106061-5920 ZEXEL 9 410 612 356 BOSCH FUEL-INJECTION PUMP 9410612356 1060615920


 

Information fuel-injection pump

BOSCH 9 410 612 356 9410612356
ZEXEL 106061-5920 1060615920
106061-5920 FUEL-INJECTION PUMP
Rating:
20
Buy FUEL-INJECTION PUMP 106061-5920 zexel genuine, new aftermarket engine parts with delivery

Include in #1:

106671-5020 as FUEL INJECTION PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
106061-5920 
106061-5921 
9 410 612 356 
   
FUEL-INJECTION PUMP
* Q




Information:

White Smoke Recommended Procedure1. Cold Outside Temperatures ... When the air outside is cold, the cylinder temperature is cooler. Not all the fuel will burn in the cylinders. The fuel which does not burn comes out the exhaust as white smoke. White smoke is normal in cold temperatures until the engine operates long enough to become warm. There will be less white smoke if No. 1 diesel fuel is used.2. Long Idle Periods ... When an engine runs at idle speed for a long period of time, the cylinders cool and all of the fuel does not burn. Do not idle an engine for a long period of time. Stop an engine when it is not in use. If long idle periods are necessary, use No. 1 diesel fuel.3. Low Quality Fuel ... Test the engine using fuel according to recommendations by Caterpillar Tractor Co.4. Air in Fuel System ... With air in the fuel system, the engine will normally be difficult to start, run rough, and release a large amount of white smoke. If the engine will not start, loosen a fuel injection line nut at the cylinder head. With the governor lever in the shutoff position, operate the fuel priming pump until the flow of fuel from the loosened fuel injection line is free of air. Tighten the fuel line nut. Fasten the priming pump and start the engine. If the engine still does not run smooth or releases a large amount of white smoke, loosen the fuel line nuts one at a time at the cylinder head until the fuel that comes out is free of air. Tighten the fuel line nuts. If the air can not be removed in this way, put 5 psi (35 kPa) of air pressure to the fuel tank.
Do not use more than 8 psi (55 kPa) of air pressure in the fuel tank or damage to the tank may result.
Check for leakage at the connections between the fuel tank and the fuel transfer pump. If leaks are found, tighten the connections or replace the lines. If there are no visual leaks, remove the fuel supply line from the tank and connect it to an outside fuel supply. If this corrects the problem, the suction line (standpipe) inside the fuel tank has a leak.5. Fuel Injection Timing Not Correct ... Check and make necessary adjustments as per Testing and Adjusting section of this Service Manual.6. Automatic Timing Advance Does Not Operate Correctly ... Check with engine warm. Use the 1P3500 Timing Light Group. Special Instruction Form No. SMHS6964 gives the test procedure. If the timing light is not available, make rapid "acceleration" (increase in speed) from low idle to high idle. Engine must have smooth acceleration. A timing advance that does not operate correctly can cause delays of the engine acceleration at some rpm before high idle, or possibly cause the engine to run rough and have exhaust noise (backfire) during acceleration. This condition is difficult to find if

Have questions with 106061-5920?





Group cross 106061-5920 ZEXEL

9 410 613 982 
 
FUEL-INJECTION PUMP
9 410 613 983 
 
FUEL-INJECTION PUMP
9 410 610 993 
 
FUEL-INJECTION PUMP
9 410 613 984 
 
FUEL-INJECTION PUMP
9 410 613 536 
NP-PE6P120/721LS3S 
 
FUEL-INJECTION PUMP
9 410 613 537 
NP-PE6P120/301LS3S 
 
FUEL-INJECTION PUMP
106061-5920  

106061-5921 
9 410 612 356 
 
FUEL-INJECTION PUMP
9 410 610 980 
 
FUEL-INJECTION PUMP

Nissan-Diesel 

9 410 611 607 
NP-PE6P120/321RS3000 
1670195504 
FUEL-INJECTION PUMP
9 410 613 985 
 
FUEL-INJECTION PUMP
9 410 613 992 
 
FUEL-INJECTION PUMP

Mitsubishi-Heav 

9 410 611 558 
3256504421 
FUEL-INJECTION PUMP
9 410 614 083 
 
FUEL-INJECTION PUMP
9 410 614 084 
 
FUEL-INJECTION PUMP
9 410 614 085 
NP-PE6P120/321LS3S 
 
FUEL-INJECTION PUMP

Hino 

 
221003290A 
FUEL-INJECTION PUMP
9 410 612 146 
221003291A 
FUEL-INJECTION PUMP
9 410 611 142 
 
FUEL-INJECTION PUMP
9 410 611 284 
 
FUEL-INJECTION PUMP
9 410 614 180 
 
FUEL-INJECTION PUMP

Hino 

9 410 612 147 
221003341A 
FUEL-INJECTION PUMP
9 410 612 148 
221003342A 
FUEL-INJECTION PUMP
9 410 612 148 
221004120A 
FUEL-INJECTION PUMP
9 410 611 143 
221004120B 
FUEL-INJECTION PUMP
9 410 611 144 
221004121A 
FUEL-INJECTION PUMP
F 01G 29M 009 
 
FUEL-INJECTION PUMP
9 410 612 162 
 
FUEL-INJECTION PUMP
9 410 614 257 
 
FUEL-INJECTION PUMP
9 410 612 163 
 
FUEL-INJECTION PUMP
9 410 614 258 
 
FUEL-INJECTION PUMP
9 410 613 228 
NP-PE6P120/721LS3000 
 
FUEL-INJECTION PUMP

Hino 

9 410 612 189 
NP-PE6P120/321LS3S 
221003390A 
FUEL-INJECTION PUMP
Back to top