106067-8160 ZEXEL 9 410 613 962 BOSCH FUEL-INJECTION PUMP 9410613962 1060678160


 

Information fuel-injection pump

BOSCH 9 410 613 962 9410613962
ZEXEL 106067-8160 1060678160
106067-8160 FUEL-INJECTION PUMP
Rating:
15
Buy FUEL-INJECTION PUMP 106067-8160 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 134000-6620
5. [6] 134130-8820 PLUNGER-AND-BARREL ASSY
5/1. [1] 134131-1100 FLANGE BUSHING
5/2. [1] 029331-9040 GASKET
5/3. [1] 134101-2920 PLUNGER-AND-BARREL ASSY
5/4. [1] 134563-0600 BEARING PIN
5/5. [1] 134110-7220 DELIVERY-VALVE ASSEMBLY
5/6. [1] 134116-1400 FITTING
5/7. [1] 029632-5070 O-RING
5/8. [1] 134117-0500 FILLER PIECE
5/9. [1] 134112-0200 COILED SPRING
5/10. [1] 134115-0100 GASKET
5/11. [1] 029632-9030 O-RING
5/12. [1] 029632-9030 O-RING
17/1. [0] 134139-2400 SHIM T0.15
17/1. [0] 134139-2500 SHIM T0.4
17/1. [0] 134139-2600 SHIM T0.5
17/1. [0] 134139-2700 SHIM T0.6
17/1. [0] 134139-2800 SHIM T0.7
17/1. [0] 134139-2900 SHIM T0.8
17/1. [0] 134139-3000 SHIM T0.9
17/1. [0] 134139-3100 SHIM T1.0
18. [12] 029301-2330 PLAIN WASHER
19. [12] 014111-2440 LOCKING WASHER D21.5&12.2T3
20. [12] 013021-2140 UNION NUT M12P1.75H10
21. [1] 134256-2000 CONTROL RACK
22. [1] 134226-0000 FLAT-HEAD SCREW
23. [1] 134510-3900 GASKET
24. [1] 134222-0100 BUSHING
25. [6] 134215-0100 COMPRESSION SPRING
26. [6] 134217-0200 SLOTTED WASHER
27. [6] 134200-0120 TAPPET
27/2. [1] 134203-0100 BEARING PIN
27/3. [1] 134204-0000 ROLLER
27/4. [1] 134205-0000 BUSHING
27/5. [1] 134213-0000 BEARING PIN
28. [6] 134140-0400 SPRING SEAT D14T3.9
30. [1] 016650-2230 BEARING PLATE
34/1. [0] 134303-0000 SHIM D59.8&43T1.2
34/1. [0] 134303-0100 SHIM D59.8&43T1.5
34/1. [0] 134303-0200 SHIM D59.8&43T1.8
34/1. [0] 134303-0300 SHIM D59.8&43T2.0
34/1. [0] 134303-0400 SHIM D59.8&43T0.6
35. [4] 029050-6360 FLAT-HEAD SCREW
36. [1] 134371-0100 CAMSHAFT
37. [1] 134305-0000 BEARING SHELL
38. [2] 029020-6140 HEX-SOCKET-HEAD CAP SCREW
39. [2] 134510-3900 GASKET
40. [1] 016650-2230 BEARING PLATE
41. [1] 134316-0200 COVER
42. [1] 026712-5010 PACKING RING
43/1. [0] 134314-0000 SHIM T0.1
43/1. [0] 134314-0100 SHIM T0.12
43/1. [0] 134314-0200 SHIM T0.14
43/1. [0] 134314-0300 SHIM T0.16
43/1. [0] 134314-0400 SHIM T0.18
43/1. [0] 134314-0500 SHIM T0.3
43/1. [0] 134314-0600 SHIM T0.5
44. [1] 029635-5010 O-RING
50. [3] 139206-0400 UNION NUT
52. [1] 025805-1910 WOODRUFF KEY
53. [1] 014111-8410 LOCKING WASHER
54. [1] 139218-0000 UNION NUT
56. [1] 134416-1500 COVER
57. [2] 014530-6540 TAB WASHER
58. [2] 021306-3940 FLAT-HEAD SCREW
67. [1] 029111-4050 CAPSULE
68. [1] 029341-4130 GASKET D20&13.8T2*
75. [1] 029731-4080 EYE BOLT
76. [2] 029341-4130 GASKET D20&13.8T2*
82. [1] 134420-0020 BLEEDER SCREW
84. [1] 026514-1840 GASKET D17.9&14.2T1
96. [1] 029639-0020 O-RING
121. [1] 029633-1010 O-RING
124. [4] 029320-6010 LOCKING WASHER
125. [4] 029300-6170 SHIM D12&6.2T1
126. [4] 029340-6120 GASKET
138. [1] 029731-4080 EYE BOLT
139. [2] 029341-4130 GASKET D20&13.8T2*
140. [1] 134433-1720 PIPE
141. [1] 029731-4080 EYE BOLT
142. [2] 029341-4130 GASKET D20&13.8T2*
144. [2] 014110-8440 LOCKING WASHER
145. [2] 010038-2040 BLEEDER SCREW M8P1.25L20

