Information fuel-injection pump
BOSCH
9 461 619 740
9461619740
ZEXEL
104645-3931
1046453931
Rating:
Include in #2:
104745-3931
as FUEL INJECTION PUMP
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Lower - To drop to a reduced energy position. To reduce the level of material in a container. To cause to descend.
Loosen - To make less tight. To set free. To release.
Measure - To determine the dimension, area, volume, or other quantifiable property of an object. A desired quantity of something.
Open - To unseal or get access to.
Operation and Maintenance Manual - Refer to a procedure in the Operation and Maintenance Manual.
Position - To locate to the desired or intended location.
Relieve - To eliminate the pressure or force on a part or system to reduce a pressure, load, or weight on a device.
Remove - To take off.
Replace - To put back in place.
Rotate - Counter Clockwise - To turn on an axis. To alternate position or orientation, for the purpose of achieving even wear.
Tighten - To make nearer, to fully stretch, without slack, or to apply tension or torque.Machine Preparation
Illustration 2 g06181614
Illustration 3 g06181622
Illustration 4 g06303840
Refer to the Operation and Maintenance Manual , Machine Preparation for Troubleshooting for the machine that is being worked on in order to release system pressure.
Illustration 5 g06181692Location of Rework
Illustration 6 g06287569Rework Procedure
Illustration 7 g06287850
Illustration 8 g06304138
Illustration 9 g06304142
Loosen - To make less tight. To set free. To release.
Measure - To determine the dimension, area, volume, or other quantifiable property of an object. A desired quantity of something.
Open - To unseal or get access to.
Operation and Maintenance Manual - Refer to a procedure in the Operation and Maintenance Manual.
Position - To locate to the desired or intended location.
Relieve - To eliminate the pressure or force on a part or system to reduce a pressure, load, or weight on a device.
Remove - To take off.
Replace - To put back in place.
Rotate - Counter Clockwise - To turn on an axis. To alternate position or orientation, for the purpose of achieving even wear.
Tighten - To make nearer, to fully stretch, without slack, or to apply tension or torque.Machine Preparation
Illustration 2 g06181614
Illustration 3 g06181622
Illustration 4 g06303840
Refer to the Operation and Maintenance Manual , Machine Preparation for Troubleshooting for the machine that is being worked on in order to release system pressure.
Illustration 5 g06181692Location of Rework
Illustration 6 g06287569Rework Procedure
Illustration 7 g06287850
Illustration 8 g06304138
Illustration 9 g06304142