Fuel injectors
  1. Home
  2. fuel
  3. #1060607173

106060-7173 ZEXEL 9 410 614 429 BOSCH FUEL-INJECTION PUMP 9410614429 1060607173


 

Information fuel-injection pump

BOSCH 9 410 614 429 9410614429
ZEXEL 106060-7173 1060607173
106060-7173 FUEL-INJECTION PUMP
Rating:
67
Buy FUEL-INJECTION PUMP 106060-7173 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

PUMP HOUSING
1. [1] 134051-1820 PUMP HOUSING
1/30. [3] 029040-6020 STUD
1/45. [1] 134311-0000 SPACER RING
1/50. [12] 134138-0000 STUD
7. [6] 134141-6420 PLUNGER-AND-BARREL ASSY
7/1. [6] 134131-0520 FLANGE BUSHING
7/2. [6] 134101-6020 PLUNGER-AND-BARREL ASSY
7/3. [6] 134110-0920 DELIVERY-VALVE ASSEMBLY
7/4. [6] 134116-4220 FITTING
7/5. [6] 139722-0200 O-RING
7/6. [6] 134117-0500 FILLER PIECE
7/7. [6] 134112-1900 COILED SPRING
7/8. [6] 134115-0100 GASKET
7/9. [6] 029302-0140 PLAIN WASHER
7/10. [6] 134135-0400 CAPSULE
7/11. [6] 029602-0010 LOCKING WASHER
7/12. [6] 134137-0000 SPACER RING
7/13. [6] 139729-0000 O-RING
7/14. [6] 139715-0200 O-RING
7/15. [6] 139715-0200 O-RING
23/1. [0] 134139-0000 SHIM T0.5
23/1. [0] 134139-0100 SHIM T0.6
23/1. [0] 134139-0200 SHIM T0.7
23/1. [0] 134139-0200 SHIM T0.7
23/1. [0] 134139-0300 SHIM T0.8
23/1. [0] 134139-0400 SHIM T0.9
23/1. [0] 134139-0500 SHIM T0.4
23/1. [0] 134139-0600 SHIM T0.15
23/1. [0] 134139-2300 SHIM T1.5
24. [6] 134132-0100 PLAIN WASHER
25. [12] 014111-0440 LOCKING WASHER
26. [12] 013021-0040 UNION NUT M10P1.5H8
30. [1] 134001-0200 BUSHING
30A. [1] 134001-0000 BUSHING
32. [1] 134256-1500 CONTROL RACK
33. [1] 024030-2030 BEARING PIN
34. [1] 134222-0000 BUSHING
38. [1] 134222-0500 BUSHING
41. [6] 134241-0021 CONTROL SLEEVE
43. [6] 134216-0000 SLOTTED WASHER
44. [6] 134215-0000 COMPRESSION SPRING
45. [6] 134217-0500 SLOTTED WASHER
47. [6] 134200-0020 TAPPET
47/2. [1] 134204-0000 ROLLER
47/3. [1] 134205-0000 BUSHING
47/4. [1] 134203-0000 BEARING PIN
47/5. [1] 131206-0500 SLIDER
59. [1] 016650-2230 BEARING PLATE
59B. [1] 028222-5010 BEARING PLATE
64/1. [0] 134303-0000 SHIM D59.8&43T1.2
64/1. [0] 134303-0100 SHIM D59.8&43T1.5
64/1. [0] 134303-0200 SHIM D59.8&43T1.8
64/1. [0] 134303-0300 SHIM D59.8&43T2.0
64/1. [0] 134303-0400 SHIM D59.8&43T0.6
67. [4] 029010-6810 BLEEDER SCREW
71. [1] 134371-2500 CAMSHAFT
74. [1] 134306-0000 BEARING SHELL
75. [2] 020106-2040 BLEEDER SCREW M6P1L20
79. [1] 016650-2230 BEARING PLATE
79B. [1] 028222-5010 BEARING PLATE
80. [1] 134316-0100 COVER
81. [1] 026712-5030 PACKING RING
82/1. [0] 134314-0000 SHIM T0.1
82/1. [0] 134314-0100 SHIM T0.12
82/1. [0] 134314-0200 SHIM T0.14
82/1. [0] 134314-0300 SHIM T0.16
82/1. [0] 134314-0400 SHIM T0.18
82/1. [0] 134314-0500 SHIM T0.3
82/1. [0] 134314-0600 SHIM T0.5
83. [1] 139755-0100 O-RING
85. [1] 134043-0800 COVER
86. [1] 134042-1400 GASKET
87. [12] 012206-1640 FLAT-HEAD SCREW M6P1L16
88. [1] 134045-0100 CAPSULE
89. [1] 026524-2940 GASKET D28.9&24.3T2
92. [3] 014110-6440 LOCKING WASHER
93. [3] 013020-6040 UNION NUT M6P1H5
95. [1] 131041-0800 GASKET
96. [6] 134047-0000 CAPSULE
98. [1] 025805-1910 WOODRUFF KEY
111. [1] 134416-0100 COVER
112. [2] 014530-6540 TAB WASHER
113. [2] 021306-3010 FLAT-HEAD SCREW
118. [1] 134496-0600 POINTER
119. [2] 029020-6270 BLEEDER SCREW
136. [1] 134430-2920 EYE BOLT
137. [1] 152308-1700 INLET UNION
138. [2] 026514-1840 GASKET D17.9&14.2T1
147. [1] 131601-4500 EYE BOLT
148. [2] 026510-1340 GASKET D13.4&10.2T1
149. [1] 027110-0640 INLET UNION
156. [1] 131601-3600 BLEEDER SCREW
157. [1] 152308-1900 INLET UNION
158. [2] 026514-1840 GASKET D17.9&14.2T1
166. [1] 131424-8920 OVER FLOW VALVE
167. [1] 134433-8020 PIPE
168. [2] 026514-1840 GASKET D17.9&14.2T1
172. [1] 134420-0220 AIR FILTER

