Fuel injectors
  1. Home
  2. fuel
  3. #1060682553

106068-2553 ZEXEL 9 410 613 320 BOSCH FUEL-INJECTION PUMP 9410613320 1060682553 34a6524270


 

Information fuel-injection pump

BOSCH 9 410 613 320 9410613320
ZEXEL 106068-2553 1060682553
MITSUBISHI-HEAV 34A6524270 34a6524270
106068-2553 FUEL-INJECTION PUMP
Rating:
69
Buy FUEL-INJECTION PUMP 106068-2553 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

PUMP HOUSING
1. [1] 134070-0720 PUMP HOUSING
1/30. [3] 029040-6020 STUD
1/45. [1] 134311-0000 SPACER RING
1/50. [12] 134138-0100 STUD
7. [4] 134147-6420 PLUNGER-AND-BARREL ASSY
7/1. [1] 134173-2520 PLUNGER-AND-BARREL ASSY
7/3. [1] 134160-5720 DELIVERY-VALVE ASSEMBLY
7/4. [1] 134171-0320 FITTING
7/5. [1] 016500-1850 O-RING
7/6. [1] 134117-1700 FILLER PIECE
7/7. [1] 134112-2200 COILED SPRING
7/8. [1] 134115-0300 GASKET
7/10. [1] 134135-0300 CAPSULE
7/11. [1] 029602-0010 LOCKING WASHER
7/13. [1] 139727-0300 O-RING
7/14. [1] 139715-0200 O-RING
7/15. [1] 139715-0200 O-RING
7B. [2] 134147-6520 PLUNGER-AND-BARREL ASSY
7B/1. [1] 134173-2620 PLUNGER-AND-BARREL ASSY
7B/3. [1] 134160-5720 DELIVERY-VALVE ASSEMBLY
7B/4. [1] 134171-0320 FITTING
7B/5. [1] 016500-1850 O-RING
7B/6. [1] 134117-1700 FILLER PIECE
7B/7. [1] 134112-2200 COILED SPRING
7B/8. [1] 134115-0300 GASKET
7B/10. [1] 134135-0300 CAPSULE
7B/11. [1] 029602-0010 LOCKING WASHER
7B/13. [1] 139727-0300 O-RING
7B/14. [1] 139715-0200 O-RING
7B/15. [1] 139715-0200 O-RING
23/1. [0] 139400-0900 SHIM T0.500
23/1. [0] 139400-1000 SHIM T0.525
23/1. [0] 139400-1000 SHIM T0.525
23/1. [0] 139400-1000 SHIM T0.525
23/1. [0] 139400-1000 SHIM T0.525
23/1. [0] 139400-1100 SHIM T0.550
23/1. [0] 139400-1200 SHIM T0.575
23/1. [0] 139400-1300 SHIM T0.600
23/1. [0] 139400-1400 SHIM T0.625
23/1. [0] 139400-1500 SHIM T0.650
23/1. [0] 139400-1600 SHIM T0.675
23/1. [0] 139400-1700 SHIM T0.700
23/1. [0] 139400-1800 SHIM T0.725
23/1. [0] 139400-1900 SHIM T0.750
23/1. [0] 139400-2000 SHIM T0.775
23/1. [0] 139400-2100 SHIM T0.800
23/1. [0] 139400-2200 SHIM T0.825
23/1. [0] 139400-2300 SHIM T0.850
23/1. [0] 139400-2400 SHIM T0.875
23/1. [0] 139400-2500 SHIM T0.900
23/1. [0] 139400-2600 SHIM T0.925
23/1. [0] 139400-2700 SHIM T0.950
23/1. [0] 139400-2800 SHIM T0.975
23/1. [0] 139400-2900 SHIM T1.000
23/1. [0] 139400-3000 SHIM T1.025
23/1. [0] 139400-3100 SHIM T1.050
23/1. [0] 139400-3200 SHIM T1.075
23/1. [0] 139400-3300 SHIM T1.100
23/1. [0] 139400-3400 SHIM T1.125
23/1. [0] 139400-3500 SHIM T1.150
23/1. [0] 139400-3600 SHIM T1.175
23/1. [0] 139400-3700 SHIM T1.200
23/1. [0] 139400-3800 SHIM T1.225
23/1. [0] 139400-3900 SHIM T1.250
23/1. [0] 139400-4000 SHIM T1.275
23/1. [0] 139400-4100 SHIM T1.300
23/1. [0] 139400-4200 SHIM T1.325
23/1. [0] 139400-4300 SHIM T1.350
23/1. [0] 139400-4400 SHIM T1.375
23/1. [0] 139400-4500 SHIM T1.400
23/1. [0] 139400-4600 SHIM T1.425
