominated dealer address. If two labels are not received, contact Global_Engine_Marking.
Illustration 23 g06047218
Install the new emissions certification film (10), information label (11), and serial number plate on the cylinder block according to the installation instructions received with the labels and plate.Note: Destroy the old emissions certification film and serial number plate.Operation and Maintenance information
There are several specific messages on this machine. The exact location of the messages and the description of the messages are reviewed in this section. Become familiarized with all messages.Make sure that all messages are legible. Clean the messages or replace the messages if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. Loose adhesive will allow the messages to fall.Replace any message that is damaged, or missing. If a message is attached to a part that is replaced, install a message on the replacement part. Any Cat® dealer can provide new messages.
Illustration 24 g03516278
Location of films
(1) Engine Oil film
(2) Diesel Fuel Requirements filmEngine Oil (1)
This film is located next to the engine oil filler tube on the right side of the machine.
Illustration 25 g02448560Use Cat® DEO-ULS oils, and oils that satisfy "API CJ-4"and/or "ACEA E9", for engines that are equipped with a diesel particulate filter.Diesel Fuel Requirements (2)
This film is located next to the fuel cap at both sides of the machine.
Illustration 26 g03619316Use Ultralow Sulfur Diesel (ULSD) fuel.The Environmental Protection Agency (EPA) defines Ultra-Low Sulfur Diesel (ULSD - S15) as a diesel fuel with a sulfur content not to exceed 15 parts per million (ppm(mg/kg)), or 0.0015 percent by weight. Engines are equipped with exhaust after-treatment systems are designed to run on ULSD only. Use of LSD or fuels higher than 15 ppm (mg/kg) sulfur in these engines will reduce engine efficiency and engine durability. Damage to the emissions control systems and/or shortened service interval will occur. Failures that result form the use of fuels are not Caterpillar factory defects. Therefore the cost of repairs would not be covered by a Caterpillar warranty.In Europe, ultra low sulfur diesel fuel will have a maximum of 0.0010 percent (10 ppm(mg/kg)) sulfur and is typically referred to as “sulfur-free”. This sulfur level is defined in European Standard "EN 590:2004".Lubricant Viscosities - Fluids Recommendations
Engine Oil
Cat® oils have been developed and tested to provide the full performance and life that has been designed and built into Cat® engines.
Illustration 27 g02448560Cat® DEO-ULS or oils that meet the Cat® ECF-3 specification and the API CJ-4 are required for use in the applications listed below. Cat® DEO-ULS and oils meeting Cat® ECF-3 specification and the API CJ-4 and ACEA E9 oil categories have been developed with limited sulfated ash, phosphorus, and sulfur. These chemical limits are designed to maintain

Have questions with 108062-0200?





Group cross 108062-0200 ZEXEL

Mitsubishi 

108062-0200  
9 410 612 350 
NP-TC6HD120/32ALS1 
ME742790 
FUEL-INJECTION PUMP
Back to top