106060-7170 ZEXEL 9 410 614 426 BOSCH FUEL-INJECTION PUMP 9410614426 1060607170

Information fuel-injection pump

BOSCH 9 410 614 426 9410614426

ZEXEL 106060-7170 1060607170

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy FUEL-INJECTION PUMP 106060-7170 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	134051-1820	PUMP HOUSING
1/30.	[3]	029040-6020	STUD
1/45.	[1]	134311-0000	SPACER RING
1/50.	[12]	134138-0000	STUD
7.	[6]	134143-8220	PLUNGER-AND-BARREL ASSY
7/1.	[6]	134131-0520	FLANGE BUSHING
7/2.	[6]	134101-6020	PLUNGER-AND-BARREL ASSY
7/3.	[6]	134110-0920	DELIVERY-VALVE ASSEMBLY
7/4.	[6]	134116-4220	FITTING
7/5.	[6]	029632-2070	O-RING
7/6.	[6]	134117-0500	FILLER PIECE
7/7.	[6]	132112-0200	COILED SPRING
7/8.	[6]	134115-0100	GASKET
7/9.	[6]	029302-0140	PLAIN WASHER
7/10.	[6]	134135-0200	CAPSULE
7/11.	[6]	029602-0010	LOCKING WASHER
7/12.	[6]	134137-0000	SPACER RING
7/13.	[6]	029632-9030	O-RING
7/14.	[6]	029631-5020	O-RING
7/15.	[6]	029631-5020	O-RING
23/1.	[0]	134139-0000	SHIM T0.5
23/1.	[0]	134139-0000	SHIM T0.5
23/1.	[0]	134139-0100	SHIM T0.6
23/1.	[0]	134139-0200	SHIM T0.7
23/1.	[0]	134139-0300	SHIM T0.8
23/1.	[0]	134139-0400	SHIM T0.9
23/1.	[0]	134139-0500	SHIM T0.4
23/1.	[0]	134139-0600	SHIM T0.15
23/1.	[0]	134139-2300	SHIM T1.5
24.	[6]	134132-0100	PLAIN WASHER
25.	[12]	014111-0440	LOCKING WASHER
26.	[12]	013021-0040	UNION NUT M10P1.5H8
30.	[1]	134001-0200	BUSHING
30A.	[1]	134001-0000	BUSHING
32.	[1]	134256-1500	CONTROL RACK
33.	[1]	024030-2030	BEARING PIN
34.	[1]	134222-0000	BUSHING
38.	[1]	134222-0500	BUSHING
41.	[6]	134241-0021	CONTROL SLEEVE
43.	[6]	134216-0000	SLOTTED WASHER
44.	[6]	134215-0000	COMPRESSION SPRING
45.	[6]	134217-0500	SLOTTED WASHER
47.	[6]	134200-0020	TAPPET
47/2.	[1]	134204-0000	ROLLER
47/3.	[1]	134205-0000	BUSHING
47/4.	[1]	134203-0000	BEARING PIN
47/5.	[1]	131206-0500	SLIDER
59.	[1]	016650-2230	BEARING PLATE
59B.	[1]	028222-5010	BEARING PLATE
64/1.	[0]	134303-0000	SHIM D59.8&43T1.2
64/1.	[0]	134303-0100	SHIM D59.8&43T1.5
64/1.	[0]	134303-0200	SHIM D59.8&43T1.8
64/1.	[0]	134303-0300	SHIM D59.8&43T2.0
64/1.	[0]	134303-0400	SHIM D59.8&43T0.6
67.	[4]	029010-6810	BLEEDER SCREW
71.	[1]	134371-2500	CAMSHAFT
74.	[1]	134306-0000	BEARING SHELL
75.	[2]	020106-2040	BLEEDER SCREW M6P1L20
79.	[1]	016650-2230	BEARING PLATE
79B.	[1]	028222-5010	BEARING PLATE
80.	[1]	134316-0100	COVER
81.	[1]	026712-5010	PACKING RING
82/1.	[0]	134314-0000	SHIM T0.1
82/1.	[0]	134314-0100	SHIM T0.12
82/1.	[0]	134314-0200	SHIM T0.14
82/1.	[0]	134314-0300	SHIM T0.16
82/1.	[0]	134314-0400	SHIM T0.18
82/1.	[0]	134314-0500	SHIM T0.3
82/1.	[0]	134314-0600	SHIM T0.5
83.	[1]	029635-5010	O-RING
85.	[1]	134043-0800	COVER
86.	[1]	134042-1400	GASKET
87.	[12]	012206-1640	FLAT-HEAD SCREW M6P1L16
88.	[1]	134045-0100	CAPSULE
89.	[1]	026524-2940	GASKET D28.9&24.3T2
92.	[3]	014110-6440	LOCKING WASHER
93.	[3]	013020-6040	UNION NUT M6P1H5
95.	[1]	131041-0800	GASKET
96.	[6]	134047-0000	CAPSULE
98.	[1]	025805-1910	WOODRUFF KEY
111.	[1]	134416-0100	COVER
112.	[2]	014530-6540	TAB WASHER
113.	[2]	021306-3010	FLAT-HEAD SCREW
118.	[1]	134496-0600	POINTER
119.	[2]	029020-6270	BLEEDER SCREW
136.	[1]	134430-2920	EYE BOLT
137.	[1]	152308-1700	INLET UNION
138.	[2]	026514-1840	GASKET D17.9&14.2T1
147.	[1]	131601-4500	EYE BOLT
148.	[2]	026510-1340	GASKET D13.4&10.2T1
149.	[1]	027110-0640	INLET UNION
156.	[1]	131601-3600	BLEEDER SCREW
157.	[1]	152308-1900	INLET UNION
158.	[2]	026514-1840	GASKET D17.9&14.2T1
166.	[1]	133424-0320	OVER FLOW VALVE
167.	[1]	134433-8020	PIPE
168.	[2]	026514-1840	GASKET D17.9&14.2T1
172.	[1]	134420-0220	AIR FILTER

