Information fuel-injection pump
BOSCH
9 460 614 823
9460614823
ZEXEL
104661-3001
1046613001
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
VE6 Diesel Fuel Injection Pump 104661-3001 VE6/11F1150RNP222
LCQBXGPU Long lifespan, stable and durable || Enhance power and solve oil leakage || Smooth start-up and improved fuel consumption || Excellent raw materials and advanced technology || VE6 Diesel Fuel Injection Pump 104661-3001 VE6/11F1150RNP222
LCQBXGPU Long lifespan, stable and durable || Enhance power and solve oil leakage || Smooth start-up and improved fuel consumption || Excellent raw materials and advanced technology || VE6 Diesel Fuel Injection Pump 104661-3001 VE6/11F1150RNP222
OCTOT Fuel Injection Pump 32B65-00010 104661-3001 Fits For Mitsubishi Engine S6S
OCTOT
OCTOT
VE6 Diesel Fuel Injection Pump 104661-3001 VE6/11F1150RNP222
ZAIQUDOU Make sure the OE number matches the part you are replacing. || Easy to install: direct replacement, OEM standard, plug and play. Not just aftermarket replacements. || Efficient and stable: The use of advanced technology can provide efficient and stable fuel supply to ensure the normal operation of the vehicle. || Warranty period: 6 months. If there are any problems during this period, repair or replacement services will be provided. || Package includes: 1 piece jet pump
ZAIQUDOU Make sure the OE number matches the part you are replacing. || Easy to install: direct replacement, OEM standard, plug and play. Not just aftermarket replacements. || Efficient and stable: The use of advanced technology can provide efficient and stable fuel supply to ensure the normal operation of the vehicle. || Warranty period: 6 months. If there are any problems during this period, repair or replacement services will be provided. || Package includes: 1 piece jet pump
Include in #2:
104761-3001
as FUEL INJECTION PUMP
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
1. Disconnect air line (1) at fitting. Remove two bolts (2). Pull up and toward the front of the engine to remove the bolt of the fuel ratio from the groove (slot) in the collar for the governor. Remove fuel ratio control (3). Remove gasket from fuel ratio control.2. Install a new gasket on fuel ratio control. Install fuel ratio control (3). Make sure bolt engages with stop collar in governor control.3. Install two bolts (2). Connect air line (1) at fitting.4. Make sure the fuel ratio control is in correct adjustment. See Systems Operation Testing & Adjusting Manual for this procedure.5. Install a new governor seal.Disassemble Fuel Ratio Control
Start By:a. remove fuel ratio control 1. Remove two bolts (1) and the housing (2). 2. Remove valve assembly (3).3. Remove seal (4) and O-ring seal from valve.4. Remove the retainer (5) and two springs (6). 5. Remove three bolts (9) and cover (10).6. Remove valve (7), diaphragm (8), retainer and spring. 7. Remove pin (12) from valve (7).8. Remove cover (11) from the valve.9. Remove the seal from the cover (11).Assemble Fuel Ratio Control
1. Put clean engine oil on lip of seal. Install the seal (1) in cover (2). Install seal so lip of seal is toward the inside of the cover. 2. Install the valve (3) into cover (2).3. Install the pin that holds cover on valve. 4. Install spring (7) and the retainer (6) in cover (8).5. Install diaphragm (5) on the valve assembly (4) and in the cover. 6. Install cover and three bolts (11) that hold covers together.7. Put clean engine oil on seal and ring seal. Install the seals (10) on valve.8. Install the two springs (13), retainer and valve assembly (12).9. Install housing (9) and two bolts.
Correct adjustment must be made to fuel ratio control before installation. See Systems Operation Testing & Adjusting for this procedure.
End By:a. install fuel ratio control
Start By:a. remove fuel ratio control 1. Remove two bolts (1) and the housing (2). 2. Remove valve assembly (3).3. Remove seal (4) and O-ring seal from valve.4. Remove the retainer (5) and two springs (6). 5. Remove three bolts (9) and cover (10).6. Remove valve (7), diaphragm (8), retainer and spring. 7. Remove pin (12) from valve (7).8. Remove cover (11) from the valve.9. Remove the seal from the cover (11).Assemble Fuel Ratio Control
1. Put clean engine oil on lip of seal. Install the seal (1) in cover (2). Install seal so lip of seal is toward the inside of the cover. 2. Install the valve (3) into cover (2).3. Install the pin that holds cover on valve. 4. Install spring (7) and the retainer (6) in cover (8).5. Install diaphragm (5) on the valve assembly (4) and in the cover. 6. Install cover and three bolts (11) that hold covers together.7. Put clean engine oil on seal and ring seal. Install the seals (10) on valve.8. Install the two springs (13), retainer and valve assembly (12).9. Install housing (9) and two bolts.
Correct adjustment must be made to fuel ratio control before installation. See Systems Operation Testing & Adjusting for this procedure.
End By:a. install fuel ratio control