Fuel injectors
  1. Home
  2. fuel
  3. #1060661320

106066-1320 ZEXEL 9 410 610 446 BOSCH FUEL-INJECTION PUMP 9410610446 1060661320


 

Information fuel-injection pump

BOSCH 9 410 610 446 9410610446
ZEXEL 106066-1320 1060661320
106066-1320 FUEL-INJECTION PUMP
Rating:
51
Buy FUEL-INJECTION PUMP 106066-1320 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

PUMP HOUSING
1. [1] 134050-8721 PUMP HOUSING
1/2. [1] 131400-0100 ADAPTOR
1/3. [1] 131400-0100 ADAPTOR
1/11. [1] 134026-0000 CAPSULE
1/30. [3] 029040-6020 STUD
1/45. [1] 134311-0000 SPACER RING
1/50. [12] 134138-0000 STUD
7. [6] 134144-5020 PLUNGER-AND-BARREL ASSY
7/1. [6] 134131-1020 FLANGE BUSHING
7/2. [6] 134101-1520 PLUNGER-AND-BARREL ASSY
7/3. [6] 134110-0920 DELIVERY-VALVE ASSEMBLY
7/4. [6] 134116-0700 FITTING
7/5. [6] 029632-2070 O-RING
7/6. [6] 134117-0500 FILLER PIECE
7/7. [6] 132112-0200 COILED SPRING
7/8. [6] 134115-0100 GASKET
7/9. [6] 029302-0140 PLAIN WASHER
7/10. [6] 134135-0200 CAPSULE
7/11. [6] 029602-0010 LOCKING WASHER
7/12. [6] 134137-0100 SPACER RING
7/13. [6] 029632-9030 O-RING
7/14. [6] 029631-5020 O-RING
7/15. [6] 029631-5020 O-RING
23/1. [0] 139400-0900 SHIM T0.500
23/1. [0] 139400-1000 SHIM T0.525
23/1. [0] 139400-1100 SHIM T0.550
23/1. [0] 139400-1200 SHIM T0.575
23/1. [0] 139400-1300 SHIM T0.600
23/1. [0] 139400-1400 SHIM T0.625
23/1. [0] 139400-1500 SHIM T0.650
23/1. [0] 139400-1600 SHIM T0.675
23/1. [0] 139400-1700 SHIM T0.700
23/1. [0] 139400-1800 SHIM T0.725
23/1. [0] 139400-1900 SHIM T0.750
23/1. [0] 139400-2000 SHIM T0.775
23/1. [0] 139400-2100 SHIM T0.800
23/1. [0] 139400-2200 SHIM T0.825
23/1. [0] 139400-2300 SHIM T0.850
23/1. [0] 139400-2400 SHIM T0.875
23/1. [0] 139400-2500 SHIM T0.900
23/1. [0] 139400-2600 SHIM T0.925
23/1. [0] 139400-2700 SHIM T0.950
23/1. [0] 139400-2800 SHIM T0.975
23/1. [0] 139400-2900 SHIM T1.000
23/1. [0] 139400-3000 SHIM T1.025
23/1. [0] 139400-3100 SHIM T1.050
23/1. [0] 139400-3200 SHIM T1.075
23/1. [0] 139400-3300 SHIM T1.100
23/1. [0] 139400-3400 SHIM T1.125
23/1. [0] 139400-3500 SHIM T1.150
23/1. [0] 139400-3600 SHIM T1.175
23/1. [0] 139400-3700 SHIM T1.200
23/1. [0] 139400-3800 SHIM T1.225
23/1. [0] 139400-3900 SHIM T1.250
23/1. [0] 139400-4000 SHIM T1.275
23/1. [0] 139400-4100 SHIM T1.300
23/1. [0] 139400-4200 SHIM T1.325
23/1. [0] 139400-4300 SHIM T1.350
23/1. [0] 139400-4400 SHIM T1.375
23/1. [0] 139400-4500 SHIM T1.400
23/1. [0] 139400-4600 SHIM T1.425
23/1. [0] 139400-4700 SHIM T1.450
23/1. [0] 139400-4800 SHIM T1.475
23/1. [0] 139400-4900 SHIM T1.500
23/1. [0] 139400-5000 SHIM T1.525
23/1. [0] 139400-5100 SHIM T1.550
23/1. [0] 139400-5200 SHIM T1.575
