Fuel injectors
  1. Home
  2. fuel
  3. #1060670990

106067-0990 ZEXEL 9 410 610 815 BOSCH FUEL-INJECTION PUMP 9410610815 1060670990 1156103140


 

Information fuel-injection pump

BOSCH 9 410 610 815 9410610815
ZEXEL 106067-0990 1060670990
ISUZU 1156103140 1156103140
106067-0990 FUEL-INJECTION PUMP
Rating:
37
Buy FUEL-INJECTION PUMP 106067-0990 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

PUMP HOUSING
1. [1] 134051-2520 PUMP HOUSING
1/11. [1] 134026-0000 CAPSULE
1/30. [3] 029040-6020 STUD
1/45. [1] 134311-0000 SPACER RING
1/50. [12] 134138-0000 STUD
7. [6] 134165-4220 PLUNGER-AND-BARREL ASSY
7/1. [6] 134131-1920 FLANGE BUSHING
7/2. [6] 134153-6720 PLUNGER-AND-BARREL ASSY
7/3. [6] 134110-4220 DELIVERY-VALVE ASSEMBLY
7/4. [6] 134116-4400 FITTING
7/5. [6] 139722-0400 O-RING
7/6. [6] 131117-2100 FILLER PIECE
7/7. [6] 131112-2300 COILED SPRING
7/8. [6] 134115-0100 GASKET
7/9. [6] 029302-0140 PLAIN WASHER
7/10. [6] 134135-0200 CAPSULE
7/11. [6] 029602-0010 LOCKING WASHER
7/12. [6] 134137-0100 SPACER RING
7/13. [6] 139729-0400 O-RING
7/14. [6] 139715-0400 O-RING
7/15. [6] 139715-0400 O-RING
23/1. [0] 139400-0900 SHIM T0.500
23/1. [0] 139400-0900 SHIM T0.500
23/1. [0] 139400-1000 SHIM T0.525
23/1. [0] 139400-1100 SHIM T0.550
23/1. [0] 139400-1200 SHIM T0.575
23/1. [0] 139400-1300 SHIM T0.600
23/1. [0] 139400-1400 SHIM T0.625
23/1. [0] 139400-1500 SHIM T0.650
23/1. [0] 139400-1600 SHIM T0.675
23/1. [0] 139400-1700 SHIM T0.700
23/1. [0] 139400-1800 SHIM T0.725
23/1. [0] 139400-1900 SHIM T0.750
23/1. [0] 139400-2000 SHIM T0.775
23/1. [0] 139400-2100 SHIM T0.800
23/1. [0] 139400-2200 SHIM T0.825
23/1. [0] 139400-2300 SHIM T0.850
23/1. [0] 139400-2400 SHIM T0.875
23/1. [0] 139400-2500 SHIM T0.900
23/1. [0] 139400-2600 SHIM T0.925
23/1. [0] 139400-2700 SHIM T0.950
23/1. [0] 139400-2800 SHIM T0.975
23/1. [0] 139400-2900 SHIM T1.000
23/1. [0] 139400-3000 SHIM T1.025
23/1. [0] 139400-3100 SHIM T1.050
23/1. [0] 139400-3200 SHIM T1.075
23/1. [0] 139400-3300 SHIM T1.100
23/1. [0] 139400-3400 SHIM T1.125
23/1. [0] 139400-3500 SHIM T1.150
23/1. [0] 139400-3600 SHIM T1.175
23/1. [0] 139400-3700 SHIM T1.200
23/1. [0] 139400-3800 SHIM T1.225
23/1. [0] 139400-3900 SHIM T1.250
23/1. [0] 139400-4000 SHIM T1.275
23/1. [0] 139400-4100 SHIM T1.300
23/1. [0] 139400-4200 SHIM T1.325
23/1. [0] 139400-4300 SHIM T1.350
23/1. [0] 139400-4400 SHIM T1.375
23/1. [0] 139400-4500 SHIM T1.400
23/1. [0] 139400-4600 SHIM T1.425
23/1. [0] 139400-4700 SHIM T1.450
23/1. [0] 139400-4800 SHIM T1.475
23/1. [0] 139400-4900 SHIM T1.500
23/1. [0] 139400-5000 SHIM T1.525
23/1. [0] 139400-5100 SHIM T1.550
23/1. [0] 139400-5200 SHIM T1.575
23/1. [0] 139400-5300 SHIM T1.600
23/1. [0] 139400-5400 SHIM T1.625
23/1. [0] 139400-5500 SHIM T1.650
23/1. [0] 139400-5600 SHIM T1.675
23/1. [0] 139400-5700 SHIM T1.700
23/1. [0] 139400-5800 SHIM T1.725
23/1. [0] 139400-5900 SHIM T1.750
23/1. [0] 139400-6000 SHIM T1.775
23/1. [0] 139400-6100 SHIM T1.800
23/1. [0] 139400-6200 SHIM T1.825
23/1. [0] 139400-6300 SHIM T1.850
23/1. [0] 139400-6400 SHIM T1.875
23/1. [0] 139400-6500 SHIM T1.900
23/1. [0] 139400-6600 SHIM T1.925
23/1. [0] 139400-6700 SHIM T1.950
23/1. [0] 139400-6800 SHIM T1.975
24. [12] 134132-0300 PLAIN WASHER D20&11T2.5
26. [12] 013021-0040 UNION NUT M10P1.5H8
30. [2] 134001-0000 BUSHING
30. [2] 134001-0000 BUSHING
32. [1] 134256-3000 CONTROL RACK
33. [1] 024030-2030 BEARING PIN
34. [1] 134222-0000 BUSHING
41. [6] 134241-0021 CONTROL SLEEVE
43. [6] 134216-0000 SLOTTED WASHER
44. [6] 134215-0400 COMPRESSION SPRING
45. [6] 134217-0500 SLOTTED WASHER
47. [6] 134200-0020 TAPPET
47/2. [1] 134204-0000 ROLLER
47/3. [1] 134205-0000 BUSHING
47/4. [1] 134203-0000 BEARING PIN
47/5. [1] 131206-0500 SLIDER
59. [1] 016650-2230 BEARING PLATE
64/1. [0] 134303-0000 SHIM D59.8&43T1.2
64/1. [0] 134303-0100 SHIM D59.8&43T1.5
64/1. [0] 134303-0200 SHIM D59.8&43T1.8
64/1. [0] 134303-0300 SHIM D59.8&43T2.0
64/1. [0] 134303-0400 SHIM D59.8&43T0.6
67. [4] 029010-6810 BLEEDER SCREW
71. [1] 134371-3500 CAMSHAFT
74. [1] 134306-0100 BEARING SHELL
75. [2] 020106-2040 BLEEDER SCREW M6P1L20
79. [1] 016650-2230 BEARING PLATE
80. [1] 134316-1700 COVER
81. [1] 139625-0000 PACKING RING
82/1. [0] 134314-0000 SHIM T0.1
82/1. [0] 134314-0100 SHIM T0.12
82/1. [0] 134314-0200 SHIM T0.14
82/1. [0] 134314-0300 SHIM T0.16
82/1. [0] 134314-0400 SHIM T0.18
82/1. [0] 134314-0500 SHIM T0.3
82/1. [0] 134314-0600 SHIM T0.5
83. [1] 029635-5010 O-RING
84. [1] 134563-0900 SLIDING PIECE
85. [1] 134043-0800 COVER
86. [1] 134042-1400 GASKET
87. [12] 012206-1640 FLAT-HEAD SCREW M6P1L16
88. [1] 134045-0100 CAPSULE
89. [1] 026524-2940 GASKET D28.9&24.3T2
93. [3] 139206-0400 UNION NUT
95. [1] 131041-0800 GASKET
96. [6] 134047-0000 CAPSULE
98. [1] 029470-5010 WOODRUFF KEY
118. [1] 134496-0600 POINTER
119. [2] 020006-1240 BLEEDER SCREW M6P1L12 4T