23/1. [0] 139400-4700 SHIM T1.450
23/1. [0] 139400-4800 SHIM T1.475
23/1. [0] 139400-4900 SHIM T1.500
23/1. [0] 139400-5000 SHIM T1.525
23/1. [0] 139400-5100 SHIM T1.550
23/1. [0] 139400-5200 SHIM T1.575
23/1. [0] 139400-5300 SHIM T1.600
23/1. [0] 139400-5400 SHIM T1.625
23/1. [0] 139400-5500 SHIM T1.650
23/1. [0] 139400-5600 SHIM T1.675
23/1. [0] 139400-5700 SHIM T1.700
23/1. [0] 139400-5800 SHIM T1.725
23/1. [0] 139400-5900 SHIM T1.750
23/1. [0] 139400-6000 SHIM T1.775
23/1. [0] 139400-6100 SHIM T1.800
23/1. [0] 139400-6200 SHIM T1.825
23/1. [0] 139400-6300 SHIM T1.850
23/1. [0] 139400-6400 SHIM T1.875
23/1. [0] 139400-6500 SHIM T1.900
23/1. [0] 139400-6600 SHIM T1.925
23/1. [0] 139400-6700 SHIM T1.950
23/1. [0] 139400-6800 SHIM T1.975
24. [12] 134132-0300 PLAIN WASHER D20&11T2.5
26. [12] 139210-0200 UNION NUT
30. [2] 134001-0000 BUSHING
30. [2] 134001-0000 BUSHING
32. [1] 134256-0000 CONTROL RACK
33. [1] 024030-2030 BEARING PIN
34. [1] 134222-0000 BUSHING
41. [6] 134241-0620 CONTROL SLEEVE
43. [6] 134216-0000 SLOTTED WASHER
44. [6] 134215-0800 COMPRESSION SPRING
45. [6] 134217-0700 SLOTTED WASHER
46. [6] 134563-2700 SPRING SEAT
47. [4] 134200-0820 TAPPET
47/2. [1] 134204-0200 ROLLER
47/3. [1] 134203-0000 BEARING PIN
47/4. [1] 131206-0500 SLIDER
48. [2] 134200-0720 TAPPET
48/2. [1] 134204-0200 ROLLER
48/3. [1] 134203-0000 BEARING PIN
48/4. [1] 131206-0500 SLIDER
59. [1] 016650-2230 BEARING PLATE
64. [1] 134303-0500 SHIM D59.8&43T1.6
67. [4] 139006-4200 BLEEDER SCREW
71. [1] 134340-1300 CAMSHAFT
74. [1] 134306-1000 BEARING SHELL
75. [2] 020106-2040 BLEEDER SCREW M6P1L20
76. [2] 134306-1100 BEARING SHELL
77. [4] 020106-2040 BLEEDER SCREW M6P1L20
79. [1] 035302-0600 BEARING PLATE
80. [1] 134316-3300 COVER
81. [1] 139634-0200 PACKING RING
82/1. [0] 134314-0700 SHIM T0.1
82/1. [0] 134314-0800 SHIM T0.12
82/1. [0] 134314-0900 SHIM T0.14
82/1. [0] 134314-1000 SHIM T0.16
82/1. [0] 134314-1100 SHIM T0.18
82/1. [0] 134314-1200 SHIM T0.3
82/1. [0] 134314-1300 SHIM T0.5
83. [1] 139766-0200 O-RING
84. [1] 134563-2500 SLIDING PIECE
85. [1] 134043-0800 COVER
86. [1] 134042-1400 GASKET
87. [12] 012206-1640 FLAT-HEAD SCREW M6P1L16
88. [1] 134045-0100 CAPSULE
89. [1] 026524-2940 GASKET D28.9&24.3T2
93. [3] 139206-0400 UNION NUT
95. [1] 131041-0800 GASKET
96. [6] 134047-0000 CAPSULE
98. [1] 025806-2210 WOODRUFF KEY
118. [1] 134496-3400 POINTER
119. [2] 020006-1240 BLEEDER SCREW M6P1L12 4T
132. [1] 029731-4680 EYE BOLT
133. [2] 029341-4130 GASKET D20&13.8T2*
141. [1] 134433-4820 PIPE
142. [1] 029731-0490 EYE BOLT
143. [3] 029341-0110 GASKET
152. [1] 131424-3420 OVER FLOW VALVE
153. [2] 029341-4130 GASKET D20&13.8T2*
162. [1] 029731-4570 EYE BOLT
163. [2] 029341-4130 GASKET D20&13.8T2*
172. [1] 131420-0400 BLEEDER SCREW
173. [1] 026506-1040 GASKET D9.9&6.2T1
186. [1] 134510-8220 BRACKET

