Information fuel-injection pump
BOSCH
9 461 619 297
9461619297
ZEXEL
104662-4010
1046624010
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$1,163.99
06 Jan 2024
0.1102[0.05] pounds
CN: chenmingxiangg
Diesel Fuel Injection VE Pump Compatible For 104662-4010 104762-4010 NP-VE6/ Compatible For 12F1125RNP170 6734-71-1240 Compatible For KOMATSU
ACLips Diesel Fuel Injection VE Pump Compatible For 104662-4010 104762-4010 NP-VE6/ Compatible For 12F1125RNP170 6734-71-1240 Compatible For KOMATSU || OEM NO. : 104662-4010 104762-4010 NP-VE6/12F1125RNP170 6734-71-1240 || ☎ Manufacturing-tested for worry-free, out-of-the-box performance || ☎ units are designed to meet original equipment (OE) compatibility, form and function requirements || ☎ Longer service life and less clogging.
ACLips Diesel Fuel Injection VE Pump Compatible For 104662-4010 104762-4010 NP-VE6/ Compatible For 12F1125RNP170 6734-71-1240 Compatible For KOMATSU || OEM NO. : 104662-4010 104762-4010 NP-VE6/12F1125RNP170 6734-71-1240 || ☎ Manufacturing-tested for worry-free, out-of-the-box performance || ☎ units are designed to meet original equipment (OE) compatibility, form and function requirements || ☎ Longer service life and less clogging.
$1,249.14
03 Nov 2023
0.1102[0.05] Pounds
CN: meiyuanlei
Diesel Fuel Injection VE Pump 104662-4010 104762-4010 NP-VE6/12F1125RNP170 6734-71-1240，Compatible For KOMATSU
AKkis ☆ Diesel Fuel Injection VE Pump 104662-4010 104762-4010 NP-VE6/12F1125RNP170 6734-71-1240，Compatible For KOMATSU || ☆ Quiet: The fuel pump is carefully designed and optimized, with low noise level, reducing noise interference during vehicle driving and improving driving experience and comfort. || ☆ High efficiency: The fuel pump can deliver fuel to the engine in a very short time to ensure the smooth operation and efficient combustion of the engine, thereby improving fuel utilization and vehicle performance. || ☆ Stability: Using advanced technology and design, it ensures stable fuel supply under various working conditions and prevents insufficient or excessive fuel reserve, thereby improving the driving safety and reliability of the car. || ☆ Energy saving and environmental protection: The fuel pump can intelligently adjust the amount of fuel supply according to the needs of the engine, avoid energy waste and excessive exhaust emissions, reduce environmental pollution, and improve fuel economy.
AKkis ☆ Diesel Fuel Injection VE Pump 104662-4010 104762-4010 NP-VE6/12F1125RNP170 6734-71-1240，Compatible For KOMATSU || ☆ Quiet: The fuel pump is carefully designed and optimized, with low noise level, reducing noise interference during vehicle driving and improving driving experience and comfort. || ☆ High efficiency: The fuel pump can deliver fuel to the engine in a very short time to ensure the smooth operation and efficient combustion of the engine, thereby improving fuel utilization and vehicle performance. || ☆ Stability: Using advanced technology and design, it ensures stable fuel supply under various working conditions and prevents insufficient or excessive fuel reserve, thereby improving the driving safety and reliability of the car. || ☆ Energy saving and environmental protection: The fuel pump can intelligently adjust the amount of fuel supply according to the needs of the engine, avoid energy waste and excessive exhaust emissions, reduce environmental pollution, and improve fuel economy.
$990.00
02 Dec 2022
0.0022[0.00] Pounds
CN: 5647896
Diesel VE Fuel Injection Pump 104662-4010 104762-4010 NP-VE6/12F1125RNP170 6734-71-1240 For KOMATSU 6D102E
JUIXXE
JUIXXE
Cross reference number
Zexel num
Bosch num
Firm num
Name
104662-4010
FUEL-INJECTION PUMP
Q 11CK FUEL INJECTION PUMP VE6 VE
Q 11CK FUEL INJECTION PUMP VE6 VE
Information:
Start By:a. remove valve covers
Do not let the tops of the fuel injection nozzles turn when the fuel lines are loosened. The nozzles will be damaged if the top of the nozzles turn in the body.
