Fuel injectors
  1. Home
  2. fuel
  3. #1060607172

106060-7172 ZEXEL 9 410 614 428 BOSCH FUEL-INJECTION PUMP 9410614428 1060607172


 

Information fuel-injection pump

BOSCH 9 410 614 428 9410614428
ZEXEL 106060-7172 1060607172
106060-7172 FUEL-INJECTION PUMP
Rating:
66
Buy FUEL-INJECTION PUMP 106060-7172 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

PUMP HOUSING
1. [1] 134051-1820 PUMP HOUSING
1/30. [3] 029040-6020 STUD
1/45. [1] 134311-0000 SPACER RING
1/50. [12] 134138-0000 STUD
7. [6] 134143-8221 PLUNGER-AND-BARREL ASSY
7/1. [6] 134131-0520 FLANGE BUSHING
7/2. [6] 134101-6020 PLUNGER-AND-BARREL ASSY
7/3. [6] 134110-0920 DELIVERY-VALVE ASSEMBLY
7/4. [6] 134116-4220 FITTING
7/5. [6] 139722-0200 O-RING
7/6. [6] 134117-0500 FILLER PIECE
7/7. [6] 132112-0200 COILED SPRING
7/8. [6] 134115-0100 GASKET
7/9. [6] 029302-0140 PLAIN WASHER
7/10. [6] 134135-0400 CAPSULE
7/11. [6] 029602-0010 LOCKING WASHER
7/12. [6] 134137-0000 SPACER RING
7/13. [6] 139729-0000 O-RING
7/14. [6] 139715-0200 O-RING
7/15. [6] 139715-0200 O-RING
23/1. [0] 134139-0000 SHIM T0.5
23/1. [0] 134139-0100 SHIM T0.6
23/1. [0] 134139-0200 SHIM T0.7
23/1. [0] 134139-0300 SHIM T0.8
23/1. [0] 134139-0400 SHIM T0.9
23/1. [0] 134139-0500 SHIM T0.4
23/1. [0] 134139-0600 SHIM T0.15
23/1. [0] 134139-2300 SHIM T1.5
23/1. [0] 134139-2300 SHIM T1.5
24. [6] 134132-0100 PLAIN WASHER
25. [12] 014111-0440 LOCKING WASHER
26. [12] 013021-0040 UNION NUT M10P1.5H8
30. [1] 134001-0200 BUSHING
30A. [1] 134001-0000 BUSHING
32. [1] 134256-1500 CONTROL RACK
33. [1] 024030-2030 BEARING PIN
34. [1] 134222-0000 BUSHING
38. [1] 134222-0500 BUSHING
41. [6] 134241-0021 CONTROL SLEEVE
43. [6] 134216-0000 SLOTTED WASHER
44. [6] 134215-0000 COMPRESSION SPRING
45. [6] 134217-0500 SLOTTED WASHER
47. [6] 134200-0020 TAPPET
47/2. [1] 134204-0000 ROLLER
47/3. [1] 134205-0000 BUSHING
47/4. [1] 134203-0000 BEARING PIN
47/5. [1] 131206-0500 SLIDER
59. [1] 016650-2230 BEARING PLATE
59B. [1] 028222-5010 BEARING PLATE
64/1. [0] 134303-0000 SHIM D59.8&43T1.2
64/1. [0] 134303-0100 SHIM D59.8&43T1.5
64/1. [0] 134303-0200 SHIM D59.8&43T1.8
64/1. [0] 134303-0300 SHIM D59.8&43T2.0
64/1. [0] 134303-0400 SHIM D59.8&43T0.6
67. [4] 029010-6810 BLEEDER SCREW
71. [1] 134371-2500 CAMSHAFT
74. [1] 134306-0000 BEARING SHELL
75. [2] 020106-2040 BLEEDER SCREW M6P1L20
79. [1] 016650-2230 BEARING PLATE
79B. [1] 028222-5010 BEARING PLATE
80. [1] 134316-0100 COVER
81. [1] 026712-5030 PACKING RING
82/1. [0] 134314-0000 SHIM T0.1
82/1. [0] 134314-0100 SHIM T0.12
82/1. [0] 134314-0200 SHIM T0.14
82/1. [0] 134314-0300 SHIM T0.16
82/1. [0] 134314-0400 SHIM T0.18
82/1. [0] 134314-0500 SHIM T0.3
82/1. [0] 134314-0600 SHIM T0.5
83. [1] 139755-0100 O-RING
85. [1] 134043-0800 COVER
86. [1] 134042-1400 GASKET
87. [12] 012206-1640 FLAT-HEAD SCREW M6P1L16
88. [1] 134045-0100 CAPSULE
89. [1] 026524-2940 GASKET D28.9&24.3T2
92. [3] 014110-6440 LOCKING WASHER
93. [3] 013020-6040 UNION NUT M6P1H5
95. [1] 131041-0800 GASKET
96. [6] 134047-0000 CAPSULE
98. [1] 025805-1910 WOODRUFF KEY
111. [1] 134416-0100 COVER
112. [2] 014530-6540 TAB WASHER
113. [2] 021306-3010 FLAT-HEAD SCREW
118. [1] 134496-0600 POINTER
119. [2] 029020-6270 BLEEDER SCREW
136. [1] 134430-2920 EYE BOLT
137. [1] 152308-1700 INLET UNION
138. [2] 026514-1840 GASKET D17.9&14.2T1
147. [1] 131601-4500 EYE BOLT
148. [2] 026510-1340 GASKET D13.4&10.2T1
149. [1] 027110-0640 INLET UNION
156. [1] 131601-3600 BLEEDER SCREW
157. [1] 152308-1900 INLET UNION
158. [2] 026514-1840 GASKET D17.9&14.2T1
166. [1] 133424-0320 OVER FLOW VALVE
167. [1] 134433-8020 PIPE
168. [2] 026514-1840 GASKET D17.9&14.2T1
172. [1] 134420-0220 AIR FILTER