23/1. [0] 139400-5300 SHIM T1.600
23/1. [0] 139400-5400 SHIM T1.625
23/1. [0] 139400-5500 SHIM T1.650
23/1. [0] 139400-5600 SHIM T1.675
23/1. [0] 139400-5700 SHIM T1.700
23/1. [0] 139400-5800 SHIM T1.725
23/1. [0] 139400-5900 SHIM T1.750
23/1. [0] 139400-6000 SHIM T1.775
23/1. [0] 139400-6100 SHIM T1.800
23/1. [0] 139400-6200 SHIM T1.825
23/1. [0] 139400-6300 SHIM T1.850
23/1. [0] 139400-6400 SHIM T1.875
23/1. [0] 139400-6500 SHIM T1.900
23/1. [0] 139400-6600 SHIM T1.925
23/1. [0] 139400-6700 SHIM T1.950
23/1. [0] 139400-6800 SHIM T1.975
23/1. [0] 139400-6800 SHIM T1.975
24. [12] 134132-0300 PLAIN WASHER D20&11T2.5
26. [12] 013021-0040 UNION NUT M10P1.5H8
30. [2] 134001-0000 BUSHING
30. [2] 134001-0000 BUSHING
32. [1] 134256-1620 CONTROL RACK
33. [1] 024030-2030 BEARING PIN
34. [1] 134222-0000 BUSHING
41. [6] 134241-0021 CONTROL SLEEVE
43. [6] 134216-0000 SLOTTED WASHER
44. [6] 134215-0300 COMPRESSION SPRING
45. [6] 134217-0500 SLOTTED WASHER
47. [6] 134200-0020 TAPPET
47/2. [1] 134204-0000 ROLLER
47/3. [1] 134205-0000 BUSHING
47/4. [1] 134203-0000 BEARING PIN
47/5. [1] 131206-0500 SLIDER
59. [1] 016650-2230 BEARING PLATE
59B. [1] 028222-5010 BEARING PLATE
64/1. [0] 134303-0000 SHIM D59.8&43T1.2
64/1. [0] 134303-0100 SHIM D59.8&43T1.5
64/1. [0] 134303-0200 SHIM D59.8&43T1.8
64/1. [0] 134303-0300 SHIM D59.8&43T2.0
64/1. [0] 134303-0400 SHIM D59.8&43T0.6
67. [4] 029010-6810 BLEEDER SCREW
71. [1] 134370-0000 CAMSHAFT
74. [1] 134306-0000 BEARING SHELL
75. [2] 020106-2040 BLEEDER SCREW M6P1L20
79. [1] 016650-2230 BEARING PLATE
79B. [1] 028222-5010 BEARING PLATE
80. [1] 134330-0000 COVER
81. [1] 029622-0140 PACKING RING
82/1. [0] 134314-0000 SHIM T0.1
82/1. [0] 134314-0100 SHIM T0.12
82/1. [0] 134314-0200 SHIM T0.14
82/1. [0] 134314-0300 SHIM T0.16
82/1. [0] 134314-0400 SHIM T0.18
82/1. [0] 134314-0500 SHIM T0.3
82/1. [0] 134314-0600 SHIM T0.5
83. [1] 029635-5010 O-RING
85. [1] 134043-0800 COVER
86. [1] 134042-1400 GASKET
87. [12] 012206-1640 FLAT-HEAD SCREW M6P1L16
88. [1] 134045-0100 CAPSULE
89. [1] 026524-2940 GASKET D28.9&24.3T2
93. [3] 139206-0400 UNION NUT
95. [1] 131041-0800 GASKET
96. [6] 134047-0000 CAPSULE
98. [1] 025804-1610 WOODRUFF KEY
111. [1] 134416-0100 COVER
112. [2] 014530-6540 TAB WASHER
113. [2] 021306-3010 FLAT-HEAD SCREW
118. [1] 134496-0800 POINTER
119. [2] 020006-1640 BLEEDER SCREW M6P1L16 4T
120/1. [0] 139400-0100 SHIM T0.2
120/1. [0] 139400-0200 SHIM T0.3
120/1. [0] 139400-0300 SHIM T0.5
120/1. [0] 139400-0400 SHIM T1.0
120/1. [0] 139400-7200 SHIM T0.1
132. [1] 029731-4680 EYE BOLT
142. [1] 029731-0430 EYE BOLT
152. [1] 132424-0620 OVER FLOW VALVE
162. [1] 029731-4680 EYE BOLT