Include in #1:

106671-4340 as FUEL INJECTION PUMP

Cross reference number

Zexel num

Bosch num

Firm num

Name

106060-7170
106060-7171

9 410 614 426

FUEL-INJECTION PUMP
* Q

Information:

1. Disconnect the fuel outlet line (1) and fuel inlet line (3) from the priming pump.2. Disconnect the fuel line (2) from pump.3. Remove the bolts (4) from pump.4. Remove the fuel transfer pump.5. Remove the fuel lines (1) and (3) from pump.Install Fuel Transfer Pump
1. Install the two fuel lines in transfer pump.2. Put the fuel transfer pump in position in the accessory drive housing, and install the two bolts.3. Connect the two fuel lines to priming pump.4. Connect the fuel line to transfer pump.Disassemble Fuel Transfer Pump
start by: a) remove fuel transfer pump 1. Remove the nut (2), gear (3), and key.2. Remove the cage (1). Remove the O-ring seals from the cage.3. Use tool setup (A) to remove the bearing and seals from cage (1).4. Remove the cover (4).
Be careful during disassembly and assembly of pump to prevent damage to the contacting surfaces of the cover (4) and the pump body.
5. Remove the bolt (5), spring, and ball for the check valve for the priming pump. 6. Remove the gear (7), and gear and shaft assembly (6) from pump body. 7. Use tool setup (A) to remove the bearing from the pump body.Assemble Fuel Transfer Pump
1. Clean all parts thoroughly before assembling the pump. 2. Use tool setup (A) to install the bearing in the pump body.3. Put the gear, and gear and shaft assembly in position in pump body.4. Put a thin amount of 8S6747 Liquid Gasket Material on the face of body assembly that is against the cover.
Do not let the liquid gasket material get into the pump.
5. Put the cover into position on pump body and install the bolts. The gear and shaft assembly must turn freely after the bolts in cover have been tightened.6. Install the check valve ball, spring, and bolt for the priming pump in the cover. 7. Use tool setup (B) to install the seals in cage. Install the two seals with the lips of seals toward each other.8. Use tool setup (A) to install the bearing in cage assembly. Install the O-ring seals on cage. 9. Put clean oil on O-ring seals and lips of seals. 10. Put the cage assembly in position, and install the woodruff key, gear, and nut. Tighten nut to 22 5 lb.ft. (3.0 0.7 mkg).end by: a) install fuel transfer pump