106068-2601 ZEXEL 9 410 610 544 BOSCH FUEL-INJECTION PUMP 9410610544 1060682601


 

Information fuel-injection pump

BOSCH 9 410 610 544 9410610544
ZEXEL 106068-2601 1060682601
106068-2601 FUEL-INJECTION PUMP
Rating:
76
Buy FUEL-INJECTION PUMP 106068-2601 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 134070-0720 PUMP HOUSING
1/2. [1] 131400-0100 ADAPTOR
1/3. [1] 131400-0100 ADAPTOR
1/11. [1] 134419-0000 ADAPTOR
1/30. [3] 029040-6020 STUD
1/45. [1] 134311-0000 SPACER RING
1/50. [12] 134138-0100 STUD
7. [6] 134147-6320 PLUNGER-AND-BARREL ASSY
7/1. [1] 134173-2420 PLUNGER-AND-BARREL ASSY
7/3. [1] 134160-5720 DELIVERY-VALVE ASSEMBLY
7/4. [1] 134171-0320 FITTING
7/5. [1] 016500-1850 O-RING
7/6. [1] 134117-1700 FILLER PIECE
7/7. [1] 134112-2200 COILED SPRING
7/8. [1] 134115-0300 GASKET
7/10. [1] 134135-0300 CAPSULE
7/11. [1] 029602-0010 LOCKING WASHER
7/13. [1] 139727-0300 O-RING
7/14. [1] 139715-0200 O-RING
7/15. [1] 139715-0200 O-RING
23/1. [0] 139400-0900 SHIM T0.500
23/1. [0] 139400-0900 SHIM T0.500
23/1. [0] 139400-1000 SHIM T0.525
23/1. [0] 139400-1100 SHIM T0.550
23/1. [0] 139400-1200 SHIM T0.575
23/1. [0] 139400-1300 SHIM T0.600
23/1. [0] 139400-1400 SHIM T0.625
23/1. [0] 139400-1500 SHIM T0.650
23/1. [0] 139400-1600 SHIM T0.675
23/1. [0] 139400-1700 SHIM T0.700
23/1. [0] 139400-1800 SHIM T0.725
23/1. [0] 139400-1900 SHIM T0.750
23/1. [0] 139400-2000 SHIM T0.775
23/1. [0] 139400-2100 SHIM T0.800
23/1. [0] 139400-2200 SHIM T0.825
23/1. [0] 139400-2300 SHIM T0.850
23/1. [0] 139400-2400 SHIM T0.875
23/1. [0] 139400-2500 SHIM T0.900
23/1. [0] 139400-2600 SHIM T0.925
23/1. [0] 139400-2700 SHIM T0.950
23/1. [0] 139400-2800 SHIM T0.975
23/1. [0] 139400-2900 SHIM T1.000
23/1. [0] 139400-3000 SHIM T1.025
23/1. [0] 139400-3100 SHIM T1.050
23/1. [0] 139400-3200 SHIM T1.075
23/1. [0] 139400-3300 SHIM T1.100
23/1. [0] 139400-3400 SHIM T1.125
23/1. [0] 139400-3500 SHIM T1.150
23/1. [0] 139400-3600 SHIM T1.175
23/1. [0] 139400-3700 SHIM T1.200
23/1. [0] 139400-3800 SHIM T1.225
23/1. [0] 139400-3900 SHIM T1.250
23/1. [0] 139400-4000 SHIM T1.275
23/1. [0] 139400-4100 SHIM T1.300
23/1. [0] 139400-4200 SHIM T1.325
23/1. [0] 139400-4300 SHIM T1.350
23/1. [0] 139400-4400 SHIM T1.375
23/1. [0] 139400-4500 SHIM T1.400
23/1. [0] 139400-4600 SHIM T1.425
23/1. [0] 139400-4700 SHIM T1.450
23/1. [0] 139400-4800 SHIM T1.475
23/1. [0] 139400-4900 SHIM T1.500
23/1. [0] 139400-5000 SHIM T1.525
23/1. [0] 139400-5100 SHIM T1.550
23/1. [0] 139400-5200 SHIM T1.575
23/1. [0] 139400-5300 SHIM T1.600
23/1. [0] 139400-5400 SHIM T1.625