Include in #1:

106671-4342 as FUEL INJECTION PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
106060-7172 
106060-7173 
9 410 614 428 
   
FUEL-INJECTION PUMP
* Q




Information:

3. Disconnect all fuel injection lines (2) from the pump housing. Put caps and plugs in all lines or openings.4. Disconnect sensing line (1) from fuel ratio control.5. Disconnect fuel supply line (3) from fuel injection pump housing.6. Remove the two bolts (5) that hold bracket to the cylinder block.7. Remove the bolts (4) that hold injection pump housing to accessory drive housing. Remove the fuel injection pump housing and governor. Weight of pump housing and governor is 70 lb. (32 kg).Install Fuel Injection Pump Housing And Governor
1. Remove plugs and caps from lines and openings. Put the fuel injection pump housing and governor in position on engine, and install the bolts in accessory drive housing (1).2. Install the two bolts in bracket (2).3. Connect the fuel injection lines to the pump housing. Tighten the nuts to 30 5 lb.ft. (4.1 0.7 mkg).4. Connect fuel supply line to pump housing.5. Connect the sensing line to fuel ratio control.6. Connect control linkage for the governor.7. Check the camshaft timing for the fuel injection pumps. See FUEL INJECTION PUMP CAMSHAFT TIMING in TESTING AND ADJUSTING.Separation Of Governor From Fuel Injection Pump Housing
start by: a) remove fuel injection pump housing and governorb) remove fuel ratio controlc) remove fuel shutoff solenoid1. Remove the idle screw cover, plate, and housing. 2. Remove the screw (2) from rack stop collar.3. Remove rack stop collar (3), spring, and collar.4. Remove the bolts (1) that hold the governor to the fuel injection pump housing. Remove the governor housing.5. Remove the spring and seat assembly from the governor housing. 6. Remove the washer-type spring (5).7. Remove the three bolts (4) and lock.8. Remove the cylinder and weight assembly (6).Connection Of Governor To Fuel Injection Pump Housing
1. Put the cylinder and weight assembly (2) in position on the injection pump housing so the opening in piston (1) is engaged with groove in rack (3). Install the lock and three bolts. 2. Install the washer-type spring (4) so inside diameter of spring will be against the guide in governor housing (5).3. Install the spring and seat assembly in the governor housing. Put the governor housing (5) in position on pump housing, and install the bolts.4. Put the spring, collar, and rack stop collar in position, and install the screw in rack stop collar. Install idle screw housing.end by: a) install fuel shutoff solenoidb) install fuel injection pump housing and governorc) make adjustments to rack and governor as given in TESTING AND ADJUSTINGd) install fuel ratio control

Have questions with 106060-7172?





Group cross 106060-7172 ZEXEL

106060-7170  

106060-7171 
9 410 614 426 
 
FUEL-INJECTION PUMP
106060-7171  

106060-7172 
9 410 614 427 
 
FUEL-INJECTION PUMP
106060-7172  

106060-7173 
9 410 614 428 
 
FUEL-INJECTION PUMP
106060-7173  

106060-7174 
9 410 614 429 
 
FUEL-INJECTION PUMP
106060-7175  

106060-7176 
9 410 613 222 
 
FUEL-INJECTION PUMP
106060-7176  
9 410 613 857 
NP-PE6P120/721LS3000 
 
FUEL-INJECTION PUMP
Back to top