Include in #1:

106681-4400 as FUEL INJECTION PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
106068-2553 
106068-2554 
9 410 613 320 
34A6524270  MITSUBISHI-HEAV
FUEL-INJECTION PUMP
* Q




Information:

Engine Mounts
Inspect
Inspect the engine mounts for deterioration and proper bolt torque. Engine vibration may be caused by improper engine mounting and/or engine mount deterioration. Any engine mount showing deterioration should be replaced. Refer to the Torque Specifications section of this publication for recommended bolt torque values. See the Marine Engine Application and Installation Guide for more information.Crankshaft Vibration Damper
Inspect
Damage to, or failure of, the crankshaft vibration damper will increase torsional vibrations and result in damage to the crankshaft and other engine components. A deteriorating damper will cause excessive gear train noise at variable points in the speed range.The damper is mounted to the crankshaft, located behind the belt guard on the front of the engine.Removal and Installation
Refer to the Service Manual for the damper removal procedure and for the damper installation procedure.Visconic Damper
The visconic damper has a weight, located inside a fluid filled case. The weight moves in the case to limit torsional vibration. Inspect the damper for evidence of dents, cracks or leaks of the fluid.Replace the damper if the damper is dented, cracked, or leaking. Refer to the Service Manual or contact your Caterpillar dealer for damper replacement.Valve Lash
Check/Adjust
Initial valve lash adjustment on new, rebuilt or remanufactured engines is recommended at the first scheduled oil change interval due to initial wear and seating of valve train components.Subsequent adjustments should be made at Every 3000 Hour interval.This maintenance is recommended by Caterpillar as part of a lubrication and preventive maintenance schedule to provide maximum engine life.
Only qualified service personnel should perform this maintenance. Refer to the Service Manual or your Caterpillar dealer for the complete valve lash adjustment procedure.
Be sure the engine cannot be started while this maintenance is being performed. To prevent possible injury, do not use the starting motor to turn the flywheel.Hot engine components can cause burns. Allow additional time for the engine to cool before measuring/adjusting valve lash clearance.
Operation of Caterpillar engines with improper valve adjustments will reduce engine efficiency. This reduced efficiency could result in excessive fuel usage and/or shortened engine component life.
Valve Rotators
When inspecting the valve rotators, protective glasses or face shield and protective clothing must be worn, to prevent being burned by hot oil or spray.
A valve rotator which does not operate properly will accelerate valve face wear and valve seat wear and shorten valve life. If a damaged rotator is not replaced, valve face guttering could result and cause pieces of the valve to fall into the cylinder. This can cause piston and cylinder head damage.
After setting the valve lash and before installing the valve covers:1. Start the engine. Follow the engine starting procedure in this manual. Operate the engine at low idle.2. Observe the top surface of each valve rotator. Each valve rotator should turn slightly each time the valve closes.If a valve fails to rotate, contact your Caterpillar dealer.Fuel Ratio Control, Set Point, and Low Idle
Check/Adjust
The fuel ratio control limits the amount of fuel to the cylinders during acceleration. This affects the amount of exhaust smoke. The

Have questions with 106068-2553?





Group cross 106068-2553 ZEXEL

106068-2550  

106068-2551 
9 410 611 573 
 
FUEL-INJECTION PUMP
106068-2551  

106068-2552 
9 410 613 009 
 
FUEL-INJECTION PUMP
106068-2552  

106068-2553 
9 410 610 542 
 
FUEL-INJECTION PUMP

Mitsubishi-Heav 

106068-2553  

106068-2554 
9 410 613 320 
34A6524270 
FUEL-INJECTION PUMP
106068-2554  
9 410 613 488 
NP-PE6P130/321LS7S 
 
FUEL-INJECTION PUMP
Back to top