Include in #1:

106672-4330 as FUEL INJECTION PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
106067-8160 
106067-8161 
9 410 613 962 
NP-PES6PD120A410RN8 
   
FUEL-INJECTION PUMP
* Q




Information:

Burn Prevention
Do not touch any part of an operating engine. Allow the engine to cool before any repair or maintenance is performed on the engine.Relieve all pressure in air, oil, fuel or cooling systems before any lines, fittings or related items are disconnected or removed.Coolant
To prevent personal injury, do not step up on engine to remove the filler cap, if applicable. Use an adequate ladder.At operating temperature, the engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot water. When pressure is relieved rapidly, this hot water can turn into steam.Allow cooling system components to cool before draining. Any contact with hot water or steam can cause severe burns.Check the coolant level only after the engine has been stopped and the filler cap is cool enough to remove with your bare hand. Remove the cooling system filler cap slowly to relieve pressure.Cooling system supplemental additive contains alkali. To prevent personal injury, avoid contact with the skin and eyes and do not drink.Oils
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.Batteries
Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes. Wash hands after touching batteries and connectors. Use of gloves is recommended. Always wear protective glasses when working with batteries.Batteries give off flammable fumes which can explode. Always thaw a frozen battery before jump starting. Frozen batteries can explode. Do not smoke when observing the battery electrolyte levels.Fire or Explosion Prevention
Determine whether the engine will be operated in an environment in which combustible gases could be drawn through the air inlet system. These gases could cause the engine to overspeed, which in turn could seriously damage the engine and result in bodily injury or property damage.If your application involves the presence of combustible gases, consult your Caterpillar dealer to obtain additional information concerning protection devices suitable for the application involved.Inhaling freon gas through a lit cigarette or other smoking method, or inhaling fumes released from a flame contacting freon could cause bodily harm or death. Do not smoke when servicing, charging or working around air conditioners or where freon gas may be present.All fuels, most lubricants and some coolant mixtures are flammable. Diesel fuel is flammable. Gasoline is flammable. The mixture of diesel and gasoline fumes are extremely explosive.Do not smoke while refueling or in a refueling area.Do not smoke in areas where batteries are charged, or where flammable materials are stored.Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Remove all flammable materials such as fuel, oil and other debris before they accumulate on the truck engine.Do not expose the engine to flames, burning brush, etc., if

Have questions with 106067-8160?





Group cross 106067-8160 ZEXEL

9 410 613 246 
NP-PES6PD120A410RN6 
 
FUEL-INJECTION PUMP
9 410 610 151 
NP-PES6PD120A410RN6 
 
FUEL-INJECTION PUMP
106067-8160  

106067-8161 
9 410 613 962 
NP-PES6PD120A410RN8 
 
FUEL-INJECTION PUMP
9 410 610 074 
NP-PES6PD120A410RN8 
 
FUEL-INJECTION PUMP
9 410 613 963 
NP-PES6PD120A410RN9 
 
FUEL-INJECTION PUMP
9 410 613 247 
NP-PES6PD120A410RN10 
 
FUEL-INJECTION PUMP
9 410 611 325 
NP-PES6PD120A410RN10 
 
FUEL-INJECTION PUMP
9 410 610 179 
 
FUEL-INJECTION PUMP
9 410 610 234 
NP-PES6PD120/410RN25 
 
FUEL-INJECTION PUMP
Back to top