23/1. [0] 139400-5500 SHIM T1.650
23/1. [0] 139400-5600 SHIM T1.675
23/1. [0] 139400-5700 SHIM T1.700
23/1. [0] 139400-5800 SHIM T1.725
23/1. [0] 139400-5900 SHIM T1.750
23/1. [0] 139400-6000 SHIM T1.775
23/1. [0] 139400-6100 SHIM T1.800
23/1. [0] 139400-6200 SHIM T1.825
23/1. [0] 139400-6300 SHIM T1.850
23/1. [0] 139400-6400 SHIM T1.875
23/1. [0] 139400-6500 SHIM T1.900
23/1. [0] 139400-6600 SHIM T1.925
23/1. [0] 139400-6700 SHIM T1.950
23/1. [0] 139400-6800 SHIM T1.975
24. [12] 134132-0300 PLAIN WASHER D20&11T2.5
26. [12] 139210-0200 UNION NUT
30. [2] 134001-0000 BUSHING
30. [2] 134001-0000 BUSHING
32. [1] 134256-0000 CONTROL RACK
33. [1] 024030-2030 BEARING PIN
34. [1] 134222-0000 BUSHING
41. [6] 134241-0620 CONTROL SLEEVE
43. [6] 134216-0000 SLOTTED WASHER
44. [6] 134215-0800 COMPRESSION SPRING
45. [6] 134217-0700 SLOTTED WASHER
46. [6] 134563-2700 SPRING SEAT
47. [4] 134200-0820 TAPPET
47/2. [1] 134204-0200 ROLLER
47/3. [1] 134203-0000 BEARING PIN
47/4. [1] 131206-0500 SLIDER
48. [2] 134200-0720 TAPPET
48/2. [1] 134204-0200 ROLLER
48/3. [1] 134203-0000 BEARING PIN
48/4. [1] 131206-0500 SLIDER
59. [1] 016650-2230 BEARING PLATE
64. [1] 134303-0500 SHIM D59.8&43T1.6
67. [4] 139006-4200 BLEEDER SCREW
71. [1] 134340-0700 CAMSHAFT
74. [1] 134306-1000 BEARING SHELL
75. [2] 020106-2040 BLEEDER SCREW M6P1L20
76. [2] 134306-1100 BEARING SHELL
77. [4] 020106-2040 BLEEDER SCREW M6P1L20
79. [1] 035302-0600 BEARING PLATE
80. [1] 134316-3300 COVER
81. [1] 139634-0400 PACKING RING
82/1. [0] 134314-0700 SHIM T0.1
82/1. [0] 134314-0800 SHIM T0.12
82/1. [0] 134314-0900 SHIM T0.14
82/1. [0] 134314-1000 SHIM T0.16
82/1. [0] 134314-1100 SHIM T0.18
82/1. [0] 134314-1200 SHIM T0.3
82/1. [0] 134314-1300 SHIM T0.5
83. [1] 139766-0200 O-RING
84. [1] 134563-2500 SLIDING PIECE
85. [1] 134043-0800 COVER
86. [1] 134042-1400 GASKET
87. [12] 012206-1640 FLAT-HEAD SCREW M6P1L16
88. [1] 134045-0100 CAPSULE
89. [1] 026524-2940 GASKET D28.9&24.3T2
93. [3] 139206-0400 UNION NUT
95. [1] 131041-0800 GASKET
96. [6] 134047-0000 CAPSULE
98. [1] 025806-2210 WOODRUFF KEY
118. [1] 134496-3400 POINTER
119. [2] 020006-1240 BLEEDER SCREW M6P1L12 4T
132. [1] 029731-4680 EYE BOLT
133. [2] 029341-4130 GASKET D20&13.8T2*
141. [1] 134433-4820 PIPE
142. [1] 029731-0490 EYE BOLT
143. [3] 029341-0110 GASKET
152. [1] 131424-3420 OVER FLOW VALVE
153. [2] 029341-4130 GASKET D20&13.8T2*
162. [1] 029731-4570 EYE BOLT
163. [2] 029341-4130 GASKET D20&13.8T2*
172. [1] 131420-0400 BLEEDER SCREW
173. [1] 026506-1040 GASKET D9.9&6.2T1
186. [1] 134510-8220 BRACKET

Include in #1:

106681-4191 as FUEL INJECTION PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
106068-2601 
106068-2602 
9 410 610 544 
   
FUEL-INJECTION PUMP
* Q




Information:

Oils
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.Keep all exhaust manifold and turbocharger shields in place to protect hot exhaust from oil spray in the event of a line, tube or seal failure.Batteries
Always wear protective glasses when working with batteries. Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes.Wash hands after touching batteries and connectors. Use of gloves is recommended.Do not smoke when observing the battery electrolyte levels. Batteries give off flammable fumes which can explode. Ensure there is proper ventilation for batteries which are located in an enclosure.Never disconnect any charging unit circuit or battery circuit cable from the battery when charging unit is operating. A spark can cause the flammable vapor mixture of hydrogen and oxygen to explode.Fire or Explosion Prevention
Fire may result from lubricating oil or fuel sprayed on hot surfaces causing personal injury and property damage. Inspect all lines and tubes for wear or deterioration. They must be routed, supported or clamped securely. Tighten all connections to the recommended torque. Leaks can cause fires. Determine whether the engine will be operated in an environment in which combustible gases could be drawn through the air inlet system. These gases could cause the engine to overspeed, which in turn could seriously damage the engine and result in bodily injury or property damage.If your application involves the presence of combustible gases, consult your Caterpillar dealer to obtain additional information concerning protection devices suitable for the application involved.All fuels, most lubricants and some coolant mixtures are flammable. Diesel fuel is flammable. Gasoline is flammable. The mixture of diesel and gasoline fumes are extremely explosive.Do not smoke while refueling or in a refueling area.Do not smoke in areas where batteries are charged, or where flammable materials are stored.Always thaw a frozen battery before jump starting. Frozen batteries may explode. Batteries give off flammable fumes which can explode.Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Remove all flammable materials such as fuel, oil and other debris before they accumulate on the engine.Exhaust shields (if equipped), which protect hot exhaust components from oil or fuel spray in the event of a line, tube or seal failure, must be installed correctly.Provide adequate and proper waste oil disposal. Oil and fuel filters must be properly installed and housing covers tightened to proper torque when being changed.Batteries must be kept clean, covers kept on all cells, recommended cables and connections used and battery box covers kept in place when operating. When starting from an external source, always connect the positive (+) jumper cable to the POSITIVE (+) terminal of the battery of the engine to be

Have questions with 106068-2601?





Group cross 106068-2601 ZEXEL

9 410 610 543 
 
FUEL-INJECTION PUMP
106068-2601  

106068-2602 
9 410 610 544 
 
FUEL-INJECTION PUMP

Mitsubishi-Heav 

9 410 610 545 
35A6514130 
FUEL-INJECTION PUMP
9 410 613 427 
NP-PE6P130/321LS7S 
35A6524130 
FUEL-INJECTION PUMP
9 410 611 902 
NP-PES6P130/400LS7S 
 
FUEL-INJECTION PUMP
9 410 611 269 
 
FUEL-INJECTION PUMP
9 410 611 752 
 
FUEL-INJECTION PUMP
9 410 610 587 
NP-PE6P130/320RS7S 
 
FUEL-INJECTION PUMP
9 410 610 546 
 
FUEL-INJECTION PUMP
9 410 610 547 
 
FUEL-INJECTION PUMP

Mitsubishi-Heav 

9 410 610 548 
35A6514170 
FUEL-INJECTION PUMP
9 410 613 428 
NP-PE6P130/321LS7S 
 
FUEL-INJECTION PUMP

Mitsubishi-Heav 

9 410 610 549 
35A6504391 
FUEL-INJECTION PUMP

Nissan-Diesel 

9 410 610 550 
35A6514390 
FUEL-INJECTION PUMP

Mitsubishi-Heav 

9 410 610 551 
35A6514390 
FUEL-INJECTION PUMP
9 410 613 443 
 
FUEL-INJECTION PUMP
9 410 613 530 
NP-PE6P130/301LS7S 
 
FUEL-INJECTION PUMP
9 410 610 588 
 
FUEL-INJECTION PUMP
9 410 611 753 
NP-PE6P130/320LS7S 
 
FUEL-INJECTION PUMP
9 410 610 321 
NP-PE6P130/320LS7S 
 
FUEL-INJECTION PUMP
Back to top