1. Use Tooling (A) to loosen the nuts on the fuel injection line.2. Remove fuel injection lines (1).3. Disconnect fuel injection line nut (2) from head adapter nut (3).4. Remove adapter nut (3) and the O-ring seal. 5. Remove four bolts (4) that hold rocker arm assembly (5), and remove rocker arm assembly (5).Install Rocker Shaft Assemblies
1. Check the adjustment of the valve bridges. See the topic "Install Push Rods, Valve Lifters & Valve Bridges" in this module. 2. Loosen all the rocker arm adjusting screws on rocker shaft assembly (5).3. Install rocker shaft assembly (5).4. Clean the bolts that hold the rocker shaft assembly. Put 2P-2506 Thread Lubricant on the bolt threads, and install them.5. Be sure the rocker arms and push rods are in alignment before the rocker shaft assembly bolts are tightened.6. Tighten the rocker shaft bolts in the following sequence.a. Tighten bolts (1) through (4) in numerical sequence to a torque of 280 27 N m (210 20 lb ft).b. Tighten bolts (1) through (4) in numerical sequence to a torque of 440 20 N m (320 15 lb ft).c. Tighten bolts (1) through (4) in numerical sequence again to a final torque of 440 20 N m (320 15 lb ft). 7. Install a new O-ring seal on head adapter (7), and put clean engine oil on it.8. Put fuel injection line (8) in position, but do not tighten the nuts.9. Install adapters (7), and connect fuel injection lines (8).10. Connect fuel injection lines (6) to adapters (7).
Do not let the tops of the fuel injection nozzles turn when the fuel lines are tightened. The nozzles will be damaged if the top of the nozzles turn in the body.
11. Use Tooling (A) to tighten the fuel injection line nuts to a torque of 41 7 N m (30 5 lb ft).12. Adjust the valve clearance settings. The clearance for the intake valve is 0.38 mm (.015 in). The clearance for the exhaust valves is 0.76 mm (.030 in). See the topic "Valve Clearance Setting" in Testing & Adjusting.End By:a. install valve coversDisassemble Rocker Shaft Assemblies
Start By:a. remove rocker shaft assemblies 1. Remove retainer (1) from the end of the shaft.2. Remove the washers and rocker arm (2). 3. Use Tool (A) to remove the pin that holds bracket (3) to the rocker arm shaft.4. Remove bracket (3), rocker arm (4) and the spring.5. Remove the remainder of the rocker arms. The center brackets do not have pins.Assemble Rocker Shaft Assemblies
Make sure all parts of the rocker shaft assembly are clean before assembly. 1. Put clean engine oil on shaft (3).2. Install the center springs, rocker arms and bracket.3. Install spring (1), rocker arm (4) and bracket (2).4. Put tape
Do not let the tops of the fuel injection nozzles turn when the fuel lines are loosened. The nozzles will be damaged if the top of the nozzles turn in the body.
1. Use Tooling (A) to loosen the nuts on the fuel injection line.2. Remove fuel injection lines (1).3. Disconnect fuel injection line nut (2) from head adapter nut (3).4. Remove adapter nut (3) and the O-ring seal. 5. Remove four bolts (4) that hold rocker arm assembly (5), and remove rocker arm assembly (5).Install Rocker Shaft Assemblies
1. Check the adjustment of the valve bridges. See the topic "Install Push Rods, Valve Lifters & Valve Bridges" in this module. 2. Loosen all the rocker arm adjusting screws on rocker shaft assembly (5).3. Install rocker shaft assembly (5).4. Clean the bolts that hold the rocker shaft assembly. Put 2P-2506 Thread Lubricant on the bolt threads, and install them.5. Be sure the rocker arms and push rods are in alignment before the rocker shaft assembly bolts are tightened.6. Tighten the rocker shaft bolts in the following sequence.a. Tighten bolts (1) through (4) in numerical sequence to a torque of 280 27 N m (210 20 lb ft).b. Tighten bolts (1) through (4) in numerical sequence to a torque of 440 20 N m (320 15 lb ft).c. Tighten bolts (1) through (4) in numerical sequence again to a final torque of 440 20 N m (320 15 lb ft). 7. Install a new O-ring seal on head adapter (7), and put clean engine oil on it.8. Put fuel injection line (8) in position, but do not tighten the nuts.9. Install adapters (7), and connect fuel injection lines (8).10. Connect fuel injection lines (6) to adapters (7).
Do not let the tops of the fuel injection nozzles turn when the fuel lines are tightened. The nozzles will be damaged if the top of the nozzles turn in the body.
11. Use Tooling (A) to tighten the fuel injection line nuts to a torque of 41 7 N m (30 5 lb ft).12. Adjust the valve clearance settings. The clearance for the intake valve is 0.38 mm (.015 in). The clearance for the exhaust valves is 0.76 mm (.030 in). See the topic "Valve Clearance Setting" in Testing & Adjusting.End By:a. install valve coversDisassemble Rocker Shaft Assemblies
Start By:a. remove rocker shaft assemblies 1. Remove retainer (1) from the end of the shaft.2. Remove the washers and rocker arm (2). 3. Use Tool (A) to remove the pin that holds bracket (3) to the rocker arm shaft.4. Remove bracket (3), rocker arm (4) and the spring.5. Remove the remainder of the rocker arms. The center brackets do not have pins.Assemble Rocker Shaft Assemblies
Make sure all parts of the rocker shaft assembly are clean before assembly. 1. Put clean engine oil on shaft (3).2. Install the center springs, rocker arms and bracket.3. Install spring (1), rocker arm (4) and bracket (2).4. Put tape