Include in #1:

106671-4343 as FUEL INJECTION PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
106060-7173 
106060-7174 
9 410 614 429 
   
FUEL-INJECTION PUMP
* Q




Information:

1. Remove the retaining ring (1) and pin (2). 2. Remove the seat (3), bolt (4), washers (5), and spring (6).3. Remove the sleeve and bearing assembly from the cylinder and weight assembly. 4. Remove the retaining ring (7) from sleeve (8).5. Remove the bearing (9) and races (10) from sleeve (8). 6. Remove the valve (11) from piston (12).7. Remove the retaining ring (13) from the cylinder and weight assembly.8. Remove the weight assembly (14).9. Remove piston (12) and sleeve (15) from the cylinder (16).10. Remove the O-ring seal from sleeve (15). 11. Remove the speed limiter plug (17), spring (18), and plunger (19) from the governor housing.12. Remove the high idle screw (21) and low idle screw (20). 13. Remove the bolt and lock that holds the shaft (22) to lever assembly (23).14. Remove the shaft (22) and lever assembly (23) from governor housing.15. Remove the seal and bearings from governor housing. 16. Remove the two bolts (25) and lock. Remove the lever (24) and shaft (26) from idle screw housing.17. Remove the two seals and bearing from idle screw housing.Assemble Governor
1. Install the O-ring seal (3) on sleeve (4).2. Install piston (2) and sleeve (4) in the cylinder (1). 3. Put the weight assembly (6) in position on cylinder (1), and install retaining ring (5). 4. Install valve (8) in piston (2).5. Install the bearing and races in sleeve. Install the retaining ring. Install the sleeve and bearing assembly (7) on valve (8). 6. Put the bolt (10), washers (11), and spring (12) in position in seat (9). 7. Put the holes in seat (9), sleeve and bearing assembly (7), and valve (8) in alignment, and install the pin (13). Install the retaining ring (14). 8. Use tool setup (A) to install the inner seal in idle screw housing with the spring side of seal toward tool setup (A). Use tool setup (A) to install the outer seal in housing with lip of seal toward inside of housing. Put clean oil on the bearing and lip of seals.9. Put the shaft and lever in position in the idle screw housing, and install the bolts and lock. 10. Install the two bearings in governor housing. Use tool setup (A) to install the seal in housing with lip of seal toward inside of the governor housing. Put clean oil on the bearings and lip of seal. 11. Put the shaft (15) and lever assembly (17) in position in governor housing, and install the bolt (16) and lock. Install the high and low idle screws in housing. Install the speed limiter plunger, spring, and plug in housing.end by: a) connection of governor to fuel injection pump housing

Have questions with 106060-7173?





Group cross 106060-7173 ZEXEL

106060-7170  

106060-7171 
9 410 614 426 
 
FUEL-INJECTION PUMP
106060-7171  

106060-7172 
9 410 614 427 
 
FUEL-INJECTION PUMP
106060-7172  

106060-7173 
9 410 614 428 
 
FUEL-INJECTION PUMP
106060-7173  

106060-7174 
9 410 614 429 
 
FUEL-INJECTION PUMP
106060-7175  

106060-7176 
9 410 613 222 
 
FUEL-INJECTION PUMP
106060-7176  
9 410 613 857 
NP-PE6P120/721LS3000 
 
FUEL-INJECTION PUMP
Back to top