106065-5240 ZEXEL FUEL-INJECTION PUMP Cross 1060655240 me056171


 

Information fuel-injection pump

ZEXEL 106065-5240 1060655240
MITSUBISHI ME056171 me056171
106065-5240 FUEL-INJECTION PUMP
Rating:
23
Buy FUEL-INJECTION PUMP 106065-5240 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
106065-5240 
 
ME056171  MITSUBISHI
FUEL-INJECTION PUMP
* Q




Information:

(1) Bore in the rear bearing for the camshaft (new) ... 60.325 0.013 mm (2.3750 .0005 in) Diameter of rear bearing surface (journal) of the camshaft (new) ... 60.249 0.013 mm (2.3720 .0005 in)Maximum permissible clearance between the bearing and the camshaft bearing surface (journal) (worn) ... 0.15 mm (.006 in)(2) Torque for screws that hold sleeve control levers ... 2.8 0.2 N m (24 2 lb in)(3) Bore in the housing for the fuel control shaft (new) ... 8.999 0.013 mm (.3543 .0005 in) Diameter of sleeve control shaft (new) ... 8.966 0.008 mm (.3530 .0003 in)Maximum permissible clearance between the bore in the housing and the sleeve control shaft (worn) ... 0.08 mm (.003 in)(4) End play for camshaft with sleeve installed (new) ... 0.58 0.46 mm (.023 .018 in) When installing sleeve on end of camshaft, support the camshaft to prevent damage to parts inside of injection pump and governor housing.(5) Bore in the front bearing for the camshaft (new) ... 25.413 0.013 mm (1.0005 .0005 in) Diameter of front bearing surface (journal) of the camshaft (new) ... 25.375 0.013 mm (.9990 .0005 in)Maximum permissible clearance between the bearing and the camshaft bearing surface (journal) (worn) ... 0.10 mm (.004 in) (6) Torque for bushing ... 82 7 N m (60 5 lb ft)(7) Crossover levers. For adjustment of crossover levers, see the Testing And Adjusting Section.(8) Torque for screws that hold crossover levers ... 2.8 0.2 N m (24 2 lb in)(9 and 10) Fuel control shafts.(11) Dowel pin (linkage between crossover levers).(12) Distance guide pin extends into bore ... 1.20 0.10 mm (.047 .004 in) Install guide pin with slot toward the top of the lifter bore.(13) 9N5862 Spring for injection pump: Length under test force ... 35.13 mm (1.383 in)Test force ... 56.7 6.6 N (12.4 1.4 lb)Free length after test ... 40.80 mm (1.606 in)Outside diameter ... 18.49 mm (.728 in)A. Reverse Flow Check Valve (RFC).B. Orificed Delivery Valve (ODV).C. Orificed Delivery Valve-Lo Volume (ODV).D. Orificed Reverse Flow Check Valve (ORFC).

Have questions with 106065-5240?





Group cross 106065-5240 ZEXEL

Mitsubishi 

 
ME056043 
FUEL-INJECTION PUMP
9 410 613 960 
 
FUEL-INJECTION PUMP

Mitsubishi 

106065-5240  
 
ME056171 
FUEL-INJECTION PUMP
9 410 612 975 
NP-PE6P100/721RS3000NP99 
ME726601 
FUEL-INJECTION PUMP
 
ME726602 
FUEL-INJECTION PUMP
 
ME726603 
FUEL-INJECTION PUMP
9 410 614 357 
NP-PE6P100/721RS3000NP200 
ME716902 
FUEL-INJECTION PUMP
9 410 610 030 
NP-PE6P100/721RS3000NP201 
ME717129 
FUEL-INJECTION PUMP
 
ME717147 
FUEL-INJECTION PUMP
Back to top