Include in #1:

106671-6060 as FUEL INJECTION PUMP
106671-6061

Cross reference number

Zexel num
Bosch num
Firm num
Name
106067-0990 
9 410 610 815 
NP-PE6P120/721RS3000 
1156103140  ISUZU
FUEL-INJECTION PUMP
Q 14CA FUEL INJECTION PUMP PE6P,6PD PE




Information:

Start By:a. remove oil pumpb. remove oil pan plate
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Turn the crankshaft until two pistons are at the bottom center. Remove connecting rod caps (1) from the two connecting rods. Remove the lower half of the rod bearing from the rod bearing cap.
The connecting rod bolts are loose on the connecting rods and can fall out when the nuts are removed.
2. Push the connecting rods away from the crankshaft. Remove the upper half of the rod bearing from the connecting rod. Install the connecting rod bearings dry when the clearance checks are made. Put clean engine oil on the connecting rod bearings for final assembly.3. Install the upper half of the rod bearing in the connecting rod.4. Install the lower half of the rod bearing in the connecting rod cap. Be sure the tabs in the back of the connecting rod bearings are in the tab grooves of the connecting rod and cap. 5. Use Plastigage (A) to check the connecting rod bearing clearance.6. Put Plastigage (A) on the connecting rod bearing.7. Put 2P2506 Thread Lubricant on the threads of the rod bolts and seat surfaces of the nuts.
When connecting rod caps are installed, make sure the number on the side of the cap is next to and respective with the number on the side of the connecting rod.
Do not turn the crankshaft when Plastigage (A) is in position.
Do not use an impact wrench to tighten the nuts the additional 90°.
8. Install connecting rod cap (1). Install the nuts. Tighten the nuts to a torque of 40 4 N m (30 3 lb ft). Put a mark on each nut and the end of each bolt. Tighten the nuts 90° more. Remove the connecting rod caps. Remove Plastigage (A) and measure the width of the Plastigage. The connecting rod clearance must be 0.076 to 0.168 mm (.0030 to .0066 in) for new bearings. The maximum clearance with used bearings is 0.25 mm (.010 in).9. Install the connecting rod caps and tighten the nuts as in Step 8.10. Do Steps 1 through 9 for the remainder of the connecting rod bearings.End By:a. install oil pan plateb. install oil pump

Have questions with 106067-0990?





Group cross 106067-0990 ZEXEL

Mitsubishi-Heav 

106067-0900  
9 410 610 541 
3626514210 
FUEL-INJECTION PUMP
106067-0910  
9 410 614 183 
 
FUEL-INJECTION PUMP
106067-0920  
9 410 610 999 
 
FUEL-INJECTION PUMP
106067-0930  
9 410 611 000 
 
FUEL-INJECTION PUMP

Mitsubishi-Heav 

106067-0940  
9 410 612 989 
3256524320 
FUEL-INJECTION PUMP
106067-0950  
9 410 613 993 
 
FUEL-INJECTION PUMP
106067-0960  
9 410 612 990 
 
FUEL-INJECTION PUMP
106067-0970  
9 410 613 986 
 
FUEL-INJECTION PUMP
106067-0980  
9 410 614 086 
 
FUEL-INJECTION PUMP

Isuzu 

106067-0990  
9 410 610 815 
NP-PE6P120/721RS3000 
1156103140 
FUEL-INJECTION PUMP
Back to top