Include in #1:

106661-0970 as FUEL INJECTION PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
106066-1320 
9 410 610 446 
   
FUEL-INJECTION PUMP
* Q




Information:


Do not heat the gear with a torch. Do not heat the gear to a temperature of more than 315°C (600°F). Heating the gear with a torch or to a temperature of more than 315°C (600°F) may cause the two drive dowels for the automatic timing advance to loosen and come out of the gear.
2. Align slot in gear hub with the pin in the camshaft. Install the gear on the camshaft with timing mark on gear aligned with timing mark on crankshaft gear. Be sure the gear is completely seated against the shoulder of the camshaft.
Do not drive the gear on the camshaft.
3. Align holes in weights with dowels in gear and install the automatic timing advance.4. Align pin (3) in washer with hole (4) in camshaft and install washer (2).5. Install screw (1) and tighten to 7.9 0.6 N m (70 5 lb in). Stake screw in two places.
Installing Washer
(2) Washer. (3) Pin. (4) Hole.
Stake screw (1) carefully. Heavy blows on washer or screw can force the shaft extension too far into the camshaft and eliminate all end clearance.
6. After screw (1) is staked, the gear and weight assembly requires 0.08 to 0.94 mm (.003 to .037 in) end clearance to prevent binding against the washer, camshaft end or camshaft gear.
Staking Screw
(1) Screw.Camshaft Bearings Removal and Installation
Remove camshaft bearings using the 1P5544 Washer (1) and 0S0509 Bolts (2), from the 1P5545 Adapter Group, in conjunction with the 8S2241 Camshaft Bearing Removal and Installation Group, and the 8H0684 Ratchet Box Wrench.
Installing Washer
(1) 1P5544 Washer. (2) 0S0509 Bolt.With removal tools installed on cylinder block, remove bearings.
Removing Camshaft BearingsUse the 1P5545 Adapter Group in conjunction with the 8S2241 Camshaft Bearing Removal and Installation Group, and the 8S0684 Ratchet Box Wrench to install camshaft bearing.
Installing Camshaft BearingsThe 1P5545 Adapter Group pilots in the camshaft bearing bore and also pilots the bearing into the bore. This insures bearing alignment. Install bearings from chamfered side of the bore and align oil hole in bearings with oil holes in cylinder block.To install the camshaft front bearing, it is necessary to machine a notch in the 8S8289 Tube (3) for clearance of the boss that projects above the camshaft bearing bore. Machine the notch 38.1 mm (1.50 in) wide, 9.5 mm (.37 in) deep, with a 3.2 mm (.13 in) radius or chamfer in the corners and on the edges.
Notch In Tube
(3) 8S8289 Tube. (4) 8S8288 Cone. (5) Notch.Invert the 8S8288 Cone (4) and install it in the 8S8289 Tube (3) for installation of the camshaft front bearing.
Installing Camshaft Front Bearing
(3) 8S8289 Tube. (4) 8S8288 Cone.Engine Test Procedure
Lubrication For A Rebuilt Engine
It is very important for a rebuilt engine to have "adequate" (needed) lubrication during the first seconds of operation. A "dry start" (without needed lubrication) on a rebuilt engine can cause bearing damage.When an engine is rebuilt with new parts, oil is put on each part as it is installed. This is generally enough lubrication for engine start-up. However, this lubrication

Have questions with 106066-1320?





Group cross 106066-1320 ZEXEL

Nissan-Diesel 

106066-1300  
9 410 610 127 
NP-PE6P110/321RS1 
1670196719 
FUEL-INJECTION PUMP
106066-1310  
9 410 612 118 
 
FUEL-INJECTION PUMP
106066-1320  
9 410 610 446 
 
FUEL-INJECTION PUMP
Back to top